round aquaplane self adhesive decal, 110mm in diameter printed with Performance Equipment, Oulton Broad, England, By Aquaplane.
985.4641
89 search results found for "Aquaplane"
vehicle badge - Performance Equipment by Aquaplane Oulton Broad, England yellow and black enamel with chrome backing.. badge 50mm diameter, with single threaded retaining stud and nut to rear -...
974.3356
aquaplane script self adhesive sticker. white with black shadow 200mm long
879.95984
Cast iron exhaust manifold for 100E engine original Aquaplane refence number AP/1400
871.5635
Cast iron exhaust manifold for 8 or 10 hp engine original Aquaplane part reference 1400
871.5635
8/10hp aluminium bracket which fits to side of engine (see fitting instructions to see illustration of item in place on engine) for allowing mounting of dynamo to side of engine (on specials etc)....
871.5635
Alloy inlet manifold for fitting twin SU carburetors to 105E and 307E models. Weight approx 0.69kg
871.5635
Aquaplane alloy valve chest cover (if fitted to 100E there will be no breather)
871.20905
High quality reprint of original Ford Aquaplane manual. "The Aquaplane Company has please in presenting this brochure which describes a selection of Specialized Equipment designed to improve the...
869.31415
aluminium cover suitable for 8/10hp & 100E. weight .640kg
799.3691
with dynamo fitment. specify 3" (75mm dia) or 4" (100mm dia) dynamo size. we have modified the 4" unit so that it will accept fitment of 12 volt dynamo. see fitting instructions for picture of...
717.2586
with dynamo fitment. specify 3" (75mm dia) or 4" (100mm dia) dynamo size. we have modified the 4" unit so that it will accept fitment of 12 volt dynamo. see fitting instructions for picture of...
717.2586
with dynamo fitment. specify 3" (75mm dia) or 4" (100mm dia) dynamo size. we have modified the 4" unit so that it will accept fitment of 12 volt dynamo. see fitting instructions for picture of...
717.2586
Aquaplane alloy cylinder superhead for 10hp model. Weight approx 3.5kg.
712.2668
faithfully remanufactured Aquaplane Revolution Counter, 4" diameter rev counter head copied from an original reading 0 to 70 RPM x 100. black dial with white numerals and marked Aquaplane Oulton...
711.84296
Aluminium cover suitable for 8/10hp & 100E with rev counter drive and camshaft fitting
709.2901
Alloy inlet manifold for fitting twin SU carburettors @73 Deg, to the 8/10hp models listed below. Weight approx 0.69kg
709.2901
Alloy inlet manifold for fitting twin downdraft Solex carburetors, weight approx 0.7kg
709.2901
Aquaplane alloy cylinder superhead for 100E engine, weight approx 3.5kg. Compression ratio is approx 8 to 1. Please note that the main face of these heads feature a milled finish but will require...
708.85974
key ring fob - Performance Equipment by Aquaplane Oulton Broad, England yellow and black enamel key ring on black leather backing. badge 32mm diameter. plated ring. these are specially...
708.85974
lapel or cap pin - Performance Equipment by Aquaplane Oulton Broad, England
yellow and black enamel lapel or cap pin.
badge 20mm diameter. plated outer, retaining clasp to rear.
picture shows...
yellow and black enamel lapel or cap pin.
badge 20mm diameter. plated outer, retaining clasp to rear.
picture shows...
707.9872
Aquaplane full oil flow alloy valve chest cover , supplied with fittings and screws (without pipe).
598.37634
Performance Equipment by Aquaplane Oulton Broad, England badge bar mount badge.
yellow and black enamel with chrome backing.
badge 75mm diameter, with mounting flange to base - for fitting with...
yellow and black enamel with chrome backing.
badge 75mm diameter, with mounting flange to base - for fitting with...
593.39636
Cast aluminium oil cooler (as original Aquaplane pattern). 285mm wide, 230mm tall, 45mm deep, female 1/4 BSP inlet/outlet thread, mounting bracket 60mm tall with 85mm long base and 8mm bolt hole....
592.3871
supplied with steel insert face for clutch friction plate (as shown) or without for extra lightness. specify model 8/10hp or 100E. weights:- 8/10hp without insert - 2.60kgs 8/10hp with insert -...
465.8725
supplied with steel insert face for clutch friction plate (as shown) or without for extra lightness. specify model 8/10hp or 100E. weights:- 8/10hp without insert - 2.60kgs 8/10hp with insert -...
465.8725
supplied with steel insert face for clutch friction plate (as shown) or without for extra lightness. specify model 8/10hp or 100E. weights:- 8/10hp without insert - 2.60kgs 8/10hp with insert -...
465.8725
supplied with steel insert face for clutch friction plate (as shown) or without for extra lightness. specify model 8/10hp or 100E. weights:- 8/10hp without insert - 2.60kgs 8/10hp with insert -...
465.8725
supplied with steel insert face for clutch friction plate (as shown) or without for extra lightness. specify model 8/10hp or 100E. weights:- 8/10hp without insert - 2.60kgs 8/10hp with insert -...
465.8725
6 volt double contact BA15d (equal pin) or BAY15d (offset pin) base, 18/5 watt double filament bulb. Dimensions 18mm wide x 35mm tall with 15mm diameter cap. Use side/indicator, rear/indicator...
205.50185
6 volt double contact BA15d (equal pin) or BAY15d (offset pin) base, 18/5 watt double filament bulb. Dimensions 18mm wide x 35mm tall with 15mm diameter cap. Use side/indicator, rear/indicator...
205.50185
6 volt double contact BA15d (equal pin) or BAY15d (offset pin) base, 18/5 watt double filament bulb. Dimensions 18mm wide x 35mm tall with 15mm diameter cap. Use side/indicator, rear/indicator...
205.50185
stainless steel deep manifold nut for fitting aquaplane inlet/exhaust manifolds
169.73325
for use in 105E/123E engine, also on E93A and 100E Aquaplane head
168.43036
Steel cylinder head stud for Aquaplane alloy cylinder head. Per pack of 13 pieces (engine set)
167.31339
Hardened washers for alloy Aquaplane cylinder head (under bolt). Dimensions - 19mm o/d x 11.5mm i/d x 1.6mm thick. Packet of 14 pieces for engine.
135.70343
chemical black hardened washers for fitting under nuts on alloy Aquaplane cylinder head. packet of 13 pieces (engine set) 3/8"id, 3/4"od, 1/8" thick.
135.19318
Twin HS2 1 1/4" bore carburettor assembly complete with linkages and banjo fuel unions, for fitting to our Aquaplane inlet manifold. Set up for 10hp/100E, price is for a set up of two carburettor...
91.654526
Illustrated Small Ford Spares parts catalogue. Issue 1 - 72 pages of listed parts with diagrams, model identification and useful technical data for the Ford and Thames side valve vehicles built...
88.17181
Head gasket for 10hp Elva over-head valve conversion head, 139mm wide, 322mm long. Copper/non asbestos substitute/copper 1.9mm thick.
63.92639
Copper cylinder head gasket for higher tuned 100E engine. Cut from annealed soft sheet. 152mm wide, 358mm long (overall), 1mm thick.
63.92639
copper cylinder head gasket for higher tuned E93A engine, cut from annealed soft sheet. 138mm wide, 321mm long, 0.90mm thick.
63.92639
head gasket for 100E Elva ohv conversion head. 154mm wide, 362mm long (overall) Cut from annealed soft copper sheet 1.5mm thick.
63.92639
10mm steel plate for DIY (self build) inlet/exhaust manufacture, offered for 100E engine or E93A engine which will also fit on to the 8HP units.
63.92639
10mm steel plate for DIY (self build) inlet/exhaust manufacture, offered for 100E engine or E93A engine which will also fit on to the 8HP units.
63.92639
10mm steel plate for DIY (self build) inlet/exhaust manufacture, offered for 100E engine or E93A engine which will also fit on to the 8HP units.
63.92639
Steel plate to blank off fuel pump mount on engine block.
Dimensions :- 60mm wide x 42mm tall x 6mm thick with 44mm hole centres.
Dimensions :- 60mm wide x 42mm tall x 6mm thick with 44mm hole centres.
63.92639
remanufactured LMB 4" diameter speedometer head copied from an original reading 0 to 120 (maybe a very brave driver!). black dial with white numerals and marked LMB logo. mileometer and trip...
63.92639
New made sports camshaft, not an old unit which has been reground). Please note that this camshaft has been hardened to Rockwell C 53 level, when fitted and running engine, a running in oil must...
58.531094
New, re-manufactured timing chain camshaft sprocket, 40 teeth with timing mark - Please note there are two marks on the outer ring - the ARROW is the correct mark, not the dimple.
58.531094
Oversize head inlet valve, 31mm head diameter, 4.3/8" (111.13mm) long, for tuning purposes.
58.531094
sports valve spring, per engine set (8). specify 8/10hp or 100E engine. 100E are made to Terry V.S. 483 spec.
58.531094
sports valve spring, per engine set (8). specify 8/10hp or 100E engine. 100E are made to Terry V.S. 483 spec.
58.531094
sports valve spring, per engine set (8). specify 8/10hp or 100E engine. 100E are made to Terry V.S. 483 spec.
58.531094
oversize 1/16" (approx 1.5mm) than standard valve.
58.531094
Re-manufactured piston to crankshaft connecting rod. Integrated studs with conversion to take shell bearing. Includes small end bush fitted, (you fit to your pin). Specification cast in GGG50 and...
58.531094
Close ratio gear set for E93A gearbox cut as 20/28 tooth gear set to give a drive of 2.25 in first and 1.278 in second. new spigot bushes will be required in addition in both parts which we offer...
58.531094
Remanufactured aluminium gear box bell housing/clutch cover to the Wooler pattern. This enables the fitting of a 4 speed 105E Anglia type gearbox to a 100E engine. This was a period part to...
58.531094
Piston to crankshaft connecting shaft with conversion to take shell bearing, includes small end bush fitted (you fit to your pin). Specification - cast in GGG50 and heat treated for strength and...
58.531094
Extra strong valve spring set (8 pieces) - approx dimensions 38.5mm tall, 28.5mm diameter, 4mm wire.
58.531094
By Dave Turner, superb comprehensive hardback book, 192 pages full of information and history about Ford small horse power vehicles produced 1932 to 1962. Includes specials etc and covers model Y...
58.531094
Reprint of full January 1949 Enfo parts list with illustrations for 933cc and 1172cc cars and vans, with good coverage of the earlier models. Reproduced by kind permission of Ford Motor Company,...
58.531094
Reprint of full Enfo parts list with illustrations for 933cc & 1172cc cars and vans 1932 to 1959. Reproduced by kind permission of Ford Motor Company, UK. no VAT on books and publications
58.531094
How to build Ford based specials, details of modifications and tuning, workshop data.. Good 112 page comprehensive volume, no VAT on books and publications
58.531094
Reprint of Ford full workshop manual, covering model span, 276 pages, plenty of comprehensive information. A4 Format. Reproduced by kind permission of Ford Motor Company, UK. No VAT on books and...
58.531094
Reprint of Ford full workshop manual, covering 39-59, but applicable to earlier vehicles. 216 pages, plenty of comprehensive information. Reproduced by kind permission of Ford Motor Company, UK....
58.531094
Period publication produced to offer advice and information on special building, produced 1958/60, 60 pages, A4 format. no VAT on books and publications
58.531094
Reprint of full Enfo parts list with illustrations for the 100E/101E/300E range 1953 to 1962. covers all models Anglia, Prefect, Popular, Escort, Squire, Thames 5cwt & 7cwt vans. reproduced by...
58.531094
Period enthusiasts publication "compiled to help owners of 100E engines obtain a higher performance from their power unit". 74 page, soft cover. no VAT on books and publications
58.531094
The most authoritative of the Ford side valve tuning books, the reference guide for all aspiring competition car builders. 70 pages. Speed and Sports Publications 85113-005-4. We have a limited...
58.531094
Reprint of Scientific Instruments workshop manual, 90 pages covering 32-59. Lots of useful information. No VAT on books and publications
58.531094
Higher ratio for competition and sports use, 4.4 to 1 (35 to 8 teeth)
58.531094
Higher ratio for competition and sports use, 4.7 to 1 (33 to 7 teeth)
58.531094
Higher ratio for competition and sports use, 4.7 to 1 (33 to 7 teeth) from a long established UK manufacturer
58.531094
12 volt non ballasted sports coil, offered with push in HT wire connection only. Gives a stronger spark than the standard specification coil. Lucas part number DLB105. 55MM Dia. Push in HT lead....
49.50434
Camshaft to camshaft sprocket dowel, dimensions 13.9mm long, 7.2mm diameter with a 8mm shoulder. Fits :- 8/10hp, 100E, Consul, Zephyr
49.50434
Camshaft to camshaft sprocket dowel, dimensions 15mm overall length (4mm long major diameter, 11mm minor diameter), 6.4mm minor diameter and 8mm diameter shoulder.
Fits 109E-6250 camshaft for pre...
Fits 109E-6250 camshaft for pre...
49.50434
New, re-manufactured timing chain crankshaft sprocket, 20 teeth with timing mark.
42.85709
Hexagonal headed brass drain plug with flanged collar - offered in the following thread sizes 1/8" BSP, 1/4" BSP, 3/8" BSP, 1/2" BSP, 5/8" BSP, 3/4" BSP and 1" BSP.
330 - 1/8" BSP has a 13.8mm...
330 - 1/8" BSP has a 13.8mm...
29.406822
Hexagonal headed brass drain plug with flanged collar - offered in the following thread sizes 1/8" BSP, 1/4" BSP, 3/8" BSP, 1/2" BSP, 5/8" BSP, 3/4" BSP and 1" BSP.
330 - 1/8" BSP has a 13.8mm...
330 - 1/8" BSP has a 13.8mm...
29.406822
Hexagonal headed brass drain plug with flanged collar - offered in the following thread sizes 1/8" BSP, 1/4" BSP, 3/8" BSP, 1/2" BSP, 5/8" BSP, 3/4" BSP and 1" BSP.
330 - 1/8" BSP has a 13.8mm...
330 - 1/8" BSP has a 13.8mm...
29.406822
Hexagonal headed brass drain plug with flanged collar - offered in the following thread sizes 1/8" BSP, 1/4" BSP, 3/8" BSP, 1/2" BSP, 5/8" BSP, 3/4" BSP and 1" BSP.
330 - 1/8" BSP has a 13.8mm...
330 - 1/8" BSP has a 13.8mm...
29.406822
Hexagonal headed brass drain plug with flanged collar - offered in the following thread sizes 1/8" BSP, 1/4" BSP, 3/8" BSP, 1/2" BSP, 5/8" BSP, 3/4" BSP and 1" BSP.
330 - 1/8" BSP has a 13.8mm...
330 - 1/8" BSP has a 13.8mm...
29.406822
Hexagonal headed brass drain plug with flanged collar - offered in the following thread sizes 1/8" BSP, 1/4" BSP, 3/8" BSP, 1/2" BSP, 5/8" BSP, 3/4" BSP and 1" BSP.
330 - 1/8" BSP has a 13.8mm...
330 - 1/8" BSP has a 13.8mm...
29.406822
Hexagonal headed brass drain plug with flanged collar - offered in the following thread sizes 1/8" BSP, 1/4" BSP, 3/8" BSP, 1/2" BSP, 5/8" BSP, 3/4" BSP and 1" BSP.
330 - 1/8" BSP has a 13.8mm...
330 - 1/8" BSP has a 13.8mm...
29.406822
Hexagonal headed brass drain plug with flanged collar - offered in the following thread sizes 1/8" BSP, 1/4" BSP, 3/8" BSP, 1/2" BSP, 5/8" BSP, 3/4" BSP and 1" BSP.
330 - 1/8" BSP has a 13.8mm...
330 - 1/8" BSP has a 13.8mm...
29.406822
