Clear replacement moulded lens only for side & indicator lamp
Parts
moulded upper rear indicator lens, marked A-RI-55 with single bullseye circle
moulded replacement red lens, with double bullseye circles. three rear mounting studs. used on very early application where the pegs push into a rubber gasket.
moulded replacement red lens, with double bullseye circles. three screw holes in rim
moulded upper rear indicator lens, marked A-R1-55 with single bullseye circle.
New complete lamp units as fitted to the ford 103E and 104E, comprising of new lens, new base with double contact bulb holder for rear and brake light (12v or 6v bulbs sold separately), new...
formed metal base plate with bulbholder, sold in pair (car set) only.
Replacement red rear lamp lens for 103E popular. Please specify right hand (part 103E-13450) or left hand (part 103E-13451).
Replacement red rear lamp lens for 103E popular. Please specify right hand (part 103E-13450) or left hand (part 103E-13451).
Replacement red rear lamp lens for 103E popular. Please specify right hand (part 103E-13450) or left hand (part 103E-13451).
front right hand lens clear (triangular shape) marked A-FP1-59
Re-manufactured chrome plated casting for front side lamp (park lamp) and front flasher. We supply these in pair (car set) for you to transfer your lens and bulb holder etc.
rear amber top lens for saloon model, marked A-R1-59
New made, chrome plated saloon rear lamp housing - with bulb holders
Rear red lower lens for estate model, marked A2G61
7" sealed beam headlamp unit 12v 65/55watt, LHD, with side light window, three spade terminal connection. RHD unit also available.
front right hand lens amber (triangular shape) marked A-FP1-59
rear red top lens for saloon model, marked A-R1-59. export models
front left hand lens amber (triangular shape) marked A-FP1-59
Chrome plated bronze bracket for Lucas type headlamps such as the L140. Fits through a slot in the headlamp rim, and the base of the daisy headed rim fixing screw (part number 641) locates in the...
Silver painted bronze bracket for some Lucas type headlamps. Fits inside headlamp shell, the tongue fits through rim slot which then accepts a rim fixing screw through a plain 5mm diameter hole,...
7" sealed beam headlamp unit 12v 65/55watt, RHD, with side light window, three spade terminal connection. LHD unit also available.
rear red circular lower lens for saloon model, marked C-RTS-59. note this lens is supplied without rear foil.
Recessed lamp with rubber boot and body. Approximately 74mm diameter. Chrome rim with amber glass lens (25mm depth from mounting panel). Lucas model L488 with flat lens. Mounts through 35mm panel...
Recessed lamp - rubber boot/body (approx 74mm diam) chrome rim, clear glass lens (25mm depth from mount panel), Lucas model L488 with flat lens, mounts through 35mm panel hole. Supplied with a...
Recessed lamp with rubber boot and body. Approximately 74mm diameter. Chrome rim. Clear glass lens with AMBER bulb. 25mm depth from mounting panel. Lucas model L488 with flat lens. Mounts through...
Recessed stop and tail lamp with rubber boot and body (approx 74mm diameter), chrome rim and red glass lens. 25mm depth from mount panel. As Lucas model L488 with flat lens. Alternative part...
amber indicator upper right hand rear replacement lens, for October 1957 onward Thames 300E, Squire and Escort . please note that North America specification was red lens (part ref 301E-13329)
amber indicator upper right hand rear replacement lens, for October 1957 onward Thames 300E, Squire and Escort . please note that North America specification was red lens (part ref 301E-13329)
amber indicator upper right hand rear replacement lens, for October 1957 onward Thames 300E, Squire and Escort . please note that North America specification was red lens (part ref 301E-13329)
Indicator, stop & tail one piece red right hand replacement lens for early 1954-57 Thames 300E, Squire and Escort.
red stop/rear lower right hand replacement lens for October 1957 onward Thames 300E, Squire and Escort.
Red stop/rear lower left hand replacement lens for October 1957 onward Thames 300E, Squire and Escort.
rear amber top lens for panel van model, marked AV-RI-60.
rear red lower lens for panel van model, marked AV-RTS-60
rear red top lens for panel van model, marked AV-RI-60. export models
Remanufactured L494 type rear lamp. Chrome finish on cast body with chrome plated fittings. Body size 140mm wide x 75mm high x 68mm deep. Mounting stem approx 13mm. bulbholder BA15S. Suitable...
Remanufactured L494 type rear lamp. Chrome finish on cast body with chrome plated fittings. Body size 140mm wide x 75mm high x 68mm deep. Mounting stem approx 13mm. bulbholder BA15S. Suitable...
Remanufactured L494 type rear lamp. Chrome finish on cast body with chrome plated fittings. Body size 140mm wide x 75mm high x 68mm deep. Mounting stem approx 13mm. bulbholder BA15S. Suitable...
Nest with black plastic back shell for 7" light units - includes nest to body sealing ring/gasket, plated retaining rim holder and adjusters. This is a direct replacement for the Lucas type metal...
British Pre-focus headlamp unit complete with mounting kit. The reflector is equivalent to the Lucas 700 series unit. For Right Hand Drive (dip to left) vehicles. Complete and ready to install...
Metal headlamp bowl for standard 7" Lucas 700 series type light units. Three adjuster version. Supplied with metal back shell, chrome retaining rim holder and adjusters.
Headlamp mounting bolt - hollow, used on Butler type lamps. Thread 5/8" x 26 tpi ( ine thread). Measures approx 68mm long x 16mm thread diameter.
Hexagonal brass nut for headlamp, 5/8" x 26 tpi (fine thread). Approx 16mm bore. 10mm deep. 13/16" AF.
Reproduction of 7W type bulbous headlight glass, made from synthetic material, but when fitted looks identical to original. used 1938 to about 1945 only. approx 166mm diameter.
rear lamp bulbholder and base plate, formed metal base plate with bulbholder 140mm long x 35mm wide, with two captive nuts (128mm centres), double contact bulb holder with offset pins to suit...
Shaped glass red rear lamp lens, fits the E04A-13407 rear lamp, dimensions 86mm x 39mm with indents for fixing screws.
Single red lens 'Duolamp'. Gloss black powder coated housing with polished stainless steel rim, 97mm diameter. Body 60mm deep. One double contact BAY15D bulb holder. With or without number plate...
Single red lens 'Duolamp'. Gloss black powder coated housing with polished stainless steel rim, 97mm diameter. Body 60mm deep. One double contact BAY15D bulb holder. With or without number plate...
Single red lens 'Duolamp'. Gloss black powder coated housing with polished stainless steel rim, 97mm diameter. Body 60mm deep. One double contact BAY15D bulb holder. With or without number plate...
Stainless steel cover for rear of 211R, CA1265, CA1266, 958 'Duolamp; type lamps
Headlamp glass to reflector rectangular section cork sealing strip - 4.5mm x 7mm x 750mm long
Rear stop, tail and number plate lamp, single red oblong lens in black body 112mm x 50mm (measured at base) with clear side lens, double contact bulb holder, two mounting bolts with 44mm hole centres.
Silver painted bronze bracket. Fits inside headlamp rim, the tongue fits through the rim slot which then accepts rim fixing screw. Dimensions 36mm x 13mm, screw tongue 17mm wide x 13mm tall with...
7" Headlamp unit for British Pre-focus type bulbs, equivalent to Lucas 700 type. Please note that this part is marked right hand drive, though the actual bulb fitted can govern the dip pattern....
amber indicator upper left hand rear replacement lens, for October 1957 onward Thames 300E, Squire and Escort . please note that North America specification was red lens (part ref E143-NC-3)
amber indicator upper left hand rear replacement lens, for October 1957 onward Thames 300E, Squire and Escort . please note that North America specification was red lens (part ref E143-NC-3)
amber indicator upper left hand rear replacement lens, for October 1957 onward Thames 300E, Squire and Escort . please note that North America specification was red lens (part ref E143-NC-3)
moulded lower red lens cover marked A-RTS-57. transfer your old inner clear diffusa lens over (fitted with two small screws).
moulded upper orange lens cover marked A-RI-57. transfer your old inner clear diffusa lens over (fitted with two small screws).
moulded upper red lens cover marked A-R1-57. transfer your old inner clear diffusa lens over (fitted with two small screws).
Red reflector, diameter 58mm, integral threaded stud fixing.
Butler type headlamp screw/stud and catch barrel/boss.
7" Headlamp unit for British Pre-focus type bulbs, equivalent to the Lucas 700 type. With pilot hole for side lamp - push fit T10 WEDGE base bulb holder - please see part numbers B117B and B501...
Rear red reflector with metal surround with rear mounting stud and nut supplied. Approx 42mm diameter.
Painted cowl type number plate lamp with glass lens, two bolt mounting with 45mm hole centres, supplied with two cables fitted with terminals ( one bullet, one eyelet. ) and waterproof cable...
Angled wing mounting stop/tail lamp, as supplied by the Ford Motor Co. for fitting to the E93A Prefect 1939 - 1948. Supplied as a "ready to fit" lamp, 61mm x 149mm base x 53mm height (not...
new manufacture lamp rim, chrome on brass. as fitted to the E93A-13407 rear/stop light. measures 140mm x 51mm outside, 115mm x 44mm inside, 9mm deep. sold each
Headlight peak for 7" lights. Stainless steel with clips for behind inner headlight rim.
remade acrylic clear frosted sidelight lens for Model Y lamp.
Double contact bulbholder for headlamps with rear screw adjusting screw.
Prices shown include VAT @ 20% where applicable
