Shaped outside handle approx 100mm long fitted with mounting escutcheon, chromium plate finish. Offered locking or non locking. We offer this handle with a flat base escutcheon (35mm hole centres)...
Parts
Shaped outside handle approx 100mm long fitted with mounting escutcheon, chromium plate finish. Offered locking or non locking. We offer this handle with a flat base escutcheon (35mm hole centres)...
Shaped outside handle approx 100mm long fitted with mounting escutcheon, chromium plate finish. Offered locking or non locking. We offer this handle with a flat base escutcheon (35mm hole centres)...
Chrome plated handle 89mm long with oval escutcheon 23mm x 18mm. Short 5/16" (8mm) square shaft 18mm long (28mm including thread). Also fits Ford Dexta Major.
Chrome plated curved fluted locking external door handle for Ford 7Y, EO4C, E93A, E494A, 103E, 104E, EO4C & E494C.
Overall length 115mm with mounting escutcheon measures approximately...
Overall length 115mm with mounting escutcheon measures approximately...
Chrome plated curved fluted non-locking external door handle for Ford 7Y, EO4C, E93A, E494A, 103E, 104E, EO4C & E494C.
Overall length 115mm with mounting escutcheon measures...
Overall length 115mm with mounting escutcheon measures...
Chrome plated curved fluted non locking external door handle for E83W 10cwt.
Overall length 115mm with mounting escutcheon measures approximately 54mm overall with fixing hole centres...
Overall length 115mm with mounting escutcheon measures approximately 54mm overall with fixing hole centres...
Chrome plated curved fluted locking external door handle for E83W 10cwt.
Overall length 115mm with mounting escutcheon measures approximately 54mm overall with fixing hole centres approximately...
Overall length 115mm with mounting escutcheon measures approximately 54mm overall with fixing hole centres approximately...
Plain pattern 125mm long, chrome finish, escutcheon hole centres approx 34mm, locking. With 8mm square shaft 110mm long.
Plain pattern, non-locking,125mm long, chrome finish, escutcheon hole centres approx 34mm. With 8mm square shaft 50mm long.
Locking chrome plated swept type door handle, supplied in PAIRS only to suit left and right of vehicle. Escutcheon hole centres 36mm, Matched key sets.
Torpedo shaped outside handle approx 120mm long, fitted with mounting escutcheon with hole centres approx 34mm. Chromium plate finish. Please note that these handles are handed.
Torpedo shaped outside handle approx 120mm long, fitted with mounting escutcheon with hole centres approx 34mm. Chromium plate finish. Please note that these handles are handed.
Torpedo shaped outside handle approx 120mm long, fitted with mounting escutcheon with hole centres approx 34mm. Chromium plate finish. Please note that these handles are handed.
Torpedo shaped outside handle approx 120mm long, fitted with mounting escutcheon with hole centres approx 34mm. Chromium plate finish. Please note that these handles are handed.
Torpedo shaped outside handle approx 120mm long, fitted with mounting escutcheon with hole centres approx 34mm. Chromium plate finish. Please note that these handles are handed.
Chrome plated reproduction handle. For right hand front door of right hand drive model
chrome plated reproduction handle. for left hand front door of right hand drive model, all left hand rear doors.
Chrome plated reproduction handle. for left hand front door of left hand drive model
chrome plated reproduction handle. for right hand front door of left hand drive model, all right hand rear doors.
chrome plated reproduction outside locking door handle used on left or right front driver door Thames 400E model. if two handles are ordered at same time we should be able to supply same key for both.
new made outside door handles - offered as one each left and one right side of vehicle. with new key locking device fitted. sold in pairs only. see alternative listing without key device
Chrome plated reproduction outside locking door handle used on side rear door Thames 400E model.
new made outside door handles - offered as one each left and one right side of vehicle. without locking device - you fit your own old device. sold in pairs only.
Plain T boot handle approx 108mm, escutcheon hole centres 36mm, chrome plated. Available locking only.
8mm square shaft
8mm square shaft
Chrome plated T locking door handle, 99mm long fitted with mounting escutcheon with 35mm hole centres. Particularly suited to van rear doors. Shaft will require cutting to suit application.
'T' boot handle approx 95mm long, escutcheon hole centres 44mm, chrome plated.
'T' boot handle approx 95mm long, escutcheon hole centres 44mm, chrome plated.
'T' boot handle approx 95mm long, escutcheon hole centres 44mm, chrome plated.
'Silent-travel' lock, as used on MG and other pre-war cars, chrome finish 63mm wide 75mm tall body, chrome cover. Facility for shaft of exterior handle to fit into back. Use striker plate part...
'Silent-travel' lock, as used on MG and other pre-war cars, chrome finish 63mm wide 75mm tall body, chrome cover. Facility for shaft of exterior handle to fit into back. Use striker plate part...
'Silent-travel' lock, as used on MG and other pre-war cars, chrome finish 63mm wide 75mm tall body, chrome cover. Facility for shaft of exterior handle to fit into back. Use striker plate part...
Chrome plate on brass lever handle, 120mm long. Suits 3/8"/10mm square shaft.
Very popular classic interior door handle 109mm long. Cross pin fixing on to 3/8"/10mm square shaft which is parallel (see picture) to line of handle. Chrome plate finish
Interior lever handle 110mm long, chrome plate, fixed with screw through top. 5/16"/8mm square shaft size, can be fitted at various angles of incline.
Popular replacement chrome plated window regulator (window winder) handle, suitable for a wide range of classic Ford vehicles.
This handle fits onto a 3/8" (10mm) square shaft and...
Chrome plated spun brass trim ring for handle and winder, 46mm diameter, centre hole approx 16mm.
Plastic ivory coloured moulded escutcheon (comprising base E0TTA-7322630 , spring E0TTA-7322624 and stainless ring E0TTA-7322632) offered as a unit.
Spring loaded escutcheon for interior door handles and window winders. Chrome finish, approx 38mm diameter x 17mm high. Centre hole approx 15mm.
Keyhole escutcheon - flap is hinged at the top and opens up against a spring. 2 hole (21mm centres) fixing in base plate - chromium finish. Approx 29mm diameter.
Remanufactured part. Chrome on brass sand casting long strip for mounting on to bonnet top up to 1957 on Anglia, Escort and Thames 5cwt. Studs on base pass through holes in bonnet panel. Please...
Remanufactured part. Chrome on brass sand casting long strip for mounting on to bonnet top up to 1957 on Anglia, Escort and Thames 5cwt. Studs on base pass through holes in bonnet panel. Please...
Remanufactured part. Chrome on brass sand casting long strip for mounting on to bonnet top up to 1957 on Anglia, Escort and Thames 5cwt. Studs on base pass through holes in bonnet panel. Please...
New remanufacture to original pattern, chrome plated finish. Fitted 1957 onward.
remanufactured part. chrome on sand cast brass for mounting on to bonnet top up to 1957 on Prefect, Squire and Thames 7cwt. three studs on base pass through holes in bonnet panel.
Long chrome strip ornament which fits to early model side wing (fender) 1953 to 1957. Offered in PAIRS only comprising 1 piece 100E-16188 and 1 piece 100E-16189. Lost wax cast bronze finished in...
ESCORT chrome plate on brass casting. Nameplate for the front of car.
Ford Popular rear name badge for 103E and 104E. Deep chrome finish onto cast metal. Two threaded bosses to rear. Supplied with 2 studs, nuts and washers. Made in the UK
Ford Prefect rear name badge for models E93A and E493A. Deep chrome finish onto cast metal. Two threaded bosses to rear. Supplied with 2 studs, nuts and washers. Made in the UK
100E/107E Prefect rear boot badge script.
Chrome on Brass finish, with two stud fixing.
Overall lenght 188mm, fixing studs at 121mm centres.
Correct early type badge for 100E models. Although...
Chrome on Brass finish, with two stud fixing.
Overall lenght 188mm, fixing studs at 121mm centres.
Correct early type badge for 100E models. Although...
Enamel on chrome Prefect badge - fits into front bonnet trim 1949 to1953
Chrome plated bonnet side ornament plaques featuring the wording 'a Ford product made in England' plaque,.
135mm long x 30mm tall, with two fixing studs at 88mm centres.
Supplied as a matched...
135mm long x 30mm tall, with two fixing studs at 88mm centres.
Supplied as a matched...
Chrome plated bonnet side ornament plaques featuring the wording “FORD”.
135mm long x 30mm tall, with two fixing studs at 88mm centres.
Supplied as a matched pair (left and right side),
135mm long x 30mm tall, with two fixing studs at 88mm centres.
Supplied as a matched pair (left and right side),
oval chrome finish badge with mounting stud "Ford Popular" fit into bonnet ornament 8215
oval chrome finish and blue enamelled badge with mounting stud "Thames" fit into bonnet ornament 8215
oval chrome finish and red enamelled badge with mounting stud "Anglia" fit into bonnet ornament 8215
oval chrome finish and red enamelled badge with mounting stud "Ford Popular" fit into bonnet ornament 8215
Oval chrome finish and blue enamelled badge with mounting stud 'Ford' fit into bonnet ornament 8215 oval chrome finish and blue enamelled badge with mounting stud "Ford"
oval chrome finish and red enamelled badge with mounting stud 'Ford' fit into bonnet ornament 8215
oval chrome finish and blue enamelled badge with mounting stud "Fordson" fit into bonnet ornament 8215
spoon end for grill top, chrome, short rad Y fit badge 8213 in the oval
spoon end for grill top, chrome, long rad Y fit badge 8213 in the oval
Spoon end for grill top, chrome, long rad Y. *****Same chrome finish on bronze casting but with some surface imperfections in the casting and therefore the chrome finish***** Fit badge 8213 in the...
spoon end for grill top, chrome, model C and CX fit badge 8213 in the oval
Spoon end for grill top, chrome, 125mm long fit badge 8213 in the oval
Spoon end for grill top, chrome, 105mm long fit badge 8213 in the oval
Chrome plated radiator ornament with spoon end design, suitable for mounting on the top of the radiator grille.
Designed to accept oval badge 8213 in the centre.
Designed to accept oval badge 8213 in the centre.
chrome plate name plate with red ANGLIA infill badge for mounting on to radiator grill panel (under bonnet panel). although NOT original part it is a good remake. we offer the this with a moulded...
re-manufactured 5CWT chrome plate name plate for radiator grill panel (under bonnet panel) with Thames word plastic insert fitted. we offer the this with a moulded plastic rear engraved red...
Re-manufactured 7CWT chrome plate name plate for radiator grill panel (under bonnet panel) with Thames word plastic insert fitted. We offer the this with a moulded plastic rear engraved red...
Prefect 100E grille & boot handle badge, three sword black shield on a red background, 38mm (1-1/2") in diameter.
New plastic moulded badge, hand painted in our workshop.
Please note the red...
New plastic moulded badge, hand painted in our workshop.
Please note the red...
Prefect 100E horn push button centre badge, three sword black shield on a red background, 50mm (2") in diameter with three locating lugs.
New plastic moulded part, hand painted in our...
New plastic moulded part, hand painted in our...
Ford 105E horn push button centre badge, 5 star on a red background in a knurled silver ring, 53mm overaul diameter, with a 43.5mm diameter boss on the back.
New plastic moulded part, hand...
New plastic moulded part, hand...
Early coloured roundel badge for rear quarter panel with rear chrome mounting. 5 gold star on red with light grey outer written Product of Ford Motor Co Ltd. Used to September 1961
Coloured roundel badge with chrome base for rear quarter panel. 5 gold stars on red background with plain off white outer. Chrome base. Originally used September 1961 onwards.
chrome plate round badge with black backing for rear quarter panel
Ford triangle chrome wing badge with " FORD MOTOR COMPANY LTD. ENGLAND " engraved,
Blue Ford emblem on silver back (not White). used mid 1961 onward - fixed to nearside front wing. pins 50.5mm apart also used on: Ford Cortina, Escort & Consul
Blue Ford oval emblem on silver back. Dimensions 88mm long x 25mm tall, held with two 3mm pins with 50mm centres. Used approx 1966 onward and mounted to lower near side wing.
Grill ornament - new made enamel shield, with sword motif on a black background.
Grill ornament mount, rechromed. straight top edge. limited supply -
Vintage "Ford" Script Emblem. Chrome plated finish with triple plating process. Stud mount design with clips included.
Dimensions 84mm long x 38mm tall.
Dimensions 84mm long x 38mm tall.
Vintage "Ford" Script Emblem. Chrome plated finish with triple chrome plating process. Double sided tape fixing.
Dimensions 82mm long x 39mm tall.
Dimensions 82mm long x 39mm tall.
Chrome on brass folded centre bonnet strip, 845mm length (33.25") 21mm wide. Side panels are folded and slide in place. This part is offered in the longer length for the listed vehicles. The...
Chrome on brass folded centre bonnet strip, 21mm wide and sold in 1270mm (50") lengths. Side panels are folded and slide in place.
This product incurs the oversize shipping fee.
This product incurs the oversize shipping fee.
Folded steel side strip for sliding into bonnet strip, one piece 48"/1220mm long. Weld to flat panel. 25mm overall width (flange 14mm)
This product incurs the oversize shipping fee.
This product incurs the oversize shipping fee.
Chrome on brass fitting. Base 45mm x 16mm, mounting holes 32mm centres.
Chrome on brass fitting. Base approx 45mm x 16mm, 28mm deep overall. Mounting holes 31mm centres.
Chrome on brass fitting. Base 48mm x 19mm, mounting holes 32mm centres.
Chrome plate on brass fitting with 1/4" (approx 6mm) hole. Base 45mm x 15mm, mounting holes 31mm apart.
Chrome plate on brass fitting with 1/4" (approx 6mm) hole. base 45mm x 15mm, mounting holes 31mm apart.
Stainless steel ringed bonnet knob, 34mm diameter. With three engraved circles in face.
Bonnet/hood catch supplied with pocket. Polished stainless steel parts, 91mm tall overall, base 55mm wide. Choice of 2 hole mount (13mm deep) or 3 hole mount (30mm deep).
Bonnet/hood catch supplied with pocket. Polished stainless steel parts, 91mm tall overall, base 55mm wide. Choice of 2 hole mount (13mm deep) or 3 hole mount (30mm deep).
Bonnet/hood catch supplied with pocket. Polished stainless steel parts, 91mm tall overall, base 55mm wide. Choice of 2 hole mount (13mm deep) or 3 hole mount (30mm deep).
Stainless steel bonnet catch with T top/bar grip pattern. 95mm long, two screw base (mount holes 35mm centres) mounts horizontally.
Bonnet catch plate for mounting to bonnet panel. Base approx 72mm tall x 46mm at widest point. Lower hole centres are 31mm.
Accepts the B-16758 rubber buffer. Ford applications originally....
Accepts the B-16758 rubber buffer. Ford applications originally....
Bonnet rest strip with screw kit.
Double beaded 5/8" wide treated canvas bonnet tape with 10 screws.
Double beaded 5/8" wide treated canvas bonnet tape with 10 screws.
Prices shown include VAT @ 20% where applicable
