moulded rubber part, internal size approx 112mm x 70mm
Rubber and Sponge Parts
Help and Instructions
-
8-10hp Rubber & Trim List-1
-
8-10hp Rubber & Trim List-2
-
100E Rubber & Trim List
Parts
pair of black moulded rear lamp rubber - offered left and right wing part only
pair of angled black rubber moulded rear lamp mount pads - offered left and right part only
moulded part (black), seats lamp. per pair (left and right hand). approx 140mm x 105mm
headlamp bowl to body rubber gasket for all two screw adjuster 7" (700 type) lamps.
rubber rear body (boot) for Lucas 488 model lamp. Ford part ref E0A-13216
rear window glass rubber, supplied with chrome effect filler locking strip, for estate (station wagon) rear door. note that this part is supplied in a cut length off the roll.
front window windshield weatherstrip rubber (with flap lower corners) one piece moulded part.
rear window weatherstrip rubber, one piece moulded part.
for Prefect (4 door). per side of vehicle (2 pieces, 1 front door, 1 rear door)
moulded reproduction black synthetic rubber, pattern as original. RHD models, but will suit LHD 101E. weight approx. 6.5kg
black moulded extrusion for holding glass windscreen into body, with radius corners for fixed screen models
moulded rubber part. supplied per pair only.
please will users note that this part is used from mid 1955 onwards. these rubbers fit into the outer frame.
please will users note that this part is used from mid 1955 onwards. these rubbers fit into the outer frame.
moulded part weatherseal for front opening quarter window on door. supplied in pair only.
front side vent door opening quarterlight rubber. only for panel van. offerd in pair only (one piece each left and right of vehicle)
moulded reproduction black synthetic rubber, pattern as original. Weight approx. 8kg. this part is moulded from an original saloon rear mat which can be modified to suit estate application.
washer between rear mudguard and running board, also used on the exhaust silencer bracket. approx 25mm outside, 10mm inside x 5mm thick.
moulded end sponge door seal, glues to door. supplies in pairs only (1 each left and right). although moulded for front doors, will also fit to Prefect rear doors.
fits to front body pillar (A post), supplied with part E25-AD-1, in pairs only (1 each left and right)
black rubber windscreen filler/lock strip available separately for window weatherstrip. arrow head shape filler approx 10.4mm wide.
moulded rubber for front screen with black filler strip. deluxe type which uses the existing rigid chrome cover strips.
moulded rubber for rear screen with black filler strip. deluxe type which uses the existing rigid chrome cover strips.
black blanking grommets for approx 1.5mm panel thickness, packet size varies according to size, to suit panel hole of: 12mm (pack of 100 piece), 16mm (pack of 100 piece), 19mm (pack of 25 piece),...
black blanking grommets for approx 1.5mm panel thickness, packet size varies according to size, to suit panel hole of: 12mm (pack of 100 piece), 16mm (pack of 100 piece), 19mm (pack of 25 piece),...
black blanking grommets for approx 1.5mm panel thickness, packet size varies according to size, to suit panel hole of: 12mm (pack of 100 piece), 16mm (pack of 100 piece), 19mm (pack of 25 piece),...
black blanking grommets for approx 1.5mm panel thickness, packet size varies according to size, to suit panel hole of: 12mm (pack of 100 piece), 16mm (pack of 100 piece), 19mm (pack of 25 piece),...
black blanking grommets for approx 1.5mm panel thickness, packet size varies according to size, to suit panel hole of: 12mm (pack of 100 piece), 16mm (pack of 100 piece), 19mm (pack of 25 piece),...
black blanking grommets for approx 1.5mm panel thickness, packet size varies according to size, to suit panel hole of: 12mm (pack of 100 piece), 16mm (pack of 100 piece), 19mm (pack of 25 piece),...
black blanking grommets for approx 1.5mm panel thickness, packet size varies according to size, to suit panel hole of: 12mm (pack of 100 piece), 16mm (pack of 100 piece), 19mm (pack of 25 piece),...
black blanking grommets for approx 1.5mm panel thickness, packet size varies according to size, to suit panel hole of: 12mm (pack of 100 piece), 16mm (pack of 100 piece), 19mm (pack of 25 piece),...
mixed blanking grommet (no hole) pack - assortment of 100 pieces, ranging through 6.5mm panel hole to 25mm hole through 1.6mm thick metal panel - approx 100 pieces in all.
black rubber moulded part, fits 40mm hole in floor panel, 55mm overall
grommet (with hole) pack - assortment of 100 pieces, ranging through 6.5mm panel hole to 25mm hole through 1.6mm thick metal panel - approx 100 pieces in all.
black rubber grommet, fits A post inner quarter panel (cowl) through 19mm panel hole.
black grommets (with hole) for approx 1.5mm panel thickness, packet size varies according to size, to suit panel hole of: 6.5mm (pack of 100 piece), 8mm (pack of 100 piece), 9.5mm (pack of 100...
black grommets (with hole) for approx 1.5mm panel thickness, packet size varies according to size, to suit panel hole of: 6.5mm (pack of 100 piece), 8mm (pack of 100 piece), 9.5mm (pack of 100...
black grommets (with hole) for approx 1.5mm panel thickness, packet size varies according to size, to suit panel hole of: 6.5mm (pack of 100 piece), 8mm (pack of 100 piece), 9.5mm (pack of 100...
black grommets (with hole) for approx 1.5mm panel thickness, packet size varies according to size, to suit panel hole of: 6.5mm (pack of 100 piece), 8mm (pack of 100 piece), 9.5mm (pack of 100...
black grommets (with hole) for approx 1.5mm panel thickness, packet size varies according to size, to suit panel hole of: 6.5mm (pack of 100 piece), 8mm (pack of 100 piece), 9.5mm (pack of 100...
black grommets (with hole) for approx 1.5mm panel thickness, packet size varies according to size, to suit panel hole of: 6.5mm (pack of 100 piece), 8mm (pack of 100 piece), 9.5mm (pack of 100...
black grommets (with hole) for approx 1.5mm panel thickness, packet size varies according to size, to suit panel hole of: 6.5mm (pack of 100 piece), 8mm (pack of 100 piece), 9.5mm (pack of 100...
black grommets (with hole) for approx 1.5mm panel thickness, packet size varies according to size, to suit panel hole of: 6.5mm (pack of 100 piece), 8mm (pack of 100 piece), 9.5mm (pack of 100...
black grommets (with hole) for approx 1.5mm panel thickness, packet size varies according to size, to suit panel hole of: 6.5mm (pack of 100 piece), 8mm (pack of 100 piece), 9.5mm (pack of 100...
black grommets (with hole) for approx 1.5mm panel thickness, packet size varies according to size, to suit panel hole of: 6.5mm (pack of 100 piece), 8mm (pack of 100 piece), 9.5mm (pack of 100...
angled rubber grommet to fit through bulhead to surround throttle shaft
moulded grommet for rear side window on saloon. offered in black 105E-7030263-A or grey 105E-7030263-B
moulded grommet for rear side window on saloon. offered in black 105E-7030263-A or grey 105E-7030263-B
moulded grommet for rear side window on saloon. offered in black 105E-7030263-A or grey 105E-7030263-B
fits behind pressed type rear lamp assembly. part reference also shown as E85-NC-1
moulded black headlamp bezel to wing (fender) seal gasket
moulded white headlamp bezel to wing (fender) seal gasket
rubber buffer (black) for fitting behind bonnet catch plate Y-16750, dimensions: base 21mm x 18mm, top 21mm x 10mm.
as per illustration,approx size 32mm x 23mm x 16mm thick. insert lug 25mm x 14mm x 13mm
as per illustration, approx size
32mm x 23mm x 14mm thick
insert lug 22mm x 14mm x 10mm
32mm x 23mm x 14mm thick
insert lug 22mm x 14mm x 10mm
black rubber moulded part, internal diameter 64mm, panel hole approx 76mm, overall diameter 100mm.
moulded part, black.
62mm internal diameter, fits panel hole 70mm diameter, 102mm overall diameter.
62mm internal diameter, fits panel hole 70mm diameter, 102mm overall diameter.
black rubber moulded part, oval shape hole for 65mm pipe, panel hole 108mm x 85mm. overall 130mm x 100mm. all dimensions approx.
moulded rubber part, black. slot 36mm x 6mm. base overall 68mm x 60mm approx. supplied in handed pair. on this pattern the iron passes through the face rubber at an angle.
moulded rubber part, black. slot 37mm x 15mm. base overall 73mm x 62mm approx. supplied in handed pair. on this pattern the iron passes through the face rubber at an angle.
moulded rubber part, black. slot 38mm x 6mm. base overall 75mm x 64mm approx. supplied in handed pair. on this pattern the iron passes through the face rubber at right angle.
moulded rubber part, black. shaped slot 32mm x 8mm at widest. base overall 58mm x 34mm approx, fits into panel hole approx 43mm x 19mm. sold each.
note photo shows front and rear views for...
note photo shows front and rear views for...
moulded part, 8mm inner hole, 13mm outer neck, 22mm diameter.
super grip hose clip, galvanised wire type clip 1-11/16"(43mm) fully open, tightens to 1-1/2"(38mm) fitted as original equipment to most cars, only size stocked in this type of clip.
glazing tool kit comprising grip handle with a tool assortment for fitting filler strip to windscreen channel
black, as per illustration for 6mm glass. 12mm deep x 9mm wide, flange tail 12mm long approx
black, as per illustration.
approx 15mm x 15mm body , flange tail approx 21mm long.
approx 15mm x 15mm body , flange tail approx 21mm long.
black, as per illustration.
approx 15mm x 15mm body , flange tail approx 21mm long.
approx 15mm x 15mm body , flange tail approx 21mm long.
black, as per illustration.
approx 15mm x 15mm body , flange tail approx 21mm long.
rear windscreen rubber for anglia, prefect and popular with bakelite trim fitted 2.2mtr required
approx 15mm x 15mm body , flange tail approx 21mm long.
rear windscreen rubber for anglia, prefect and popular with bakelite trim fitted 2.2mtr required
black filler strip for roof seal, as per illustration. base 12mm, top width 20mm, overall height 10mm.
black, as per illustration. 10mm across base x 19mm overall, 6mm neck.
extruded sponge rectangular section, skinned on all four sides.
stock sizes:
3mm x 16mm
6mm x 12mm
12mm x 12mm
10mm x 19mm
6mm x 19mm
10mm x 16mm
13mm x...
stock sizes:
3mm x 16mm
6mm x 12mm
12mm x 12mm
10mm x 19mm
6mm x 19mm
10mm x 16mm
13mm x...
extruded sponge rectangular section, skinned on all four sides.
stock sizes:
3mm x 16mm
6mm x 12mm
12mm x 12mm
10mm x 19mm
6mm x 19mm
10mm x 16mm
13mm x...
stock sizes:
3mm x 16mm
6mm x 12mm
12mm x 12mm
10mm x 19mm
6mm x 19mm
10mm x 16mm
13mm x...
extruded sponge rectangular section, skinned on all four sides.
stock sizes:
3mm x 16mm
6mm x 12mm
12mm x 12mm
10mm x 19mm
6mm x 19mm
10mm x 16mm
13mm x...
stock sizes:
3mm x 16mm
6mm x 12mm
12mm x 12mm
10mm x 19mm
6mm x 19mm
10mm x 16mm
13mm x...
extruded sponge rectangular section, skinned on all four sides.
stock sizes:
3mm x 16mm
6mm x 12mm
12mm x 12mm
10mm x 19mm
6mm x 19mm
10mm x 16mm
13mm x...
stock sizes:
3mm x 16mm
6mm x 12mm
12mm x 12mm
10mm x 19mm
6mm x 19mm
10mm x 16mm
13mm x...
extruded sponge rectangular section, skinned on all four sides.
stock sizes:
3mm x 16mm
6mm x 12mm
12mm x 12mm
10mm x 19mm
6mm x 19mm
10mm x 16mm
13mm x...
stock sizes:
3mm x 16mm
6mm x 12mm
12mm x 12mm
10mm x 19mm
6mm x 19mm
10mm x 16mm
13mm x...
extruded sponge rectangular section, skinned on all four sides.
stock sizes:
3mm x 16mm
6mm x 12mm
12mm x 12mm
10mm x 19mm
6mm x 19mm
10mm x 16mm
13mm x...
stock sizes:
3mm x 16mm
6mm x 12mm
12mm x 12mm
10mm x 19mm
6mm x 19mm
10mm x 16mm
13mm x...
extruded sponge rectangular section, skinned on all four sides.
stock sizes:
3mm x 16mm
6mm x 12mm
12mm x 12mm
10mm x 19mm
6mm x 19mm
10mm x 16mm
13mm x...
stock sizes:
3mm x 16mm
6mm x 12mm
12mm x 12mm
10mm x 19mm
6mm x 19mm
10mm x 16mm
13mm x...
extruded sponge rectangular section, skinned on all four sides.
stock sizes:
3mm x 16mm
6mm x 12mm
12mm x 12mm
10mm x 19mm
6mm x 19mm
10mm x 16mm
13mm x...
stock sizes:
3mm x 16mm
6mm x 12mm
12mm x 12mm
10mm x 19mm
6mm x 19mm
10mm x 16mm
13mm x...
section as per illustration. choice of black section, base size approx 15mm x 15mm or grey section, base size 13mm x 13mm. soft extrusion.
section as per illustration, 11mm wide flat base x 12mm high. soft black skinned section.
black rubber gear lever gaiter. D shaped base 142mm tall x 110mm wide external (inside approx 69mm x 64mm). gear stick hole 14mm. height 100mm - ALL approx.
moulded rubber for front windscreen / screen , standard type. 3.0mtr long,
we offer this with either black (as original) locking filler strip, or as an alternative we can supply chrome locking...
we offer this with either black (as original) locking filler strip, or as an alternative we can supply chrome locking...
moulded rubber for rear windscreen / screen , standard type. 2.75mtr long
we offer this with either black (as original) locking filler strip, or as an alternative we can supply chrome locking...
we offer this with either black (as original) locking filler strip, or as an alternative we can supply chrome locking...
black rubber strip used for glazing into frames and mounting strip, available in sizes
38mm x 1.0mm
38mm x 1.5mm
50mm x 1.5mm
50mm x 3.0mm
75mm x 1.5mm...
38mm x 1.0mm
38mm x 1.5mm
50mm x 1.5mm
50mm x 3.0mm
75mm x 1.5mm...
black rubber strip used for glazing into frames and mounting strip, available in sizes
38mm x 1.0mm
38mm x 1.5mm
50mm x 1.5mm
50mm x 3.0mm
75mm x 1.5mm...
38mm x 1.0mm
38mm x 1.5mm
50mm x 1.5mm
50mm x 3.0mm
75mm x 1.5mm...
black rubber strip used for glazing into frames and mounting strip, available in sizes
38mm x 1.0mm
38mm x 1.5mm
50mm x 1.5mm
50mm x 3.0mm
75mm x 1.5mm...
38mm x 1.0mm
38mm x 1.5mm
50mm x 1.5mm
50mm x 3.0mm
75mm x 1.5mm...
black rubber strip used for glazing into frames and mounting strip, available in sizes
38mm x 1.0mm
38mm x 1.5mm
50mm x 1.5mm
50mm x 3.0mm
75mm x 1.5mm...
38mm x 1.0mm
38mm x 1.5mm
50mm x 1.5mm
50mm x 3.0mm
75mm x 1.5mm...
black rubber strip used for glazing into frames and mounting strip, available in sizes
38mm x 1.0mm
38mm x 1.5mm
50mm x 1.5mm
50mm x 3.0mm
75mm x 1.5mm...
38mm x 1.0mm
38mm x 1.5mm
50mm x 1.5mm
50mm x 3.0mm
75mm x 1.5mm...
black rubber strip used for glazing into frames and mounting strip, available in sizes
38mm x 1.0mm
38mm x 1.5mm
50mm x 1.5mm
50mm x 3.0mm
75mm x 1.5mm...
38mm x 1.0mm
38mm x 1.5mm
50mm x 1.5mm
50mm x 3.0mm
75mm x 1.5mm...
black rubber strip used for glazing into frames and mounting strip, available in sizes
38mm x 1.0mm
38mm x 1.5mm
50mm x 1.5mm
50mm x 3.0mm
75mm x 1.5mm...
38mm x 1.0mm
38mm x 1.5mm
50mm x 1.5mm
50mm x 3.0mm
75mm x 1.5mm...
rear lamp bulb holder rubber cover, fits onto the rear of stop/tail and indicator lamp bulb holder, hole in the side to allow wiring through.
black, as per illustration. 23mm wide, glass 4.75mm to 6mm and panel 3.1mm to 3.5mm. (clearance between glass and panel 8mm). minimum bend radius 102mm.. this section is supplied with a similar...
black, as per illustration. 23mm wide, glass 4.75mm to 6mm and panel 3.1mm to 3.5mm. (clearance between glass and panel 8mm). minimum bend radius 102mm.. this section is supplied with a similar...
black, as per illustration. 23mm wide, glass 4.75mm to 6mm and panel 3.1mm to 3.5mm. (clearance between glass and panel 8mm). minimum bend radius 102mm.. this section is supplied with a similar...
steering column opening cover floor gasket, 167mm long x 69mm wide with 22mm hole.
saloon rear indicator lens gasket, lens to lamp body.
saloon stop/side lamp lens gasket, lens to lamp body.
wing/grille side light lens gasket, lens to lamp.
upper door sponge seal - which you glue to the door surround - for ONE door
note that the original sponge door seal surround was a one piece item, the cross section differs from the top to the...
note that the original sponge door seal surround was a one piece item, the cross section differs from the top to the...
lower door sponge seal - which you glue to the door surround - for ONE door
note that the original sponge door seal surround was a one piece item, the cross section differs from the top to the...
note that the original sponge door seal surround was a one piece item, the cross section differs from the top to the...
black rubber extrusion - fixes below windscreen position under bonnet
Prices shown include VAT @ 20% where applicable