Block

Aids cooling of valves by diverting water from main gallery towards valve chambers, often missing from engines due to corrosion, slots into block behind water pump, brass

Stainless steel cup shape type core plug, approx dimensions 42.8mm diameter, 5.8mm cup depth, overall thickness 7.2mm - 3 pieces required

used in end of camshaft, 1.74" diameter.

Re-manufactured dip stick tube, 184mm long, threaded at one end, formed and crimped on the other, can be shortened to suit 8/10hp and 100E engines (see illustrated sheet) then cut end needs to be...

Petrol pump to block stud, use with 1/4" (6mm) thick gasket
1-7/16" long x 5/16", UNC thread into the block (3/8" long) UNF thread to accept a nut (1/2" long)

aluminium cover suitable for 8/10hp & 100E. weight .640kg

Aluminium cover suitable for 8/10hp & 100E with rev counter drive and camshaft fitting

Exhaust & inlet manifold to block stud.
1-3/4" long x 5/16", UNC thread into the block (3/8" long) UNF thread to accept a nut (1/2" long)
Ford as factory always used steel manifold nuts,...

Good used oil pump and distributor drive gear dowel, this has to be removed to take distributor drive