• Home
  • Classic Ford Parts
  • Identification Charts
  • Diagrams
  • Clearance Items
  • Stock & Delivery
  • Terms & Conditions
  • News & Articles
  • Help & FAQs
  • Privacy Policy
  • Contact Us
  • Account Details
  • Log Out
  • Sign In
  • Register
Search Tax/Shipping Currency

Product Index

  • A
  • B
  • C
  • D
  • E
  • F
  • G
  • H
  • I
  • L
  • M
  • N
  • O
  • P
  • R
  • S
  • T
  • U
  • V
  • W
  • Y
  • Show All
  • Andre Hartford Shock Absorber
  • Badge Accessories
  • Badges
  • Bifurcated Rivet
  • Bonnet Catches
  • Bonnet Corner Rubber
  • Bonnet Hinge Fittings
  • Bonnet Hinge Strip
  • Bonnet Tape
  • Boot Handle
  • Brake Switch
  • Brush Set
  • Budget Locks & Key
  • Buffers & Stops
  • Bulbholders
  • Bulbs (Incandescent & Halogen Headlamp)
  • Bulbs (Incandescent & Halogen Other)
  • Bumper Bolt
  • Bumper Iron Cover
  • Calico
  • Cigar Lighter
  • Coolant
  • Cork Gasket
  • Dip Switch
  • Door Buffers
  • Door Handle (Exterior)
  • Door handle (Interior)
  • Door Hinge Pin and Balls
  • Door Seal
  • Draught Excluder
  • Electrical Terminals
  • Engine Oil
  • Escutcheons
  • Exhaust Fishtail
  • Exhaust Tape & Repair
  • Fibreboard
  • Fuel Additives
  • Fuel Filler Grommet
  • Fuel Pump (AC) Repair Kits
  • Furflex
  • GB & UK Plates
  • Gear Oil
  • Gearstick Rubber
  • Glazing Tool
  • Grease
  • Grease/Oil Nipples
  • Grommets
  • Headlamp
  • Headlamp Mount
  • Headlamp Rim
  • Headlamp Rim Catch
  • Ignition Accessories
  • Indicator Lamp
  • Inner Tubes & Rim Tape
  • Insulation Tape
  • Lamp Brackets
  • Lamp Spares
  • Leather Cloth
  • Licence Holders
  • Light Units
  • Lock Covers
  • Manifold Nut
  • Millboard
  • Mirror (Interior)
  • Number Plate
  • Number Plate Lamp
  • Oil
  • Oil Cans & Jugs
  • Over-rider Bead
  • Panel Clip
  • Pipe Fittings (Nuts, Nipples, Tees, Elbows, Unions etc.)
  • Plaques
  • Pull Switches
  • Pytchley Roof Clamp
  • Rear Lamps
  • Reflectors
  • Regulator and cut outs
  • Rubber Buffer
  • Rubber Drain Tubing
  • Rubber Extrusion
  • Screws (Wood)
  • Side Lamp
  • Silentbloc Bushes
  • Spanner Sets
  • Sponge Rubber (Other)
  • Sponge Rubber (Self Adhesive)
  • Starter Switches
  • Striker Plate
  • Sun Visor
  • Switches
  • Tape
  • Tools
  • Trim Clips
  • Tyre Inner Tube
  • Tyres
  • Upholstery Sundries
  • Valve Cap
  • Voltage Control Regulator
  • Wadding
  • Washers
  • Weatherstrip
  • Wheel Accessories & Trim
  • Wheel Balancing Cone
  • Window Channel
  • Window Lift Channel
  • Windscreen Washer, Jets & Wiper Sundries
  • Wing Piping
  • Wiper Arm
  • Wiper Blade
  • Wiper Motor
  • Wiper Spindle Grommet
  • Wiring Loom
  • Wiring Tools
  • Yoke Ends

  • 409 - Wiper arm idle pivot

    Wiper arm idle pivot
    Slave/idle wiper arm pivot with chrome domed nut, shaft size 3/16" diameter, bolts through 8mm hole in screen, for use with centre drive dual/tandem wiper sets. Chrome plated as standard, though we also offer nickel finish if required - please select your option below. Plated two part brass and steel assembly with circlip.
    Price From £22.75 / each (£27.3 inc. VAT) Details & Ordering

  • 408T-Chrome - Triple wiper assembly - Pre-war pattern, black chrome or nickel finish - Chrome

    Triple wiper assembly - Pre-war pattern, black chrome or nickel finish - Chrome
    Triple wiper arm assembly. Wiper arms adjustable 125mm to 190mm long. Link bar adjustable between approx 280mm to 650mm centres. Arms will suit 3/16" or 1/4" dia drive shafts, with removeable sleeves/ferrules. Slot end fitting for wiper blades (e.g. 370), secured by a rubber peg (372 or 372A). Wiper arm idle pivot (409) to be ordered separately if required. --
    Price From £149.06 / Each (£178.87 inc. VAT) Details & Ordering

  • 408T-Nickel - Triple wiper assembly - Pre-war pattern, black chrome or nickel finish - Nickel

    Triple wiper assembly - Pre-war pattern, black chrome or nickel finish - Nickel
    Triple wiper arm assembly. Wiper arms adjustable 125mm to 190mm long. Link bar adjustable between approx 280mm to 650mm centres. Arms will suit 3/16" or 1/4" dia drive shafts, with removeable sleeves/ferrules. Slot end fitting for wiper blades (e.g. 370), secured by a rubber peg (372 or 372A). Wiper arm idle pivot (409) to be ordered separately if required. --
    Price From £149.06 / Each (£178.87 inc. VAT) Details & Ordering

  • 408T:CONTAINER - Triple wiper assembly - Pre-war pattern, black chrome or nickel finish

    Triple wiper assembly - Pre-war pattern, black chrome or nickel finish
    Triple wiper arm assembly. Wiper arms adjustable 125mm to 190mm long. Link bar adjustable between approx 280mm to 650mm centres. Arms will suit 3/16" or 1/4" dia drive shafts, with removeable sleeves/ferrules. Slot end fitting for wiper blades (e.g. 370), secured by a rubber peg (372 or 372A). Wiper arm idle pivot (409) to be ordered separately if required.
    Price From £ / Each (£0 inc. VAT) Details & Ordering

  • 408A-nickel - Tandem wiper assembly - Centre drive, pre-war pattern, chrome or nickel finish - Nickel plated

    Tandem wiper assembly - Centre drive, pre-war pattern, chrome or nickel finish - Nickel plated
    Centre drive tandem wiper arm assembly. Wiper arms adjustable 125mm to 190mm long. Link bar adjustable to approx 650mm centres. Arms will suit 3/16" or 1/4" dia drive shafts (removable inner sleeves/ferrules). Slot end fittings for wiper blades (e.g. 370) secured by rubber pegs (372 or 372A). Order wiper arm slave/idle pivot (part number 409) separately if required. --
    Price From £143.20 / each (£171.84 inc. VAT) Details & Ordering

  • 408A-chrome - Tandem wiper assembly - Centre drive, pre-war pattern, chrome or nickel finish - Chrome plated

    Tandem wiper assembly - Centre drive, pre-war pattern, chrome or nickel finish - Chrome plated
    Centre drive tandem wiper arm assembly. Wiper arms adjustable 125mm to 190mm long. Link bar adjustable to approx 650mm centres. Arms will suit 3/16" or 1/4" dia drive shafts (removable inner sleeves/ferrules). Slot end fittings for wiper blades (e.g. 370) secured by rubber pegs (372 or 372A). Order wiper arm slave/idle pivot (part number 409) separately if required. --
    Price From £143.20 / each (£171.84 inc. VAT) Details & Ordering

  • 408A:CONTAINER - Tandem wiper assembly - Centre drive, pre-war pattern, chrome or nickel finish

    Tandem wiper assembly - Centre drive, pre-war pattern, chrome or nickel finish
    Centre drive tandem wiper arm assembly. Wiper arms adjustable 125mm to 190mm long. Link bar adjustable to approx 650mm centres. Arms will suit 3/16" or 1/4" dia drive shafts (removable inner sleeves/ferrules). Slot end fittings for wiper blades (e.g. 370) secured by rubber pegs (372 or 372A). Order wiper arm slave/idle pivot (part number 409) separately if required.
    Price From £ / each (£0 inc. VAT) Details & Ordering

  • CA738H - Hand operated windscreen wiper assembly

    Hand operated windscreen wiper assembly
    Stainless steel and chrome finished hand operated windscreen wiper arm and blade. Requires 1/4" (6mm) hole for mounting (handle detaches), 240mm long flat blade.
    Price From £39.57 / each (£47.48 inc. VAT) Details & Ordering

  • 408PRE - Tandem wiper assembly - Pre-war pattern, chrome or nickel finish

    Tandem wiper assembly - Pre-war pattern, chrome or nickel finish
    Tandem wiper assembly, chrome of nickel plate finish, of the pre-war pattern, with the tightening nut forward (to front). Arms adjustable 125mm to 190mm in length and will fit 3/16" or 1/4" drive shaft using coned collets (supplied), link bar adjustable 350mm to 650mm. Requires slot type blade - with blade held in place by rubber peg 372 or 372A. Please select you finish from the option box below.
    Price From £95.06 / each (£114.07 inc. VAT) Details & Ordering

  • 408 - Tandem wiper assembly - Post-war pattern, chrome finish

    Tandem wiper assembly - Post-war pattern, chrome finish
    Double arm, driven at end, tandem wiper assembly. Post war pattern (tightening nut at rear (to back) offered in chrome finish only. Arms adjustable 125mm to 190mm long. Link bar adjustable from 350mm to 650mm long. Arms will fit 3/16" or 1/4" drive shaft (removeable inner sleeves/ferrules). End fitting for slot type wiper blades (e.g. 370) secured with a rubber peg (372 or 372A) to be ordered separately.
    Price From £95.06 / each (£114.07 inc. VAT) Details & Ordering

  • 830W - Wiper arm - Spline shaft attachment, stainless, three blade fitting options - Wrist fitting

    Wiper arm - Spline shaft attachment, stainless, three blade fitting options - Wrist fitting
    Stainless steel wiper arm for spline fitting (13.00mm to 14.8mm size), adjustable in length from 170mm to 300mm long. Choice of blade end fitting - wrist OR 5.2mm or 7mm wide bayonet end (please specify). Please note that the price of wiper arms 7mm bayonet fitting is more expensive. --
    Price From £24.30 / each (£29.16 inc. VAT) Details & Ordering

  • 830S - Wiper arm - Spline shaft attachment, stainless, three blade fitting options - Slot fitting

    Wiper arm - Spline shaft attachment, stainless, three blade fitting options - Slot fitting
    Stainless steel wiper arm for spline fitting (13.00mm to 14.8mm size), adjustable in length from 170mm to 300mm long. Choice of blade end fitting - wrist OR 5.2mm or 7mm wide bayonet end (please specify). Please note that the price of wiper arms 7mm bayonet fitting is more expensive. -- Requires rubber peg for blade attachment - 372 or 372A
    Price From £26.41 / Each (£31.69 inc. VAT) Details & Ordering

  • 830B-7 - Wiper arm - Spline shaft attachment, stainless, three blade fitting options - Bayonet fitting - 7mm wide

    Wiper arm - Spline shaft attachment, stainless, three blade fitting options - Bayonet fitting - 7mm wide
    Stainless steel wiper arm for spline fitting (13.00mm to 14.8mm size), adjustable in length from 170mm to 300mm long. Choice of blade end fitting - wrist OR 5.2mm or 7mm wide bayonet end (please specify). Please note that the price of wiper arms 7mm bayonet fitting is more expensive. --
    Price From £26.74 / each (£32.09 inc. VAT) Details & Ordering

  • 830B-5 - Wiper arm - Spline shaft attachment, stainless, three blade fitting options - Bayonet fitting - 5.2mm wide straight

    Wiper arm - Spline shaft attachment, stainless, three blade fitting options - Bayonet fitting - 5.2mm wide straight
    Stainless steel wiper arm for spline fitting (13.00mm to 14.8mm size), adjustable in length from 170mm to 300mm long. Choice of blade end fitting - wrist OR 5.2mm or 7mm wide bayonet end (please specify). Please note that the price of wiper arms 7mm bayonet fitting is more expensive. --
    Price From £23.40 / each (£28.08 inc. VAT) Details & Ordering

  • 585 - Wiper arm, Trico pattern, shaft fit, wrist end - adjustable 225 - 265MM

    Wiper arm, Trico pattern, shaft fit, wrist end - adjustable 225 - 265MM
    Chrome plated adjustable wiper arm to suit 3/16" or 1/4" diameter drive shaft, for wrist fitting type blade. remanufactured to correct Trico pattern. adjusts from 225mm to 265mm long. alternatively we can offer all black original Trico arm, fixed length of 265mm, 1/4" shaft size. supplied straight, but stainless steel arm can easily be cranked as necessary
    Price From £24.36 / Each (£29.23 inc. VAT) Details & Ordering

  • 585s - Wiper arm - Spline shaft attachment, chrome, wrist end blade fitting

    Wiper arm - Spline shaft attachment, chrome, wrist end blade fitting
    Chrome plated adjustable wiper arm to fit standard 13.6mm spline drive shafts, for wrist fitting type blades. Re-manufactured to correct Trico pattern. Adjusts from 225mm to 265mm long. Supplied straight but the stainless steel arm can be cranked if required.
    Price From £25.08 / each (£30.1 inc. VAT) Details & Ordering

  • 585C - Wiper arm - Post war pattern, chrome, to suit 3/16" or 1/4" diameter drive shaft with wrist end fitting - Long arm

    Wiper arm - Post war pattern, chrome, to suit 3/16
    Chrome plated adjustable wiper arm to suit 3/16" or 1/4" diameter drive shafts, for wrist fitting type blades. Re-manufactured to correct Trico pattern. Adjustable to the following lengths: A - short - 140mm to 190mm B - medium - 190mm to 230mm C - long - 230mm to 265mm --
    Price From £27.51 / each (£33.01 inc. VAT) Details & Ordering

  • 585B - Wiper arm - Post war pattern, chrome, to suit 3/16" or 1/4" diameter drive shaft with wrist end fitting - Medium arm

    Wiper arm - Post war pattern, chrome, to suit 3/16
    Chrome plated adjustable wiper arm to suit 3/16" or 1/4" diameter drive shafts, for wrist fitting type blades. Re-manufactured to correct Trico pattern. Adjustable to the following lengths: A - short - 140mm to 190mm B - medium - 190mm to 230mm C - long - 230mm to 265mm --
    Price From £27.51 / each (£33.01 inc. VAT) Details & Ordering

  • 585A - Wiper arm - Post war pattern, chrome, to suit 3/16" or 1/4" diameter drive shaft with wrist end fitting - Short arm

    Wiper arm - Post war pattern, chrome, to suit 3/16
    Chrome plated adjustable wiper arm to suit 3/16" or 1/4" diameter drive shafts, for wrist fitting type blades. Re-manufactured to correct Trico pattern. Adjustable to the following lengths: A - short - 140mm to 190mm B - medium - 190mm to 230mm C - long - 230mm to 265mm --
    Price From £27.51 / each (£33.01 inc. VAT) Details & Ordering

  • 477PRE-N - Wiper arm - Pre-war pattern, chrome, to suit 3/16" or 1/4" diameter drive shafts with slot end fitting - Nickel

    Wiper arm - Pre-war pattern, chrome, to suit 3/16
    Plated finish adjustable wiper arm with tightening nut forward (to front). Re-manufactured to correct Trico prewar pattern. Supplied with shaft collets for 3/16" and 1/4" drive shaft fitting. Slot blade end fitting - blades are held in place with a rubber peg (372 or 372A). In Nickel plated finish - Offered in one size, adjustable 190mm to 230mm, but can be shortened. In Chrome - offered in three lengths: A - short - 140mm to 190mm B - medium - 190mm to 230mm C - long - 230mm to 265mm --
    Price From £29.13 / each (£34.96 inc. VAT) Details & Ordering

  • 477PRE-CC - Wiper arm - Pre-war pattern, chrome, to suit 3/16" or 1/4" diameter drive shafts with slot end fitting - Chrome - Long, 230mm to 265mm

    Wiper arm - Pre-war pattern, chrome, to suit 3/16
    Plated finish adjustable wiper arm with tightening nut forward (to front). Re-manufactured to correct Trico prewar pattern. Supplied with shaft collets for 3/16" and 1/4" drive shaft fitting. Slot blade end fitting - blades are held in place with a rubber peg (372 or 372A). In Nickel plated finish - Offered in one size, adjustable 190mm to 230mm, but can be shortened. In Chrome - offered in three lengths: A - short - 140mm to 190mm B - medium - 190mm to 230mm C - long - 230mm to 265mm --
    Price From £29.13 / each (£34.96 inc. VAT) Details & Ordering

  • 477PRE-BC - Wiper arm - Pre-war pattern, chrome, to suit 3/16" or 1/4" diameter drive shafts with slot end fitting - Chrome - Medium, 190mm to 230mm

    Wiper arm - Pre-war pattern, chrome, to suit 3/16
    Plated finish adjustable wiper arm with tightening nut forward (to front). Re-manufactured to correct Trico prewar pattern. Supplied with shaft collets for 3/16" and 1/4" drive shaft fitting. Slot blade end fitting - blades are held in place with a rubber peg (372 or 372A). In Nickel plated finish - Offered in one size, adjustable 190mm to 230mm, but can be shortened. In Chrome - offered in three lengths: A - short - 140mm to 190mm B - medium - 190mm to 230mm C - long - 230mm to 265mm --
    Price From £29.13 / each (£34.96 inc. VAT) Details & Ordering

  • 477PRE-AC - Wiper arm - Pre-war pattern, chrome, to suit 3/16" or 1/4" diameter drive shafts with slot end fitting - Chrome - Short, 140mm to 190mm

    Wiper arm - Pre-war pattern, chrome, to suit 3/16
    Plated finish adjustable wiper arm with tightening nut forward (to front). Re-manufactured to correct Trico prewar pattern. Supplied with shaft collets for 3/16" and 1/4" drive shaft fitting. Slot blade end fitting - blades are held in place with a rubber peg (372 or 372A). In Nickel plated finish - Offered in one size, adjustable 190mm to 230mm, but can be shortened. In Chrome - offered in three lengths: A - short - 140mm to 190mm B - medium - 190mm to 230mm C - long - 230mm to 265mm --
    Price From £29.13 / each (£34.96 inc. VAT) Details & Ordering

  • 477PRE:CONTAINER - Wiper arm - Pre-war pattern, chrome, to suit 3/16" or 1/4" diameter drive shafts with slot end fitting

    Wiper arm - Pre-war pattern, chrome, to suit 3/16
    Plated finish adjustable wiper arm with tightening nut forward (to front). Re-manufactured to correct Trico prewar pattern. Supplied with shaft collets for 3/16" and 1/4" drive shaft fitting. Slot blade end fitting - blades are held in place with a rubber peg (372 or 372A). In Nickel plated finish - Offered in one size, adjustable 190mm to 230mm, but can be shortened. In Chrome - offered in three lengths: A - short - 140mm to 190mm B - medium - 190mm to 230mm C - long - 230mm to 265mm
    Price From £29.13 / each (£34.96 inc. VAT) Details & Ordering

  • 477C - Wiper arm - Post-war pattern, chrome, to suit 3/16" or 1/4" diameter drive shafts with slot end fitting - Long arm

    Wiper arm - Post-war pattern, chrome, to suit 3/16
    Chromium plated adjustable wiper arm to suit 3/16" or 1/4" diameter drive shafts (removeable inner sleeve/ferrule). For slot type blades - held in place with a rubber peg (372 or 372A). Re-manufactured to the correct Trico pattern. Adjustable to the following lengths: A - short - 140mm to 190mm B - medium - 190mm to 230mm C - long - 230mm to 265mm --
    Price From £31.13 / each (£37.36 inc. VAT) Details & Ordering

  • 477B - Wiper arm - Post-war pattern, chrome, to suit 3/16" or 1/4" diameter drive shafts with slot end fitting - Medium arm

    Wiper arm - Post-war pattern, chrome, to suit 3/16
    Chromium plated adjustable wiper arm to suit 3/16" or 1/4" diameter drive shafts (removeable inner sleeve/ferrule). For slot type blades - held in place with a rubber peg (372 or 372A). Re-manufactured to the correct Trico pattern. Adjustable to the following lengths: A - short - 140mm to 190mm B - medium - 190mm to 230mm C - long - 230mm to 265mm --
    Price From £31.13 / each (£37.36 inc. VAT) Details & Ordering

  • 477A - Wiper arm - Post-war pattern, chrome, to suit 3/16" or 1/4" diameter drive shafts with slot end fitting - Short arm

    Wiper arm - Post-war pattern, chrome, to suit 3/16
    Chromium plated adjustable wiper arm to suit 3/16" or 1/4" diameter drive shafts (removeable inner sleeve/ferrule). For slot type blades - held in place with a rubber peg (372 or 372A). Re-manufactured to the correct Trico pattern. Adjustable to the following lengths: A - short - 140mm to 190mm B - medium - 190mm to 230mm C - long - 230mm to 265mm --
    Price From £31.13 / each (£37.36 inc. VAT) Details & Ordering

  • 477:CONTAINER - Wiper arm - Post-war pattern, chrome, to suit 3/16" or 1/4" diameter drive shafts with slot end fitting

    Wiper arm - Post-war pattern, chrome, to suit 3/16
    Chromium plated adjustable wiper arm to suit 3/16" or 1/4" diameter drive shafts (removeable inner sleeve/ferrule). For slot type blades - held in place with a rubber peg (372 or 372A). Re-manufactured to the correct Trico pattern. Adjustable to the following lengths: A - short - 140mm to 190mm B - medium - 190mm to 230mm C - long - 230mm to 265mm
    Price From £31.13 / each (£37.36 inc. VAT) Details & Ordering

  • 351C - Wiper arm - Pre-war pattern, BLACK, to suit 3/16" or 1/4" diameter drive shafts and slot end blade fitting - Long arm

    Wiper arm - Pre-war pattern, BLACK, to suit 3/16
    Black painted finish adjustable wiper arm to suit 3/16" or 1/4" diameter drive shafts (removeable inner sleeve/ferrule). For slot type blades - held in place with a rubber peg (372 or 372A). Re-manufactured to the correct Trico pattern. Adjustable to the following lengths: A - short - 140mm to 190mm B - medium - 190mm to 230mm C - long - 230mm to 265mm --
    Price From £30.36 / Each (£36.43 inc. VAT) Details & Ordering

  • 351A - Wiper arm - Pre-war pattern, BLACK, to suit 3/16" or 1/4" diameter drive shafts and slot end blade fitting - Short arm

    Wiper arm - Pre-war pattern, BLACK, to suit 3/16
    Black painted finish adjustable wiper arm to suit 3/16" or 1/4" diameter drive shafts (removeable inner sleeve/ferrule). For slot type blades - held in place with a rubber peg (372 or 372A). Re-manufactured to the correct Trico pattern. Adjustable to the following lengths: A - short - 140mm to 190mm B - medium - 190mm to 230mm C - long - 230mm to 265mm --
    Price From £30.36 / Each (£36.43 inc. VAT) Details & Ordering

  • 351:CONTAINER - Wiper arm - Pre-war pattern, BLACK, to suit 3/16" or 1/4" diameter drive shafts and slot end blade fitting

    Wiper arm - Pre-war pattern, BLACK, to suit 3/16
    Black painted finish adjustable wiper arm to suit 3/16" or 1/4" diameter drive shafts (removeable inner sleeve/ferrule). For slot type blades - held in place with a rubber peg (372 or 372A). Re-manufactured to the correct Trico pattern. Adjustable to the following lengths: A - short - 140mm to 190mm B - medium - 190mm to 230mm C - long - 230mm to 265mm
    Price From £30.36 / each (£36.43 inc. VAT) Details & Ordering

  • WT-17529 - Windscreen wiper arm for 1/4" diameter shaft - Wrist fitting

    Windscreen wiper arm for 1/4
    Stainless steel wiper arm to fit 1/4" diameter shafts with a nice, substantial clamp that tightens with an allen key socket bolt. Adjustable in length 6" to 8", to fit wrist type wiper blades.
    Price From £17.91 / each (£21.49 inc. VAT) Details & Ordering

  • CA738W - Windscreen wiper arm for 1/4" diameter shaft - Wrist fitting

    Windscreen wiper arm for 1/4
    Stainless steel adjustable wiper arm for 1/4" diameter wiper motor shafts. This arm has a strong sping to pull the blade on to the glass. Offered with three attachment options - for slot, bayonet or wrist end type blade fittings. Adjusts from very short (approx 130mm long) to a maximum of 270mm. --
    Price From £26.41 / each (£31.69 inc. VAT) Details & Ordering

  • CA738S - Windscreen wiper arm for 1/4" diameter shaft - Slot fitting

    Windscreen wiper arm for 1/4
    Stainless steel adjustable wiper arm for 1/4" diameter wiper motor shafts. This arm has a strong sping to pull the blade on to the glass. Offered with three attachment options - for slot, bayonet or wrist end type blade fittings. Adjusts from very short (approx 130mm long) to a maximum of 270mm. -- Blade held in place with a rubber peg (372 or 392A).
    Price From £26.41 / each (£31.69 inc. VAT) Details & Ordering

  • CA738B - Windscreen wiper arm for 1/4" diameter shaft - Bayonet fitting

    Windscreen wiper arm for 1/4
    Stainless steel adjustable wiper arm for 1/4" diameter wiper motor shafts. This arm has a strong sping to pull the blade on to the glass. Offered with three attachment options - for slot, bayonet or wrist end type blade fittings. Adjusts from very short (approx 130mm long) to a maximum of 270mm. --
    Price From £27.73 / each (£33.28 inc. VAT) Details & Ordering

  • CA738:CONTAINER - Windscreen wiper arm for 1/4" diameter shaft

    Windscreen wiper arm for 1/4
    Stainless steel adjustable wiper arm for 1/4" diameter wiper motor shafts. This arm has a strong sping to pull the blade on to the glass. Offered with three attachment options - for slot, bayonet or wrist end type blade fittings. Adjusts from very short (approx 130mm long) to a maximum of 270mm.
    Price From £ / each (£0 inc. VAT) Details & Ordering

  • CA395 - Windscreen wiper arm convertor - Shaft to spline

    Windscreen wiper arm convertor - Shaft to spline
    Adaptor to enable the fitting of a spline shaft wiper arm on to a shaft. Secures with a pinch bolt. Dimensions 20mm tall with a 19mm diameter base, central bore 6mm (7/32"), 13.6mm spline.
    Price From £7.90 / each (£9.48 inc. VAT) Details & Ordering

  • 351B - Wiper arm - Pre-war pattern, BLACK, to suit 3/16" or 1/4" diameter drive shafts and slot end blade fitting - Medium arm

    Wiper arm - Pre-war pattern, BLACK, to suit 3/16
    Black painted finish adjustable wiper arm to suit 3/16" or 1/4" diameter drive shafts (removeable inner sleeve/ferrule). For slot type blades - held in place with a rubber peg (372 or 372A). Re-manufactured to the correct Trico pattern. Adjustable to the following lengths: A - short - 140mm to 190mm B - medium - 190mm to 230mm C - long - 230mm to 265mm --
    Price From £30.36 / Each (£36.43 inc. VAT) Details & Ordering

  • 830:CONTAINER - Wiper arm - Spline shaft attachment, stainless, three blade fitting options

    Wiper arm - Spline shaft attachment, stainless, three blade fitting options
    Stainless steel wiper arm for spline fitting (13.00mm to 14.8mm size), adjustable in length from 170mm to 300mm long. Choice of blade end fitting - wrist OR 5.2mm or 7mm wide bayonet end (please specify). Please note that the price of wiper arms 7mm bayonet fitting is more expensive.
    Price From £ / each (£0 inc. VAT) Details & Ordering

  • 408-link kit - Tandem wiper link bar kit

    Tandem wiper link bar kit
    Stainless steel tandem wiper link bar kit, ideal for operating two wiper arms/blades if only one wheel box is powered. Existing wiper arms need to be drilled, fitting the brackets with rivets supplied. The kit comprises centre hollow tube (260mm long) with end ferrules fitted with slot headed screws, two side adjusting rods (178mm long) with drilled trunnions, two wiper arm brackets and six rivets. Adjusts between 310mm to 595mm.
    Price From £68.67 / Each (£82.4 inc. VAT) Details & Ordering
©Copyright Small Ford Spares | Edit Cookie Preferences