100E Piston Set - set of 4 pistons complete with rings, pins, clips etc. available in the following sizes. standard, oversize 0.010" (+10), oversize 0.020" (+20), oversize 0.030" (+30), oversize...
Crankshaft, Connecting Rod and Piston
Help and Instructions
-
Crankshaft, connecting rod and piston torque settings
Nut tightening torque data:
8hp and 10hp engine main bearing cap nuts 45 to 50 lb./ft.- 60 to 67 Nm. big-end cap OEM nuts 30 lb./ft.- 40 Nm. big-end self locking nuts 20 to 23 lb./ft.- 27 to 31 Nm.
100E engine main bearing bolt 55 to 60 ft./lb.- 74 to 81 Nm. big-end cap, OEM nut 20 to 25 lb./ft.- 27 to 33 Nm. big-end self locking nuts 3lb./ft.- 4 Nm.
105E/123E engine main bearings 55 to 60 ft./lb.- 74 to 81 Nm. big-end cap 20 to 25 lb./ft.- 27 to 33 Nm.Please Note :- for our replacement con rods E93A-6200-REP and 100E-6200-REP with cap bolts, these should be tightened to 20 to 25 lbs ft with Loctite Threadlocker or equivalent applied.
-
Piston Fitting & Clearances
-
piston ring gaps & fitting
Parts
100E Piston Set - set of 4 pistons complete with rings, pins, clips etc. available in the following sizes. standard, oversize 0.010" (+10), oversize 0.020" (+20), oversize 0.030" (+30), oversize...
100E Piston Set - set of 4 pistons complete with rings, pins, clips etc. available in the following sizes. standard, oversize 0.010" (+10), oversize 0.020" (+20), oversize 0.030" (+30), oversize...
100E Piston Set - set of 4 pistons complete with rings, pins, clips etc. available in the following sizes. standard, oversize 0.010" (+10), oversize 0.020" (+20), oversize 0.030" (+30), oversize...
100E Piston Set - set of 4 pistons complete with rings, pins, clips etc. available in the following sizes. standard, oversize 0.010" (+10), oversize 0.020" (+20), oversize 0.030" (+30), oversize...
100E Piston Set - set of 4 pistons complete with rings, pins, clips etc. available in the following sizes. standard, oversize 0.010" (+10), oversize 0.020" (+20), oversize 0.030" (+30), oversize...
100E Piston Set - set of 4 pistons complete with rings, pins, clips etc. available in the following sizes. standard, oversize 0.010" (+10), oversize 0.020" (+20), oversize 0.030" (+30), oversize...
100E Piston Set - set of 4 pistons complete with rings, pins, clips etc. available in the following sizes. standard, oversize 0.010" (+10), oversize 0.020" (+20), oversize 0.030" (+30), oversize...
Set of piston rings. Available in standard, oversize 0.010" (+10), oversize 0.020" (+20), oversize 0.030" (+30), oversize 0.040" (+40) , oversize 0.050" (+50), oversize 0.060" (+60). Supplied as...
Set of piston rings. Available in standard, oversize 0.010" (+10), oversize 0.020" (+20), oversize 0.030" (+30), oversize 0.040" (+40) , oversize 0.050" (+50), oversize 0.060" (+60). Supplied as...
Set of piston rings. Available in standard, oversize 0.010" (+10), oversize 0.020" (+20), oversize 0.030" (+30), oversize 0.040" (+40) , oversize 0.050" (+50), oversize 0.060" (+60). Supplied as...
Set of piston rings. Available in standard, oversize 0.010" (+10), oversize 0.020" (+20), oversize 0.030" (+30), oversize 0.040" (+40) , oversize 0.050" (+50), oversize 0.060" (+60). Supplied as...
Set of piston rings. Available in standard, oversize 0.010" (+10), oversize 0.020" (+20), oversize 0.030" (+30), oversize 0.040" (+40) , oversize 0.050" (+50), oversize 0.060" (+60). Supplied as...
Set of piston rings. Available in standard, oversize 0.010" (+10), oversize 0.020" (+20), oversize 0.030" (+30), oversize 0.040" (+40) , oversize 0.050" (+50), oversize 0.060" (+60). Supplied as...
Set of piston rings. Available in standard, oversize 0.010" (+10), oversize 0.020" (+20), oversize 0.030" (+30), oversize 0.040" (+40) , oversize 0.050" (+50), oversize 0.060" (+60). Supplied as...
Set of piston rings. Available in standard, oversize 0.010" (+10), oversize 0.020" (+20), oversize 0.030" (+30), oversize 0.040" (+40) , oversize 0.050" (+50), oversize 0.060" (+60). Supplied as...
Set of piston rings. Available in standard, oversize 0.010" (+10), oversize 0.020" (+20), oversize 0.030" (+30), oversize 0.040" (+40) , oversize 0.050" (+50), oversize 0.060" (+60). Supplied as...
Set of piston rings. Available in standard, oversize 0.010" (+10), oversize 0.020" (+20), oversize 0.030" (+30), oversize 0.040" (+40) , oversize 0.050" (+50), oversize 0.060" (+60). Supplied as...
Piston to crankshaft connecting shaft with conversion to take shell bearing, includes small end bush fitted (you fit to your pin). Specification - cast in GGG50 and heat treated for strength and...
Ford Anglia, Popular, Prefect and Squire 100E and 300E replacement bearing shell set for piston to crank connecting shaft - see fitments below. Specify size required. normal sizes suit crankshaft...
Ford Anglia, Popular, Prefect and Squire 100E and 300E replacement bearing shell set for piston to crank connecting shaft - see fitments below. Specify size required. normal sizes suit crankshaft...
Ford Anglia, Popular, Prefect and Squire 100E and 300E replacement bearing shell set for piston to crank connecting shaft - see fitments below. Specify size required. normal sizes suit crankshaft...
Ford Anglia, Popular, Prefect and Squire 100E and 300E replacement bearing shell set for piston to crank connecting shaft - see fitments below. Specify size required. normal sizes suit crankshaft...
Ford Anglia, Popular, Prefect and Squire 100E and 300E replacement bearing shell set for piston to crank connecting shaft - see fitments below. Specify size required. normal sizes suit crankshaft...
Ford Anglia, Popular, Prefect and Squire 100E and 300E replacement bearing shell set for piston to crank connecting shaft - see fitments below. Specify size required. normal sizes suit crankshaft...
Ford Anglia, Popular, Prefect and Squire 100E and 300E replacement bearing shell set for piston to crank connecting shaft - see fitments below. Specify size required. normal sizes suit crankshaft...
Ford Anglia, Popular, Prefect and Squire 100E and 300E replacement bearing shell set for piston to crank connecting shaft - see fitments below. Specify size required. normal sizes suit crankshaft...
Exchange item, reground 3 main and 4 big end/con rod journals. We cannot accept anything in as core unit unless 30 thou under maximum
one each both top & bottom. specify thickness. standard thickness measures approx 2.35mm. stocked in standard, +0.005" and 0.010".
0.005" oversize
0.005" oversize
one each both top & bottom. specify thickness. standard thickness measures approx 2.35mm. stocked in standard, +0.005" and 0.010".
0.010" oversize
0.010" oversize
one each both top & bottom. specify thickness. standard thickness measures approx 2.35mm. stocked in standard, +0.005" and 0.010".
standard
standard
one each both top & bottom. specify thickness. standard thickness measures approx 2.35mm. stocked in standard, +0.005" and 0.010".
one each both top & bottom. specify thickness. standard thickness measures approx 2.35mm. stocked in standard, +0.005" and 0.010".
standard
standard
one each both top & bottom. specify thickness. standard thickness measures approx 2.35mm. stocked in standard, +0.005" and 0.010".
standard
standard
one each both top & bottom. specify thickness. standard thickness measures approx 2.35mm. stocked in standard, +0.005" and 0.010".
standard
standard
Replacement crankshaft pulley for 100E engine, made from solid .
replacement bearing shell set for crankshaft main bearings, specify size required. normal sizes suit crankshaft re-grinds of standard, less 0.010", less 0.020", less 0.030", less 0.040", less...
replacement bearing shell set for crankshaft main bearings, specify size required. normal sizes suit crankshaft re-grinds of standard, less 0.010", less 0.020", less 0.030", less 0.040", less...
replacement bearing shell set for crankshaft main bearings, specify size required. normal sizes suit crankshaft re-grinds of standard, less 0.010", less 0.020", less 0.030", less 0.040", less...
replacement bearing shell set for crankshaft main bearings, specify size required. normal sizes suit crankshaft re-grinds of standard, less 0.010", less 0.020", less 0.030", less 0.040", less...
replacement bearing shell set for crankshaft main bearings, specify size required. normal sizes suit crankshaft re-grinds of standard, less 0.010", less 0.020", less 0.030", less 0.040", less...
replacement bearing shell set for crankshaft main bearings, specify size required. normal sizes suit crankshaft re-grinds of standard, less 0.010", less 0.020", less 0.030", less 0.040", less...
replacement bearing shell set for crankshaft main bearings, specify size required. normal sizes suit crankshaft re-grinds of standard, less 0.010", less 0.020", less 0.030", less 0.040", less...
replacement bearing shell set for crankshaft main bearings, specify size required. normal sizes suit crankshaft re-grinds of standard, less 0.010", less 0.020", less 0.030", less 0.040", less...
replacement bearing shell set for crankshaft main bearings, specify size required. normal sizes suit crankshaft re-grinds of standard, less 0.010", less 0.020", less 0.030", less 0.040", less...
For the Ford 100E, a newly manufactured aluminium rear bearing upper crankshaft oil seal, aluminium half moon housing that fits into the block and channels excess oil back into the sump.
replacement cylinder liner sleeve for engine block.
specifically sized for use once +90 thou oversize has been reached.
84.21mm outside
specifically sized for use once +90 thou oversize has been reached.
84.21mm outside
set of 4 pistons complete with rings, pins, clips etc. available in various over sizes.
set of 4 pistons complete with rings, pins, clips etc. available in various over sizes.
set of 4 pistons complete with rings, pins, clips etc. available in various over sizes.
set of 4 pistons complete with rings, pins, clips etc. available in various over sizes.
set of 4 pistons complete with rings, pins, clips etc. available in various over sizes.
set of 4 pistons complete with rings, pins, clips etc. available in various over sizes.
set of 4 pistons complete with rings, pins, clips etc. available in various over sizes.
set of piston rings. available in sizes listed
oversize 0.020"
oversize 0.020"
set of piston rings. available in sizes listed
oversize 0.030"
oversize 0.030"
set of piston rings. available in sizes listed
oversize 0.040"
oversize 0.040"
set of piston rings. available in sizes listed
oversize 0.045"
oversize 0.045"
set of piston rings. available in sizes listed
oversize 0.060"
oversize 0.060"
set of piston rings. available in sizes listed
Standard size
Standard size
Conrod little end bush. please note that this will require final ream and hone to suit piston pin once pressed into place, dimensions 26.5mm long, 22.4mm o/d, 20.4mm i/d.
New, re-manufactured timing chain crankshaft sprocket, 17 teeth with timing mark.
crankshaft thrust washer (2 piece set - upper and lower) supplied in plus 0.0025" (plus 2.5), plus 0.0050" (plus 5.0), plus 0.0075" (plus 7.5) and plus 0.0100" (plus 10). (please note that 0.010"...
crankshaft thrust washer (2 piece set - upper and lower) supplied in plus 0.0025" (plus 2.5), plus 0.0050" (plus 5.0), plus 0.0075" (plus 7.5) and plus 0.0100" (plus 10). (please note that 0.010"...
crankshaft thrust washer (2 piece set - upper and lower) supplied in plus 0.0025" (plus 2.5), plus 0.0050" (plus 5.0), plus 0.0075" (plus 7.5) and plus 0.0100" (plus 10). (please note that 0.010"...
crankshaft thrust washer (2 piece set - upper and lower) supplied in plus 0.0025" (plus 2.5), plus 0.0050" (plus 5.0), plus 0.0075" (plus 7.5) and plus 0.0100" (plus 10). (please note that 0.010"...
crankshaft thrust washer (2 piece set - upper and lower) supplied in plus 0.0025" (plus 2.5), plus 0.0050" (plus 5.0), plus 0.0075" (plus 7.5) and plus 0.0100" (plus 10). (please note that 0.010"...
crankshaft thrust washer (2 piece set - upper and lower) supplied in plus 0.0025" (plus 2.5), plus 0.0050" (plus 5.0), plus 0.0075" (plus 7.5) and plus 0.0100" (plus 10). (please note that 0.010"...
replacement bearing shell set for crankshaft main bearings, specify size required. normal sizes suit crankshaft re-grinds of standard, less 0.010", less 0.020", less 0.030", also less 0.040" to a...
replacement bearing shell set for crankshaft main bearings, specify size required. normal sizes suit crankshaft re-grinds of standard, less 0.010", less 0.020", less 0.030", also less 0.040" to a...
replacement bearing shell set for crankshaft main bearings, specify size required. normal sizes suit crankshaft re-grinds of standard, less 0.010", less 0.020", less 0.030", also less 0.040" to a...
replacement bearing shell set for crankshaft main bearings, specify size required. normal sizes suit crankshaft re-grinds of standard, less 0.010", less 0.020", less 0.030", also less 0.040" to a...
replacement bearing shell set for crankshaft main bearings, specify size required. normal sizes suit crankshaft re-grinds of standard, less 0.010", less 0.020", less 0.030", also less 0.040" to a...
replacement bearing shell set for crankshaft main bearings, specify size required. normal sizes suit crankshaft re-grinds of standard, less 0.010", less 0.020", less 0.030", also less 0.040" to a...
replacement bearing shell set for crankshaft main bearings, specify size required. normal sizes suit crankshaft re-grinds of standard, less 0.010", less 0.020", less 0.030", also less 0.040" to a...
replacement bearing shell set for crankshaft main bearings, specify size required. normal sizes suit crankshaft re-grinds of standard, less 0.010", less 0.020", less 0.030", also less 0.040" to a...
replacement bearing shell set for crankshaft main bearings, specify size required. normal sizes suit crankshaft re-grinds of standard, less 0.010", less 0.020", less 0.030", also less 0.040" to a...
replacement bearing shell set for crankshaft main bearings, specify size required. normal sizes suit crankshaft re-grinds of standard, less 0.010", less 0.020", less 0.030", also less 0.040" to a...
replacement bearing shell set for crankshaft main bearings, specify size required. normal sizes suit crankshaft re-grinds of standard, less 0.010", less 0.020", less 0.030", also less 0.040" to a...
Timing cover oil seal, front crankshaft seal. Dimensions - 52.48mm o/d x 35mm i/d x 8mm thick.
aluminium rear bearing upper crankshaft oil seal, aluminium half moon housing that fits into the block and channels excess oil back into the sump.
aluminium rear bearing lower crankshaft oil seal, aluminium half moon housing that fits into the sump and channels excess oil back into the sump.
Conrod small end bush. Please note that this will require a final ream and hone to suit piston gudgeon pin once pressed into place, dimensions 22mm long, 18.7mm o/d, 17mm i/d.
exchange item, reground 3 main and 4 conrod journals (core charge on this unit £50.00)
replacement bearing shell set for crankshaft main bearings, specify size required. normal sizes suit crankshaft re-grinds of standard, less 0.010", less 0.020", less 0.030", less 0.040", less...
replacement bearing shell set for crankshaft main bearings, specify size required. normal sizes suit crankshaft re-grinds of standard, less 0.010", less 0.020", less 0.030", less 0.040", less...
replacement bearing shell set for crankshaft main bearings, specify size required. normal sizes suit crankshaft re-grinds of standard, less 0.010", less 0.020", less 0.030", less 0.040", less...
replacement bearing shell set for crankshaft main bearings, specify size required. normal sizes suit crankshaft re-grinds of standard, less 0.010", less 0.020", less 0.030", less 0.040", less...
replacement bearing shell set for crankshaft main bearings, specify size required. normal sizes suit crankshaft re-grinds of standard, less 0.010", less 0.020", less 0.030", less 0.040", less...
replacement bearing shell set for crankshaft main bearings, specify size required. normal sizes suit crankshaft re-grinds of standard, less 0.010", less 0.020", less 0.030", less 0.040", less...
replacement bearing shell set for crankshaft main bearings, specify size required. normal sizes suit crankshaft re-grinds of standard, less 0.010", less 0.020", less 0.030", less 0.040", less...
replacement bearing shell set for crankshaft main bearings, specify size required. normal sizes suit crankshaft re-grinds of standard, less 0.010", less 0.020", less 0.030", less 0.040", less...
replacement bearing shell set for crankshaft main bearings, specify size required. normal sizes suit crankshaft re-grinds of standard, less 0.010", less 0.020", less 0.030", less 0.040", less...
Ford Anglia and Prefect 105E, 106E, 107E, 108E and 307E replacement bearing shell set for piston to crank connecting shaft (see fitments below). Specify size required. normal sizes suit crankshaft...
Ford Anglia and Prefect 105E, 106E, 107E, 108E and 307E replacement bearing shell set for piston to crank connecting shaft (see fitments below). Specify size required. normal sizes suit crankshaft...
Ford Anglia and Prefect 105E, 106E, 107E, 108E and 307E replacement bearing shell set for piston to crank connecting shaft (see fitments below). Specify size required. normal sizes suit crankshaft...
Ford Anglia and Prefect 105E, 106E, 107E, 108E and 307E replacement bearing shell set for piston to crank connecting shaft (see fitments below). Specify size required. normal sizes suit crankshaft...
Ford Anglia and Prefect 105E, 106E, 107E, 108E and 307E replacement bearing shell set for piston to crank connecting shaft (see fitments below). Specify size required. normal sizes suit crankshaft...
Ford Anglia and Prefect 105E, 106E, 107E, 108E and 307E replacement bearing shell set for piston to crank connecting shaft (see fitments below). Specify size required. normal sizes suit crankshaft...
Ford Anglia and Prefect 105E, 106E, 107E, 108E and 307E replacement bearing shell set for piston to crank connecting shaft (see fitments below). Specify size required. normal sizes suit crankshaft...
E93A engine, 10hp Piston Set (Tall) - set of 4 pistons complete with rings, pins, clips etc. available in the following sizes. standard, oversize 0.010" (+10), oversize 0.020" (+20), oversize...
E93A engine, 10hp Piston Set (Tall) - set of 4 pistons complete with rings, pins, clips etc. available in the following sizes. standard, oversize 0.010" (+10), oversize 0.020" (+20), oversize...
E93A engine, 10hp Piston Set (Tall) - set of 4 pistons complete with rings, pins, clips etc. available in the following sizes. standard, oversize 0.010" (+10), oversize 0.020" (+20), oversize...
E93A engine, 10hp Piston Set (Tall) - set of 4 pistons complete with rings, pins, clips etc. available in the following sizes. standard, oversize 0.010" (+10), oversize 0.020" (+20), oversize...
E93A engine, 10hp Piston Set (Tall) - set of 4 pistons complete with rings, pins, clips etc. available in the following sizes. standard, oversize 0.010" (+10), oversize 0.020" (+20), oversize...
E93A engine, 10hp Piston Set (Tall) - set of 4 pistons complete with rings, pins, clips etc. available in the following sizes. standard, oversize 0.010" (+10), oversize 0.020" (+20), oversize...
set of piston rings. available in standard size, oversize 0.010" (+10), oversize 0.020" (+20), oversize 0.040" (+40) , oversize 0.050" (+50). supplied as a 3 or 4 ring per piston engine set.
set of piston rings. available in standard size, oversize 0.010" (+10), oversize 0.020" (+20), oversize 0.040" (+40) , oversize 0.050" (+50). supplied as a 3 or 4 ring per piston engine set.
set of piston rings. available in standard size, oversize 0.010" (+10), oversize 0.020" (+20), oversize 0.040" (+40) , oversize 0.050" (+50). supplied as a 3 or 4 ring per piston engine set.
set of piston rings. available in standard size, oversize 0.010" (+10), oversize 0.020" (+20), oversize 0.040" (+40) , oversize 0.050" (+50). supplied as a 3 or 4 ring per piston engine set.
set of piston rings. available in standard size, oversize 0.010" (+10), oversize 0.020" (+20), oversize 0.040" (+40) , oversize 0.050" (+50). supplied as a 3 or 4 ring per piston engine set.
set of piston rings. available in standard size, oversize 0.010" (+10), oversize 0.020" (+20), oversize 0.040" (+40) , oversize 0.050" (+50). supplied as a 3 or 4 ring per piston engine set.
set of piston rings. available in standard size, oversize 0.010" (+10), oversize 0.020" (+20), oversize 0.040" (+40) , oversize 0.050" (+50). supplied as a 3 or 4 ring per piston engine set.
set of piston rings. available in standard size, oversize 0.010" (+10), oversize 0.020" (+20), oversize 0.040" (+40) , oversize 0.050" (+50). supplied as a 3 or 4 ring per piston engine set.
set of piston rings. available in standard size, oversize 0.010" (+10), oversize 0.020" (+20), oversize 0.040" (+40) , oversize 0.050" (+50). supplied as a 3 or 4 ring per piston engine set.
set of piston rings. available in standard size, oversize 0.010" (+10), oversize 0.020" (+20), oversize 0.040" (+40) , oversize 0.050" (+50). supplied as a 3 or 4 ring per piston engine set.
set of piston rings. available in standard size, oversize 0.010" (+10), oversize 0.020" (+20), oversize 0.040" (+40) , oversize 0.050" (+50). supplied as a 3 or 4 ring per piston engine set.
set of piston rings. available in standard size, oversize 0.010" (+10), oversize 0.020" (+20), oversize 0.040" (+40) , oversize 0.050" (+50). supplied as a 3 or 4 ring per piston engine set.
set of piston rings. available in standard size, oversize 0.010" (+10), oversize 0.020" (+20), oversize 0.040" (+40) , oversize 0.050" (+50). supplied as a 3 or 4 ring per piston engine set.
set of 4 pistons complete with rings, pins, clips etc. available in the following sizes. standard, oversize 0.010" (+10), oversize 0.030" (+30), oversize 0.040" (+40) or oversize 0.060" (+60)....
set of 4 pistons complete with rings, pins, clips etc. available in the following sizes. standard, oversize 0.010" (+10), oversize 0.030" (+30), oversize 0.040" (+40) or oversize 0.060" (+60)....
set of 4 pistons complete with rings, pins, clips etc. available in the following sizes. standard, oversize 0.010" (+10), oversize 0.030" (+30), oversize 0.040" (+40) or oversize 0.060" (+60)....
set of 4 pistons complete with rings, pins, clips etc. available in the following sizes. standard, oversize 0.010" (+10), oversize 0.030" (+30), oversize 0.040" (+40) or oversize 0.060" (+60)....
set of 4 pistons complete with rings, pins, clips etc. available in the following sizes. standard, oversize 0.010" (+10), oversize 0.030" (+30), oversize 0.040" (+40) or oversize 0.060" (+60)....
set of piston rings. available in standard, oversize 0.020" (+20), oversize 0.030" (+30), oversize 0.040" (+40), oversize 0.060" (+60). supplied as a 3 or 4 ring per piston engine set.
set of piston rings. available in standard, oversize 0.020" (+20), oversize 0.030" (+30), oversize 0.040" (+40), oversize 0.060" (+60). supplied as a 3 or 4 ring per piston engine set.
set of piston rings. available in standard, oversize 0.020" (+20), oversize 0.030" (+30), oversize 0.040" (+40), oversize 0.060" (+60). supplied as a 3 or 4 ring per piston engine set.
set of piston rings. available in standard, oversize 0.020" (+20), oversize 0.030" (+30), oversize 0.040" (+40), oversize 0.060" (+60). supplied as a 3 or 4 ring per piston engine set.
set of piston rings. available in standard, oversize 0.020" (+20), oversize 0.030" (+30), oversize 0.040" (+40), oversize 0.060" (+60). supplied as a 3 or 4 ring per piston engine set.
set of piston rings. available in standard, oversize 0.020" (+20), oversize 0.030" (+30), oversize 0.040" (+40), oversize 0.060" (+60). supplied as a 3 or 4 ring per piston engine set.
set of piston rings. available in standard, oversize 0.020" (+20), oversize 0.030" (+30), oversize 0.040" (+40), oversize 0.060" (+60). supplied as a 3 or 4 ring per piston engine set.
set of piston rings. available in standard, oversize 0.020" (+20), oversize 0.030" (+30), oversize 0.040" (+40), oversize 0.060" (+60). supplied as a 3 or 4 ring per piston engine set.
set of piston rings. available in standard, oversize 0.020" (+20), oversize 0.030" (+30), oversize 0.040" (+40), oversize 0.060" (+60). supplied as a 3 or 4 ring per piston engine set.
set of piston rings. available in standard, oversize 0.020" (+20), oversize 0.030" (+30), oversize 0.040" (+40), oversize 0.060" (+60). supplied as a 3 or 4 ring per piston engine set.
set of piston rings. available in standard, oversize 0.020" (+20), oversize 0.030" (+30), oversize 0.040" (+40), oversize 0.060" (+60). supplied as a 3 or 4 ring per piston engine set.
replacement cylinder liner sleeve for engine block. 66.5mm Outer Diameter
Re-manufactured piston to crankshaft connecting rod. Integrated studs with conversion to take shell bearing. Includes small end bush fitted, (you fit to your pin). Specification cast in GGG50 and...
Replacement bearing shell set for piston to crank connecting shaft, specify size required. normal sizes suit crankshaft re-grinds less 0.010", less 0.020", less 0.030", less 0.040", less 0.050"...
Replacement bearing shell set for piston to crank connecting shaft, specify size required. normal sizes suit crankshaft re-grinds less 0.010", less 0.020", less 0.030", less 0.040", less 0.050"...
Replacement bearing shell set for piston to crank connecting shaft, specify size required. normal sizes suit crankshaft re-grinds less 0.010", less 0.020", less 0.030", less 0.040", less 0.050"...
Replacement bearing shell set for piston to crank connecting shaft, specify size required. normal sizes suit crankshaft re-grinds less 0.010", less 0.020", less 0.030", less 0.040", less 0.050"...
Replacement bearing shell set for piston to crank connecting shaft, specify size required. normal sizes suit crankshaft re-grinds less 0.010", less 0.020", less 0.030", less 0.040", less 0.050"...
Replacement bearing shell set for piston to crank connecting shaft, specify size required. normal sizes suit crankshaft re-grinds less 0.010", less 0.020", less 0.030", less 0.040", less 0.050"...
Replacement bearing shell set for piston to crank connecting shaft, specify size required. normal sizes suit crankshaft re-grinds less 0.010", less 0.020", less 0.030", less 0.040", less 0.050"...
Replacement bearing shell set for piston to crank connecting shaft, specify size required. normal sizes suit crankshaft re-grinds less 0.010", less 0.020", less 0.030", less 0.040", less 0.050"...
New, re-manufactured timing chain crankshaft sprocket, 20 teeth with timing mark.
Prices shown include VAT @ 20% where applicable
