|
| 100E-6608-KIT - 100E oil pump gear repair kit |
 |
oil pump repair part for rebuild of 100E oil pump. kit comprises parts drive gear on shaft 100E-6608, idle gear 18-6610, 2 piece bearing 100E-6612 and pressure spring E01A-6654 |
| £27.50 for 1 each |
|
| 103E-13404/5 - 103E rear lamp (complete) |
 |
new complete lamp units as fitted to the ford 103E and 104E, comprising of new lens, new base with double contact bulb holder for rear and brake light (bulb reference No. B380 (12 volt) B382 (6 volt), |
| £86.10 for 1 pair |
|
| E93A-13407 - angled wing mounting rear lamp |
 |
angled wing mounting stop/tail lamp, as supplied by the ford motor co. for fitting to the E93A Prefect 1939 - 1948. supplied as a "ready to fit" lamp along with template for hole drilling, 61mm x 149 |
| £103.25 for 1 pair |
|
| E93A-17360 - Aquaplane of Oulton Broad revolution counter/tachometer |
 |
faithfully remanufactured Aquaplane Revolution Counter, 4" diameter rev counter head copied from an original reading 0 to 70 RPM x 100. black dial with white numerals and marked Aquaplane Oulton Broad |
| £230.30 for 1 packet |
|
| E93A-6200-SBS - big end shell bearing kit |
 |
replacement bearing shell set for piston to crank connecting shaft, specify size required. normal sizes suit crankshaft re-grinds less 0.010", less 0.020", less 0.030", less 0.040", less 0.050" to a |
| £54.60 for 1 engine set |
|
| E494A-17781 - bumper bar Anglia / Popular |
 |
chrome bumper bar with 2 bracket mounting holes for Anglia and Popular rear. note that base models were usually fitted with painted bumpers by works. |
| £160.00 for 1 each |
|
| E493A-17757-C - bumper bar front (with start handle hole) |
|
chrome bumper bar with mounting holes and hole for starting handle. please note that base models were fitted from works with painted bumper bar, Prefect always with chrome bumper bar |
| £160.00 for 1 each |
|
| E493A-17781 - bumper bar Prefect rear |
|
chrome bumper bar with 6 bracket mounting holes for Prefect rear |
| £160.00 for 1 each |
|
| E98/E99-AM-1 - chrome rear wing moulding |
 |
chrome moulding for rear body finish, offered in left and right pieces together as a pair. new manufacture |
| £31.00 for 1 pair |
|
| E243/244-PD-1 - chrome super wing finish trim chevron |
 |
front chrome chevron pints as fitted to Super model front wing/fender for two side strip end finish. offered as a pair only, one piece each E243-PD-1 and E244-PD-1 parts. |
| £29.60 for 1 pair |
|
| E93A-6200-REP - connecting rod - shell bearing conversion |
 |
piston to crankshaft connecting shaft with conversion to take shell bearing, includes small end bush fitted (you fit to your pin). specification cast in GGG50 and heat treated for strength and elastic |
| £55.00 for 1 each |
|
| YE-4209-F - crown wheel & pinion gear set 32-59 |
 |
standard ratio 5.5 to 1 (33 to 6 teeth) |
| £195.00 for 1 each |
|
| 100E-9430-B - exhaust manifold 100E |
 |
new casting for exhaust manifold. you will need to reuse your existing inlet manifold. please mote that the hot spot plate and gaskets are not supplied and need to be ordered separately
|
| £98.00 for 1 each |
|
| E93A-9430-A - exhaust manifold 8hp and 10hp |
 |
new casting for exhaust manifold. you will need to reuse your existing inlet manifold. please mote that the hot spot plate and gaskets are not supplied and need to be ordered separately |
| £98.00 for 1 each |
|
| AP-Y-6608-KIT - high volume oil pump conversion kit |
 |
oil pump repair part for rebuild and conversion of 8hp and 10hp oil pump to a high volume unit. the gears are some 1/3rd longer than standard to give the extra volume. kit comprises parts drive gear o |
| £47.50 for 1 each |
|
| E93A-17255 - LMB Speedometer head milometer |
 |
remanufactured LMB 4" diameter speedometer head copied from an original reading 0 to 120 (maybe a very brave driver!). black dial with white numerals and marked LMB logo. milometer and trip display.
|
| £257.25 for 1 |
|
| 356 - lucas model L494 lamp |
 |
remanufactured rear lamp as Lucas type L494 part. chrome finish on cast body with chrome plated fittings. offered with either clear glass lens (for reverse) OR red glass lens (for rear/rear fog light) |
| £35.00 for 1 each |
|
| 100E-6731-COV - oil filer adapter kit |
 |
oil filter kit to enable the fitting of modern spin off oil filter in place of the original paper element unit. this assembly bolts on into existing holes in the engine and the spin off filter fits in |
| £35.85 for 1 each |
|
| 105E-6731-COV - oil filter adapter kit |
 |
oil filter kit to enable the fitting of modern spin off oil filter in place of the original paper element unit on earlier oil pumps. this assembly bolts on into existing holes in the engine and the sp |
| £35.85 for 1 each |
|
| Y-6608-KIT - oil pump gear repair kit |
 |
oil pump repair part for rebuild of 8hp and 10hp oil pump. kit comprises parts drive gear on shaft Y-6608-B, idle gear Y-6610-B, 2 piece bearing BE-6612 and pressure spring E01A-6654 |
| £27.50 for 1 each |
|
| E506/7-AM-1 - rear boot super chrome spears |
 |
rear chrome spears fitted to 'super' model saloon. pear pair left and right.
one each E506-AM-1 and E507-AM-1 |
| £49.30 for 1 pair |
|
| 106E-3304-REP - steering drag link assembly - left hand drive |
 |
drag link assembly for left hand drive vehicle. supplied with replacement E20-LB-1 idler bush. |
| £68.75 for 1 each |
|
| 101E-3304-REP - steering drag link assembly - left hand drive |
|
drag link assembly for left hand drive vehicle. supplied with replacement E20-LB-1 idler bush. |
| £68.75 for 1 each |
|
| WOL-7006 - Wooler aluminium clutch cover |
 |
remanufactured aluminium gear box bell housing/clutch cover to the Wooler pattern. this enables the fitting of a 4 speed 105E Anglia type gearbox to a 100E engine. this was a period part to overcome t |
| £91.80 for 1 each |
|
