Chrome Fittings and Body Parts

Parts

Price from: £14.75 each (£17.70 inc. VAT)
2 hole female taper wedge - cast - base approx 55mm x 28mm. wedge is centre on the base.
please check before ordering.
Price from: £12.75 each (£15.30 inc. VAT)
2 hole female taper wedge - cast - base approx 55mm x 28mm. wedge is offset on the base.
please check before ordering.
Price from: £38.25 pair (£45.90 inc. VAT)
chrome rear quarter panel upper moulding extension trims - parts E512-AM-1 (right side) and E513-AM-1 (left side) as used on Super model sedan.
these are chrome on brass/bronze new castings with...
Price from: £12.75 each (£15.30 inc. VAT)
4 hole female taper wedge - cast bronze - base approx 61mm x 27mm
Price from: £12.75 each (£15.30 inc. VAT)
2 hole female taper wedge - cast - base approx 55mm x 28mm. wedge is offset on the base.
please check before ordering.
Price from: £50.40 each (£60.48 inc. VAT)
chrome plated reproduction outside locking door handle used on left or right front driver door Thames 400E model.
if two handles are ordered at same time we should be able to supply same key for...
Price from: £50.40 each (£60.48 inc. VAT)
chrome plated reproduction outside locking door handle used on side rear door Thames 400E model.
Price from: £54.60 each (£65.52 inc. VAT)
re-manufactured 7CWT chrome plate name plate for radiator grill panel (under bonnet panel) with Thames word plastic insert fitted. we offer the this with a moulded plastic rear engraved red...
Price from: £21.00 each (£25.20 inc. VAT)
enamel on chrome Prefect badge - fits into front bonnet trim 1949 to1953
Price from: £9.46 pair (£11.35 inc. VAT)
we offer replacement keys cut for door and ignition switch. these are cut to number only, 2 keys supplied. we restrict this to the key series -
key sequence numbers MRN1 through 50, FA501 through...
Price from: £13.65 each (£16.38 inc. VAT)
oval chrome finish and red enamelled badge with mounting stud "Anglia"

fit into bonnet ornament 8215
Price from: £39.90 each (£47.88 inc. VAT)
chrome plate name plate with red ANGLIA infill badge for mounting on to radiator grill panel (under bonnet panel). although NOT original part it is a good remake. we offer the this with a moulded...
Price from: £31.00 each (£37.20 inc. VAT)
chrome plated bonnet badge
Price from: £21.85 each (£26.22 inc. VAT)
chrome script badge
Price from: £16.85 each (£20.22 inc. VAT)
chrome Anglia script badge
Price from: £64.50 pair (£77.40 inc. VAT)
chrome plated 'a Ford product made in England' plaque, per pair (left and right side)
Price from: £64.50 pair (£77.40 inc. VAT)
chrome plated 'Ford' plaque, per pair (left and right side)
Price from: £13.15 each (£15.78 inc. VAT)
grill ornament mount, rechromed. straight top edge.
limited supply -


Price from: £26.60 each (£31.92 inc. VAT)
coloured roundel badge with chrome base for rear quarter panel. 5 gold star on red with plain off white outer. chrome base.
originally used September 1961 onwards.
Price from: £27.95 each (£33.54 inc. VAT)
early coloured roundel badge for rear quarter panel with rear chrome mounting. 5 gold star on red with light grey outer written Product of Ford Motor Co Ltd.
used to September 1961
Price from: £21.00 each (£25.20 inc. VAT)
grill ornament - new made
Price from: £31.00 each (£37.20 inc. VAT)
chrome plate on brass
Price from: £13.65 each (£16.38 inc. VAT)
oval chrome finish and blue enamelled badge with mounting stud 'Ford'

fit into bonnet ornament 8215

oval chrome finish and blue enamelled badge with mounting stud "Ford"
Price from: £13.65 each (£16.38 inc. VAT)
oval chrome finish and red enamelled badge with mounting stud 'Ford'

fit into bonnet ornament 8215
Price from: £23.65 each (£28.38 inc. VAT)
blue Ford emblem on silver back.
used approx 1966 onward and mounted to lower near side wing.
Price from: £13.65 each (£16.38 inc. VAT)
oval chrome finish and red enamelled badge with mounting stud "Ford Popular"

fit into bonnet ornament 8215
Price from: £11.85 each (£14.22 inc. VAT)
oval chrome finish badge with mounting stud "Ford Popular"

fit into bonnet ornament 8215
Price from: £22.50 each (£27.00 inc. VAT)
blue Ford emblem on silver back.
used mid 1961 onward - fixed to nearside front wing.
pins 50.5mm apart

also used on:
Ford Cortina, Escort & Consul
Price from: £17.55 each (£21.06 inc. VAT)
Ford triangle chrome wing badge with " FORD MOTOR COMPANY LTD. ENGLAND " engraved,
Price from: £13.65 each (£16.38 inc. VAT)
oval chrome finish and blue enamelled badge with mounting stud "Fordson"

fit into bonnet ornament 8215
Price from: £21.55 pair (£25.86 inc. VAT)
chrome dog leg ornament extension fitting off headlamp bezel on DeLuxe saloon and estate models.
we supply in car set (pair) only. E103-NB-1 for right hand and E104-NB-1 for left hand.
Price from: £31.00 each (£37.20 inc. VAT)
chrome plated bonnet badge
Price from: £15.95 each (£19.14 inc. VAT)
chrome
Price from: £31.00 each (£37.20 inc. VAT)
chrome plated bonnet badge
Price from: £16.00 each (£19.20 inc. VAT)
chrome
Price from: £19.15 each (£22.98 inc. VAT)
chromium
Price from: £18.81 each (£22.57 inc. VAT)
chromium script badge
Price from: £18.20 each (£21.84 inc. VAT)
chromium badge reading Popular
Price from: £19.15 each (£22.98 inc. VAT)
chromium, two stud fixing
Price from: £31.00 each (£37.20 inc. VAT)
chrome plate on brass
Price from: £22.70 each (£27.24 inc. VAT)
chrome plate round badge with black backing for rear quarter panel
Price from: £13.65 each (£16.38 inc. VAT)
oval chrome finish and blue enamelled badge with mounting stud "Thames"

fit into bonnet ornament 8215
Price from: £31.00 each (£37.20 inc. VAT)
chrome plate on brass bonnet badge
Price from: £0.05 (£0.06 inc. VAT)
we regret we do not cover paints or finishes, nor do we have paint swatch colour shades. please contact either of the following specialist paint suppliers Classic Car Paints Direct or The Car...
Price from: £0.05 (£0.06 inc. VAT)
we do NOT hold these parts, please contact
Price from: £1.60 each (£1.92 inc. VAT)
Moulding Clip/Rivet, for fixing body moulding strips to vehicle side, slides into the strip. arrow head push clip requires hole approx 10mm. will suit ford 100E with the 20.65mm side strips, to...
Price from: £0.50 each (£0.60 inc. VAT)
Moulding Clip/Rivet, for fixing body moulding strips to vehicle side. to fit moulding with approx 14mm gap supplied with fixing rivet for 3mm. sold each.
Price from: £0.95 each (£1.14 inc. VAT)
Moulding Clip/Rivet, for fixing body moulding strips to vehicle side. supplied with fixing rivet for 3mm hole. will suit ford 100E with the 16mm side strips, 1956 - 61. sold each.
Price from: £3.10 packet of 10 piecess (£3.72 inc. VAT)
Moulding Clip, for fixing body moulding strips to vehicle side. to fit moulding with approx 11mm gap (clip measurements on larger image) supplied with fixing rivet for 3mm hole. will suit ford...
Price from: £2.20 pkt 10 (£2.64 inc. VAT)
replacement plastic moulded side trim moulding clip/rivet, for fixing body moulding strips to vehicle side. to fit trims with 5.25mm gap (measurements on larger image). this clip is a moulding...
Price from: £32.56 pair (£39.07 inc. VAT)
chrome moulding for rear body finish, offered in left and right pieces together as a pair. new manufacture
Price from: £40.00 pair (£48.00 inc. VAT)
front chrome chevron pints as fitted to Super model front wing/fender for two side strip end finish. offered as a pair only, one piece each E243-PD-1 and E244-PD-1 parts.
Price from: £6.00 each (£7.20 inc. VAT)
black on aluminium, diagonal format, blank chassis commission plate, used until December 1964
Price from: £7.70 each (£9.24 inc. VAT)
2 diecast alloy jaws
Price from: £7.60 each (£9.12 inc. VAT)
2 diecast alloy jaws & 2 springs
Price from: £44.90 pair (£53.88 inc. VAT)
long chrome strip ornament which fits to early model side wing (fender) 1953 to 1957. offered in pairs only comprising 1 piece 100E-16188 and 1 piece 100E-16189
Price from: £3.00 each (£3.60 inc. VAT)
replacement hinge pin, standard size, dimensions 65mm overall length x 7.2mm stem diameter (knurling under head 7.5mm approx)
Price from: £9.46 each (£11.35 inc. VAT)
stainless steel ringed bonnet knob, 34mm diameter. with three engraved circles in face.
Price from: £8.95 each (£10.74 inc. VAT)
stainless steel bonnet catch knob, 28mm diameter
Price from: £0.50 each (£0.60 inc. VAT)
Moulding Clip/Rivet, for fixing body moulding strips to vehicle side. to fit moulding with approx 9mm gap (clip measurements on larger image) supplied with fixing rivet for 3mm hole. sold each.
Price from: £13.15 pair (£15.78 inc. VAT)
pre cut from original patern, rubber mud flap, fits to the bottom of the front wing, has pre cut holes and slot for wing brace, fitted to vehicles 1939 onwards. sold in pairs (2 parts = 1 car)...
Price from: £65.11 pair (£78.13 inc. VAT)
chrome on brass reproduction front mudguard 'dog leg' ornament. part 107E-16168 right hand and 107E-16169 left hand. sold in pairs only (1 left + 1 right).
Price from: £89.25 each (£107.10 inc. VAT)
remanufactured part. chrome on sand cast brass for mounting on to bonnet top up to 1957 on Prefect, Squire and Thames 7cwt. three studs on base pass through holes in bonnet panel.
Price from: £89.25 each (£107.10 inc. VAT)
remanufactured part. chrome on brass sand casting long strip for mounting on to bonnet top up to 1957 on Anglia, Escort and Thames 5cwt. studs on base pass through holes in bonnet panel.
Price from: £30.45 each (£36.54 inc. VAT)
new remanufacture to original pattern, chrome plated finish. fitted 1957 onward.
Price from: £4.56 each (£5.47 inc. VAT)
rest strip with screw kit
Price from: £11.85 each (£14.22 inc. VAT)
round dished plate with pull flat spring retaining clip
Price from: £28.95 each (£34.74 inc. VAT)
spoon end for grill top, chrome, 105mm long

fit badge 8213 in the oval
Price from: £25.00 each (£30.00 inc. VAT)
spoon end for grill top, chrome, 125mm long

fit badge 8213 in the oval
Price from: £51.45 each (£61.74 inc. VAT)
spoon end for grill top, chrome, short rad Y

fit badge 8213 in the oval
Price from: £57.75 each (£69.30 inc. VAT)
spoon end for grill top, chrome, long rad Y

fit badge 8213 in the oval
Price from: £57.75 each (£69.30 inc. VAT)
spoon end for grill top, chrome, model C and CX
fit badge 8213 in the oval
Price from: £25.00 each (£30.00 inc. VAT)
spoon end for grill top, chrome

fit badge 8213 in the oval
Price from: £64.45 pair (£77.34 inc. VAT)
boot lid chrome spears fitted to 'super' model saloon. per pair left and right. fit on the back edge of the boot from the handle plinth out towards the boot side edge, one each E506-AM-1 and E507-AM-1
Price from: £7.85 each (£9.42 inc. VAT)
size 49mm x 19mm, original fitment to outside Y/C
Price from: £7.85 each (£9.42 inc. VAT)
38mm x 27mm, original fitment to inside of Y/C
Price from: £18.90 each (£22.68 inc. VAT)
bonnet/hood catch supplied with pocket. polished stainless steel parts, 91mm tall overall, base 55mm wide. choice of 2 hole mount (13mm deep) or 3 hole mount (30mm deep).
Price from: £18.90 each (£22.68 inc. VAT)
bonnet/hood catch supplied with pocket. polished stainless steel parts, 91mm tall overall, base 55mm wide. choice of 2 hole mount (13mm deep) or 3 hole mount (30mm deep).

Price from: £22.50 each (£27.00 inc. VAT)
bonnet/hood catch supplied with pocket. polished stainless steel parts, 91mm tall overall, base 55mm wide. choice of 2 hole mount (13mm deep) or 3 hole mount (30mm deep).

Price from: £13.95 each (£16.74 inc. VAT)
bonnet catch plate for mounting to bonnet panel. base approx 72mm tall x 27mm wide.
Price from: £20.95 each (£25.14 inc. VAT)
stainless steel bonnet catch with T bar grip pattern. 95mm long, two screw base (mount holes 35mm centres) mounts horizontally.

Price from: £12.20 each (£14.64 inc. VAT)
chrome on brass fitting. base 48mm x 19mm, mounting holes 32mm centres.
Price from: £12.95 each (£15.54 inc. VAT)
chrome on brass fitting. base approx 45mm x 16mm, 28mm deep overall. mounting holes 31mm centres.
Price from: £11.00 each (£13.20 inc. VAT)
chrome on brass fitting. base 45mm x 16mm, mounting holes 32mm centres.
Price from: £11.00 each (£13.20 inc. VAT)
chrome plate on brass fitting with 1/4" (approx 6mm) hole. base 45mm x 15mm, mounting holes 31mm apart.
Price from: £11.65 each (£13.98 inc. VAT)
chrome plate on brass fitting with 1/4" (approx 6mm) hole. base 45mm x 15mm, mounting holes 31mm apart.
Price from: £46.45 each (£55.74 inc. VAT)
chrome on brass folded centre bonnet strip. 1270mm length (50") 21mm wide. side panels are folded and slide in place.
this part will need to be cut shorter by user for some applications.
Price from: £37.81 each (£45.37 inc. VAT)
chrome on brass folded centre bonnet strip, 845mm length (33.25") 21mm wide. side panels are folded and slide in place.
this part is offered in the longer length for the listed vehicles. the...
Price from: £28.95 each (£34.74 inc. VAT)
folded steel side strip for sliding into bonnet strip, 48"/1.22 metre long. weld to flat panel. 25mm overall width (flange 14mm)
Price from: £1.70 pkt of 10 (£2.04 inc. VAT)
copper bifurcated rivet, 7.5mm head, stem 3.8mm x 11mm. for fixing bonnet tape etc. per packet 10
Price from: £5.15 metre (£6.18 inc. VAT)
16mm wide x approx 4.5mm thick. this product is impregnated to produce a dark brown stiff beading (as original product) which will acts as the rubbing tape between bonnet (hood) and radiator cowl...
Price from: £0.00 each (£0.00 inc. VAT)
'Silent-travel' lock, as used on MG and other pre-war cars, chrome finish 63mm wide 75mm tall body, chrome cover. facility for shaft of exterior handle to fit into back. use striker plates...
Price from: £43.50 each (£52.20 inc. VAT)
'Silent-travel' lock, as used on MG and other pre-war cars, chrome finish 63mm wide 75mm tall body, chrome cover. facility for shaft of exterior handle to fit into back. use striker plates...
Price from: £43.50 each (£52.20 inc. VAT)
'Silent-travel' lock, as used on MG and other pre-war cars, chrome finish 63mm wide 75mm tall body, chrome cover. facility for shaft of exterior handle to fit into back. use striker plates...
Price from: £3.25 each (£3.90 inc. VAT)
cast malleable iron 38mm x 32mm, lock striker click/click
Price from: £8.10 each (£9.72 inc. VAT)
keyhole escutcheon - flap is hinged at the top and opens up against a spring. 2 hole (21mm centres)
fixing in base plate - chromium finish. approx 29mm diam.
Price from: £5.10 each (£6.12 inc. VAT)
budget lock, steel with brass tongue approx 79mm x 22mm.
Price from: £5.10 each (£6.12 inc. VAT)
budget lock, steel with brass tongue approx 79mm x 22mm.

Price from: £5.10 each (£6.12 inc. VAT)
budget lock, steel with brass tongue approx 79mm x 22mm.

Price from: £6.65 each (£7.98 inc. VAT)
flat base hook type budget lock. base 112mm x 25mm. select right hand or left hand please.
Price from: £6.65 each (£7.98 inc. VAT)
flat base hook type budget lock. base 112mm x 25mm. select right hand or left hand please.

Price from: £6.65 each (£7.98 inc. VAT)
flat base hook type budget lock. base 112mm x 25mm. select right hand or left hand please.

Price from: £9.50 each (£11.40 inc. VAT)
chrome plate bumper securing bolt for straight fluted bumper bar
Price from: £0.00 each (£0.00 inc. VAT)
chromium plated dome head bolt with flats beneath (supplied with washer and nut). choice of round head 14.5mm head diameter x 26mm long x 5/16" (approx 8mm) thread OR flat head 15.7mm head...
Price from: £1.75 each (£2.10 inc. VAT)
chromium plated dome head bolt with flats beneath (supplied with washer and nut). choice of round head 14.5mm head diameter x 26mm long x 5/16" (approx 8mm) thread OR flat head 15.7mm head...
Price from: £1.75 each (£2.10 inc. VAT)
chromium plated dome head bolt with flats beneath (supplied with washer and nut). choice of round head 14.5mm head diameter x 26mm long x 5/16" (approx 8mm) thread OR flat head 15.7mm head...
Price from: £4.75 each (£5.70 inc. VAT)
oval head chromium plate bumper bolt, 35mm x 22mm appox. 3/8BSW (approx 10mm) thread, 9.6mm square under head, length approx 32mm.
Price from: £9.80 each (£11.76 inc. VAT)
plastic ivory coloured moulded escutcheon (comprising base E0TTA-7322630 , spring E0TTA-7322624 and stainless ring E0TTA-7322632) offered as a unit.
Price from: £7.90 each (£9.48 inc. VAT)
chrome plate trim ring for handle and winder, 46mm diameter, centre hole approx 16mm.
Price from: £14.30 each (£17.16 inc. VAT)
replacement locking device with 2 keys for most outside handles fitted to Y and C through the 'Upright' range of car and van including E83W, overall length including cam peg 43mm.
all are FS...
Prices shown include VAT @ 20% where applicable