8" relined, shoe measures 32mm wide,axle set, exchange, 1957-on,
Parts
8" drum exchange relined item. 55-57, exchange item
brake pull off spring used front on 7" brake drums. overall length 94mm, 12.2mm diameter, 4 required per axle.
brake pull off return spring, used front . overall length 94mm, 14.6mm diameter, 4 piece required per axle.
Snail cam adjuster, for applications with girling brakes. Girling part ref GA9 / 64271022 also applicable to Cortina Mk1 1200, Escort Mk1, Triumph Herald, Reliant, Vauxhall Viva HA, HB and HC and...
Re-manufactured right hand front wheel cylinder 53-57, aluminium body with slot piston, 3/4" bore, Girling part 390311, also fits Isetta and Standard 8.
Re-manufactured left hand front wheel cylinder 53-57, aluminium body with slot piston, 3/4" bore, Girling part 390310, also fits Isetta and Standard 8.
rear brake hand brake operating lever with pivot pin for 8" brakes, fitted 02/57 to 07.62.
'55 onwards, axle set, suits cross head piston and later flat top. Girling reference SP 2027
Application - brake and clutch, note the connecting rod will require changing for the original on vehicle, depending on application.
replacement bleed nipple for brake slave cylinders, 3/8" UNF thread
8" drum, relined, shoe measures 32mm wide, exchange item, 1957-. axle set,
53-55, rear wheel cylinder for 7" brakes, alloy body, slot end to piston
Fits Standard 8 and 10 (1953 - 1957)
Fits Standard 8 and 10 (1953 - 1957)
55-57, rear wheel cylinder for 8" brakes, alloy body, cross head to piston
57-, alloy body, plain end to piston. used later 100E/300E, all 107E and 1198cc 105E/307E models. Girling ref 64673476. also applicble to Escort Mk1 and Cortina Mk1
Rear brake shoe pull off return spring set. Comprises 1 axle set - 4 springs. 2 off 100E-2297 and 2 off 100E-2296-B
Rear brake pull return spring, overall length 89mm, 9.4mm diameter,
Replacement rubber for clutch or brake pedal, 50mm wide x 71mm height
brake and clutch pedal shaft snap ring, secures pedals onto pedal shaft.
Part 100E-2663-C rubber inc wheel cylinder retaining plates E15-FB-1 & E15-FB-1 (one axle set)
rear wheel brake cylinder, alloy body, plain end to piston, used on 105E 997cc models and Cortina Mk1, Girling ref 64673049
copper brake pipe kit, to fit 105E/123E saloon models 1959-67, extra pipe supplied for 65-67 models that fits between rear junction and rear brake hose.
copper brake pipe kit, to fit 105E/123E/307E/309E estate/van models 1961-67
Brake shoe set (4 piece set), shoe measures 43mm wide, used on 1198cc 123E , also applicable to FRONT of: Bedford HA Van 6&8cwt HAE HAV 1970 onward Ford Cortina Mk1 1200 1962-64 Ford Escort...
Relined brake shoe set (4 piece set) used on 1198cc 123E , also applicable to Cortina Mk1 and Escort Mk1
9/32" x 1-3/16" hardened clevis pin, connects brake compression tube to rear brake compensator.
9/32" x 1-3/16" hardened clevis pin, connects brake compression tube to rear brake compensator.
9/32" x 1-3/16" hardened clevis pin, connects brake compression tube to rear brake compensator.
Axle set of springs, pins and washers. Girling ref SP1006/2
pin brake shoe roller, head approx 11mm dia x 2mm deep. shaft 13mm long under head to pin hole shaft diameter 8mm.
Fordson Thames Trader rear handbrake brake dust cover boot with metal base. used on ET6, ET7, 504E, 500E, and left hand drive models. rubber boot measures 80mm wide, 85mm tall, mounting plate 55mm...
four brake shoe set (used front or rear), 1 axle set, exchange item,
Axle set brake shoe linings (4 pieces) with rivets, all cars & 5cwt van 1937-59 with 10" brakes.
good used brake expander plunger, used on all cars with 10" brakes 1937 onwards
brake shoe retracting spring, dimensions overall length 150mm, coiled section 73mm long x 10mm diameter. 4 pieces required each axle.
good used brake adjuster housing complete with adjuster wedge and plungers, fit all cars 37 onwards,
good used brake adjuster wedge, threaded wedge which acts on the adjuster plungers 5/16 square on end.
good used r/h brake adjuster plunger, fits between adjuster wedge and brake shoe.
good used l/h brake adjuster plunger, fits between adjuster wedge and brake shoe.
good used brake expander cone, attaches to the end of the brake cable and operates the wedges.
16mm diameter x 35mm long with 6.5mm hole.
16mm diameter x 35mm long with 6.5mm hole.
Moulded part with metal base. Rubber boot 55mm x 31mm with a 6mm brake rod hole, base plate 95mm x 44mm with 8.5mm diameter holes, holes centres 75mm.
Rubber concertinaed brake rod cover, overall length 58mm with 40mm diameter base, hole for the brake rod is 4.8mm.
Front brake cross shaft, fits into pedal bracket assy and operates brake rod levers, LHD 10" rod brakes 1937-38.
Clevis yoke end, threaded 1/4" UNF. Hole for 9/32" diameter pin. 39mm long overall.
rear brakes lever assy, connects brake operating rod to rear brake cables 1937 on
rear brake cross rod/cable link assy, supports rear brake cross lever.
rear brake lever bar, bar for rear braker lever assy (7W-2563-A)
handbrake outer cable clamp, fits into the end of E62A-2811 pistol grip handbrake lever and holds the outer handbrake cable in place allowing inner handbrake cable to operate.
inner and outer cable assembly with threaded end.
please note that standard thread is 1/4"UNF thread, however some vehicles have had larger 5/16"UNF thread clevis yolks fitted.
please note that standard thread is 1/4"UNF thread, however some vehicles have had larger 5/16"UNF thread clevis yolks fitted.
inner and outer cable assembly with threaded end.
please note that standard thread is 1/4"UNF thread, however some vehicles have had larger 5/16"UNF thread clevis yolks fitted.
please note that standard thread is 1/4"UNF thread, however some vehicles have had larger 5/16"UNF thread clevis yolks fitted.
inner and outer cable assembly with threaded end.
please note that standard thread is 1/4"UNF thread, however some vehicles have had larger 5/16"UNF thread clevis yolks fitted.
please note that standard thread is 1/4"UNF thread, however some vehicles have had larger 5/16"UNF thread clevis yolks fitted.
clutch pedal and hand brake lever to rear link clevis pin, with shaped top to attach a return spring, overall length 34mm, clevis shank to split pin hole centre 19mm, diameter 7mm.
plunger with stud, 15mm diameter x 19mm deep with 19mm diameter flange, thread 1/4 unf.
threaded clevis yoke brake compression unit 1937-38, 10" brakes with rods.
new front brake cross rod lever repair shaft, new shaft manufactured to fit into the 7WF-2557-B brake lever base, overall length 102mm x 9.45mm dia, machined to press fit into base (8.75mm) with...
rear brake camshaft dust ring, fits between camshaft and housing keeps excess dirt out
used 1934 to 1937 model Y and all C.
diameter 12.5mm x overall 143.5mm.
4 piece required per axle.
diameter 12.5mm x overall 143.5mm.
4 piece required per axle.
axle set brake shoe linings (4 pieces) with rivets, Model Y & C 1934-37.
front brake operating pin. approx 132mm long - ball shape to one end, cup shape to other.
Prices shown include VAT @ 20% where applicable
