2. >
  4. >
  6. >

Camshaft and Valves for Ford - Eight, Model 7Y (1937 to 1939)

Search parts in this category

Parts

YE-6250 - Camshaft for gear driven engines
Price from: £164.52 each (£197.42 inc. VAT)
Standard profile camshaft - new made item (not a reground old unit) for gear driven engines (model Y, C or Eifel)
Please note that this camshaft has been hardened to Rockwell C 53 level, when...
details
100E-6250-E - camshaft
Price from: £165.30 each (£198.36 inc. VAT)
Standard profile camshaft - new made item (not a reground old unit) for chain driven engines. Please note that this camshaft has been hardened to Rockwell C 53 level, when fitted and running...
details
100E-6250-S - Camshaft sports profile 130RH
Price from: £203.59 each (£244.31 inc. VAT)
New made sports camshaft, not an old unit which has been reground).
Please note that this camshaft has been hardened to Rockwell C 53 level, when fitted and running engine, a running in oil must...
details
109E-6250-Kit - Pre-crossflow and crossflow 4 Cyl Camshaft Kit
Price from: £179.35 Each (£215.22 inc. VAT)
Pre-crossflow and crossflow cam shaft with wider lobe machined from billet steel. Later camshaft with the offset locating dowel, supplied with 105E-6256-B later sprocket - with two bolts part...
details
100E-6261/2/3 - Camshaft bearing set
Price from: £47.93 set (£57.52 inc. VAT)
Three part camshaft bearing set. Standard size only. Used on reconditioned earlier engines also.
Standard bore - 39.61mm to 39.62mm, Housing diameter 42.25mm to 42.27mm.
Bearing lengths -...
details
105E-6261/2/3-E - camshaft bearing set
Price from: £69.94 engine set (£83.93 inc. VAT)
three part camshaft bearing set. standard bore inner, standard size outer. this part is used through later model engines also.
details
105E-6261/2/3-US - camshaft bearing set - standard size outer, undersize inner
Price from: £82.88 set (£99.46 inc. VAT)
three part camshaft bearing set. standard bore inner, standard size outer. this part is used through later model engines also.

Standard outer - under size inner 0.002" or 0.010" limited availability.
details
105E-6261/2/3-E - camshaft bearing set - Standard size inner and outer
Price from: £69.94 engine set (£83.93 inc. VAT)
three part camshaft bearing set. standard bore inner, standard size outer. this part is used through later model engines also.

details
E93A-6256-A - Camshaft sprocket
Price from: £71.36 each (£85.63 inc. VAT)
New, re-manufactured timing chain camshaft sprocket, 40 teeth with timing mark - Please note there are two marks on the outer ring - the ARROW is the correct mark, not the dimple.
details
105E-6256-A - Camshaft sprocket for original 105E camshaft
Price from: £19.69 Each (£23.63 inc. VAT)
New timing chain camshaft sprocket, 34 teeth with timing mark.
details
105E-6256-B - Sprocket for remanufactured SFS camshaft 109E-6250
Price from: £36.61 Each (£43.93 inc. VAT)
New, re-manufactured timing chain camshaft sprocket, 34 teeth with timing mark.
details
2036-S7 - Camshaft sprocket bolt
Price from: £1.18 Each (£1.42 inc. VAT)
Camshaft sprocket bolt, 5/16"unc x 5/8" long.
details
E93A-6306-A - Crankshaft sprocket
Price from: £50.48 each (£60.58 inc. VAT)
New, re-manufactured timing chain crankshaft sprocket, 20 teeth with timing mark.
details
105E-6306-C - Crankshaft sprocket
Price from: £67.09 Each (£80.51 inc. VAT)
New, re-manufactured timing chain crankshaft sprocket, 17 teeth with timing mark.
details
YE-6280-A - camshaft thrust washer
Price from: £18.08 each (£21.70 inc. VAT)
details
B-6275/6 - Camshaft plunger & spring
Price from: £21.12 each (£25.34 inc. VAT)
Camshaft spring loaded plunger to control the end float of the camshaft.
Abutts against the E93A-6058 camshaft thrust plug.
Plunger is 30mm long x 17.5mm diameter with 12.8mm bore to accept the...
details
E93A-6058 - camshaft thrust plug
Price from: £10.08 each (£12.10 inc. VAT)
camshaft thrust plug, stepped plunger located at the front of the camshaft, fits into timing cover.
details
E93A-6270 - Timing chain
Price from: £36.22 each (£43.46 inc. VAT)
Endless double row timing chain, 52 link.
details
105E-6270-A - timing chain
Price from: £12.51 each (£15.01 inc. VAT)
Single width 46 link timing chain with link -application also Escort 1100 or 1300, Cortina Mk1 1300 or 1600, Capri 1300 or 1600, Consul Classic Capri, Corsair 1500, Cortina Mk2 1300, 1500 or...
details
E62-CP-7 - Timing chain tensioner - timing chain tensioner
Price from: £13.83 each (£16.60 inc. VAT)
TENSIONER
details
E87-CP-1 - timing chain tensioner assy - timing chain tensioner assy
Price from: £46.10 each (£55.32 inc. VAT)
timing chain tensioner assy, cast aluminium body with spring loaded knurled snail cam. timing chain tensioner assy, cast aluminium body with spring loaded knurled snail cam.
details
E93A-6253 - Camshaft sprocket dowel
Price from: £3.62 Each (£4.34 inc. VAT)
Camshaft to camshaft sprocket dowel, dimensions 13.9mm long, 7.2mm diameter with a 8mm shoulder. Fits :- 8/10hp, 100E, Consul, Zephyr
details
109E-6253 - Camshaft sprocket dowel
Price from: £3.42 Each (£4.10 inc. VAT)
Camshaft to camshaft sprocket dowel, dimensions 15mm overall length (4mm long major diameter, 11mm minor diameter), 6.4mm minor diameter and 8mm diameter shoulder. Fits 109E-6250 camshaft for pre...
details
105E-6258 - camshaft tag washer
Price from: £2.90 each (£3.48 inc. VAT)
camshaft lock washer, dimensions 58mm x 38mm with 35mm hole centres.
details
E1ADDN-6258 - cam sprocket tab washer
Price from: £5.90 each (£7.08 inc. VAT)
details
YE-6500-AJ - Adjustable tappet
Price from: £164.13 set (£196.96 inc. VAT)
Per engine set of 8 pieces. Minimum height 35mm maximum height 49mm. Please note that fitting these tappets enables the user to use shorter than original valves in engines if required.
details
100E-6500 - Valve tappet for 100E - Adjustable with set screw and lock nut
Price from: £19.29 each (£23.15 inc. VAT)
Re-manufactured adjustable valve tappet - complete with set screw and lock nut.
details
105E-6500-A - Valve tappet - 21.5mm diameter head
Price from: £69.86 set of 8 pieces (£83.83 inc. VAT)
Set of 8 pieces valve tappet. Standard head diameter - 21.5mm.
Overall length - 47.1mm, stem diameter 11.1mm, head diameter 21.5mm x 5mm thick.
For smaller headed version (20.3mm) for GT...
details
105E-6500-B - Valve tappet - 20.3mm diameter head
Price from: £87.64 set of 8 pieces (£105.17 inc. VAT)
Set of 8 pieces valve tappet. Smaller head diameter - 20.3mm - for GT camshaft
Overall length - 47.1mm, stem diameter 11.1mm, head diameter 20.3mm x 4mm thick.
For larger headed version (21.5mm)...
details
E93A-6505-B - Inlet valve - Short length 4 9/64"
Price from: £18.91 each (£22.69 inc. VAT)
Inlet valve 4 9/64" (105.15mm) long, head diameter 28.15mm, normally used on engines built in 1940
details
E93A-6505-E - Exhaust valve - Short length 4 9/64"
Price from: £24.18 each (£29.02 inc. VAT)
Standard exhaust quality valve 4 9/64" (105.15mm) long, head diameter 28.15mm, normally used on engines built during 1940
details
CE-6505-A - Inlet valve - Medium length, 4 7/32"
Price from: £18.94 each (£22.73 inc. VAT)
Inlet valve 4 7/32" (107.45mm) long, head diameter 27.8mm, normally used on engines built 1932 to 1939 period.
details
CE-6505-B - Exhaust valve - Medium length, 4 7/32"
Price from: £20.79 each (£24.95 inc. VAT)
Standard exhaust quality valve 4 7/32" (107.45mm) long, head diameter 28.15mm, normally used on engines built 1932 to 1939 period.
details
E93A-6505-F - Inlet/Exhaust valve - Long length, 4 11/32"
Price from: £20.65 each (£24.78 inc. VAT)
Exhaust quality, inlet or exhaust valve 4 11/32" (110.33mm) long, head diameter 28.15mm. See also E93A-6505-UN
details
E93A-6505-UN - Premium quality valve - Long length, 4 11/32"
Price from: £29.40 each (£35.28 inc. VAT)
Premium exhaust/inlet valve for modern fuels 4 11/32" (110.33mm) long, head diameter 28.15mm. Note - requires hard seat in the block.
details
E93A-6505-OS - Over size inlet valve - 31mm diameter head
Price from: £25.05 each (£30.06 inc. VAT)
Oversize head inlet valve, 31mm head diameter, 4.3/8" (111.13mm) long, for tuning purposes.
details
100E-6507 - Inlet valve
Price from: £17.64 each (£21.17 inc. VAT)
Standard inlet quality valve 107.20mm long, head diameter 29.33mm,
Stainless Steel
details
100E-6505-UN - Exhaust valve for unleaded
Price from: £23.16 each (£27.79 inc. VAT)
Standard size exhaust valve suitable for unleaded fuel, 107.20mm long, head diameter 26.80mm,
details
100E-6507-OS - valve, oversize inlet for 100E
Price from: £20.45 each (£24.54 inc. VAT)
oversize 1/16" (approx 1.5mm) than standard valve.
details
105E-6507 - inlet valve
Price from: £16.31 each (£19.57 inc. VAT)
105E type inlet valve. 97.50mm long, head diameter 32.00mm, offered with standard stem (nominal 5/16") ,and oversize stem of 0.003" (approx 0.076mm) and 0.015" (approx 0.38mm) diameter
details
105E-6507-D - inlet valve - standard stem
Price from: £16.31 each (£19.57 inc. VAT)
105E type inlet valve. 97.50mm long, head diameter 32.00mm, offered with standard stem (nominal 5/16") ,and oversize stem of 0.003" (approx 0.076mm) and 0.015" (approx 0.38mm) diameter

measures...
details
105E-6507-E - inlet valve - oversize 3 thou stem
Price from: £16.31 each (£19.57 inc. VAT)
105E type inlet valve. 97.50mm long, head diameter 32.00mm, offered with standard stem (nominal 5/16") ,and oversize stem of 0.003" (approx 0.076mm) and 0.015" (approx 0.38mm) diameter

measures...
details
105E-6507-F - inlet valve - oversize 15 thou stem
Price from: £16.31 each (£19.57 inc. VAT)
105E type inlet valve. 97.50mm long, head diameter 32.00mm, offered with standard stem (nominal 5/16") ,and oversize stem of 0.003" (approx 0.076mm) and 0.015" (approx 0.38mm) diameter

measures...
details
105E-6505 - exhaust valve
Price from: £16.31 each (£19.57 inc. VAT)
105E type exhaust valve. 97.50mm long, head diameter 30.15mm, offered with standard stem (nominal 5/16"), and oversize stem of 0.003" (approx 0.076mm) and 0.015" (approx 0.38mm) diameter
details
105E-6505-D - exhaust valve - standard stem
Price from: £16.31 each (£19.57 inc. VAT)
105E type exhaust valve. 97.50mm long, head diameter 30.15mm, offered with standard stem (nominal 5/16"), and oversize stem of 0.003" (approx 0.076mm) and 0.015" (approx 0.38mm) diameter

measures...
details
105E-6505-E - exhaust valve - oversize 3 thou stem
Price from: £16.31 each (£19.57 inc. VAT)
105E type exhaust valve. 97.50mm long, head diameter 30.15mm, offered with standard stem (nominal 5/16"), and oversize stem of 0.003" (approx 0.076mm) and 0.015" (approx 0.38mm) diameter

measures...
details
Y-6513 - Valve spring standard
Price from: £64.97 set (£77.96 inc. VAT)
Set of 8 pieces
details
6513-S - valve spring strong
Price from: £49.10 engine set (£58.92 inc. VAT)
sports valve spring, per engine set (8). specify 8/10hp or 100E engine. 100E are made to Terry V.S. 483 spec.
details
Y-6513-S - valve spring strong - 8 or 10 HP engine
Price from: £49.10 engine set (£58.92 inc. VAT)
sports valve spring, per engine set (8). specify 8/10hp or 100E engine. 100E are made to Terry V.S. 483 spec.

details
100E-6513-S - valve spring strong - 100E engine
Price from: £55.23 set of 8 (£66.28 inc. VAT)
sports valve spring, per engine set (8). specify 8/10hp or 100E engine. 100E are made to Terry V.S. 483 spec.

details
100E-6513 - Valve spring standard
Price from: £50.14 engine set (£60.17 inc. VAT)
100E standard strength valve spring, Set of 8 pieces.
Dimensions 50mm tall x 22mm diameter, 3.3mm diameter wire.
details
105E-6513-S - Performance valve spring set
Price from: £50.57 engine set (£60.68 inc. VAT)
Extra strong valve spring set (8 pieces) - approx dimensions 38.5mm tall, 28.5mm diameter, 4mm wire.
details
109E-6513 - Valve spring 4cyl
Price from: £50.52 Each (£60.62 inc. VAT)
Valve spring set, 8 pieces. approx dimensions 37.5mm long, 28mm diameter, 3.7mm wire diameter, Fits:- Consul Corsair Consul Classis Consul Capri
details
E93A-6510 - Valve guide, split type
Price from: £20.94 each (£25.13 inc. VAT)
Later type split valve guide with deep shoulder, eight per engine. Used 1939-59.
details
100E-6510 - Valve guide
Price from: £9.76 each (£11.71 inc. VAT)
100E engine inlet and exhaust vave guide. 55mm long x 12.7mm o/d x 8mm i/d.
details
E93A-6514-B - Retainer, valve spring
Price from: £7.38 each (£8.86 inc. VAT)
Hardened valve collar/collet.
details
YE-6057 - Hardened valve seat insert
Price from: £18.90 each (£22.68 inc. VAT)
For unleaded fuel. Requires machine work to engine block to fit this part. Dimensions 30.3mm o/d x 23.9mm i/d x 6.3mm thick.
details
E93A-6551-B - Gear Shaft
Price from: £55.51 Each (£66.61 inc. VAT)
oil pump and distributor drive shaft for CHAIN DRIVEN camshaft motor only, Will only fit later engines with chain driven camshaft.
details
Y-6551 - Gear shaft
Price from: £67.76 each (£81.31 inc. VAT)
Oil pump and distributor drive shaft for GEAR DRIVEN camshaft motor only, Will not fit later engines with chain driven camshaft.
details
119074-ES - Flywheel/camshaft sprocket bolt
Price from: £2.69 each (£3.23 inc. VAT)
Flywheel and camshaft sprocket bolt, 4 required for flywheel, 3 required for camshaft sprocket, 5/16 UNF X 3/4" long.
details
Prices shown include VAT @ 20% where applicable