'Chrome' finish plastic windscreen filler/locking strip, available separately for our RM47 screen rubber and 105E-7942084 105E estate rear tailgate screen rubber.
Dimensions :- 11mm wide x...
Dimensions :- 11mm wide x...
Rubber and Sponge Parts
Help and Instructions
-
8-10hp Rubber & Trim List-1
-
8-10hp Rubber & Trim List-2
-
100E Rubber & Trim List
-
105E Rubber & Trim List
Parts
Quality replacement bonnet corner rest pads, correct for a range of classic Ford 100E models from 1953 to 1962.
These pads fit to the rear corners of the bonnet and provide proper support when...
These pads fit to the rear corners of the bonnet and provide proper support when...
Correct replacement front door weatherstrip seals for the A-pillar / front edge of the door aperture, supplied as a pair for both left- and right-hand sides.
These are partial seals, designed to...
These are partial seals, designed to...
Moulded rubber for front windscreen / screen, standard type. 3.0mtr long, we offer this with either black (as original) locking filler strip, or as an alternative we can supply chrome locking strip.
High-quality moulded front rubber floor mat, reproduced to the original factory pattern, suitable for a classic Ford 100E models from 1953 to 1962.
Manufactured from black synthetic rubber, these...
Manufactured from black synthetic rubber, these...
High-quality moulded rear rubber floor mat, reproduced to the original factory saloon pattern, suitable for a range of classic Ford 100E models.
Manufactured from black synthetic rubber, this...
Manufactured from black synthetic rubber, this...
Quality replacement top door weatherstrip seals, supplied as a pair for both left-hand and right-hand doors.
These seals fit by glueing around the upper section of the door (top/upper frame area)...
These seals fit by glueing around the upper section of the door (top/upper frame area)...
Moulded rubber for rear windscreen / screen, standard type. 2.75mtr long we offer this with either black (as original) locking filler strip, or as an alternative we can supply chrome locking strip.
High-quality moulded rubber front windscreen seal, Deluxe type, suitable for a range of classic Ford 100E and 300E vans from 1953 to 1962.
This is the Deluxe specification seal, designed to be...
This is the Deluxe specification seal, designed to be...
Quality replacement quarterlight rubber weatherseals, moulded to the correct shape for the front opening quarterlight window fitted in the door.
These rubbers help seal the quarter window against...
These rubbers help seal the quarter window against...
High-quality moulded rubber rear windscreen seal, Deluxe type, suitable for a range of classic Ford 100E saloons from 1953 to 1962.
This is the Deluxe specification seal, designed to be used with...
This is the Deluxe specification seal, designed to be used with...
Quality replacement angled rubber grommet for the throttle shaft bulkhead opening.
Fits a 10mm panel hole and features a 7.8mm centre hole. Approximate dimensions are 25mm overall length x 15.5mm...
Fits a 10mm panel hole and features a 7.8mm centre hole. Approximate dimensions are 25mm overall length x 15.5mm...
Rear lamp rubber base gaskets, offered as a pair only R/H & L/H.
Handed black rubber base with raised edge and moulded bulb holder sleeve.
Dimensions - 155mm x 70mm with two fixing holes at...
Handed black rubber base with raised edge and moulded bulb holder sleeve.
Dimensions - 155mm x 70mm with two fixing holes at...
Quality replacement rear screen rubber seal, correct type for vehicles without the bakelite trim fitted inside.
Manufactured from durable rubber with the correct profile, this seal is designed to...
Manufactured from durable rubber with the correct profile, this seal is designed to...
wing/grill side light lens gasket, lens to lamp.
Grey rubber speedo cable grommet for where the speedo cable passes through the body, please note that this grommet needs to be split to get it over the cable, dimensions 30mm diameter x 11mm...
Inner wing wiring grommet, for headlamp and wing lamp wires where they pass through the inner wing, grey rubber oval tube grommet, hole through the centre is 14mm x 9mm, overall length 38mm, fits...
Bulkhead wiring loom grommet, for main wiring harness where it passes through the body, grey rubber tapered grommet with an 11mm hole through the centre, fits a 22mm panel hole, overall diameter 33mm.
Bonnet buffer rubber, 'L' shaped black rubber bonnet stop, fits into the upper inner wing, onto which the bonnet rests, dimensions, footprint 26mm x 24mm, height 19mm and fits a 10mm panel hole.
Quality replacement black moulded rubber bumper iron grommet, sold each.
Features a shaped slot approximately 32mm x 8mm at the widest point, an approximate 58mm x 34mm overall base, and fits a...
Features a shaped slot approximately 32mm x 8mm at the widest point, an approximate 58mm x 34mm overall base, and fits a...
Steering column opening cover floor gasket, 167mm long x 69mm wide with 22mm hole.
Quality replacement quarterlight rubber weatherseals, moulded to the correct shape for the front opening quarterlight window fitted in the door.
These rubbers help seal the quarter window against...
These rubbers help seal the quarter window against...
Quality replacement moulded rubber hinge grommet for the rear side window assembly on Ford 105E saloon models.
36mm long x 14.5mm wide with a 25mm x 4mm slot for the frame hinge, 17mm deep taping...
36mm long x 14.5mm wide with a 25mm x 4mm slot for the frame hinge, 17mm deep taping...
Quality replacement moulded rubber hinge grommet for the rear side window assembly on Ford 105E saloon models.
36mm long x 14.5mm wide with a 25mm x 4mm slot for the frame hinge, 17mm deep taping...
36mm long x 14.5mm wide with a 25mm x 4mm slot for the frame hinge, 17mm deep taping...
Quality replacement moulded rubber hinge grommet for the rear side window assembly on Ford 105E saloon models.
36mm long x 14.5mm wide with a 25mm x 4mm slot for the frame hinge, 17mm deep taping...
36mm long x 14.5mm wide with a 25mm x 4mm slot for the frame hinge, 17mm deep taping...
Rear screen window weatherstrip rubber.
One piece moulded part.
One piece moulded part.
Rear window glass rubber (glazing rubber), supplied with chrome effect filler locking strip, for estate (station wagon) rear door.
Note that this part is supplied in a cut length off the roll....
Note that this part is supplied in a cut length off the roll....
Fuel tank filler pipe to tank boot floor rubber grommet. Saloon only. overall dimensions 105mm x 92mm,
saloon stop/side lamp lens gasket, lens to lamp body.
Rubber rear body (boot) for Lucas L488 model type lamps. Our 298 lamps.
Ford part reference E0A-13216.
Ford part reference E0A-13216.
Quality replacement quarterlight rubber weatherseals, Only for panel van, moulded to the correct shape for the front opening quarterlight window fitted in the door.
These rubbers help seal the...
These rubbers help seal the...
Glazing tool kit for fitting rubber glazing sections and filler strips during window installation.
Useful when installing classic car windscreen, side window and rear window rubbers, helping to...
Useful when installing classic car windscreen, side window and rear window rubbers, helping to...
Black rubber strip used for glazing applications, fitting into frames and mounting strips. Available in sizes:
38mm x 1.0mm
38mm x 1.5mm
50mm x 1.5mm
50mm x 3.0mm
75mm x 1.5mm
75mm x 3.0mm...
38mm x 1.0mm
38mm x 1.5mm
50mm x 1.5mm
50mm x 3.0mm
75mm x 1.5mm
75mm x 3.0mm...
Black rubber strip used for glazing applications, fitting into frames and mounting strips. Available in sizes:
38mm x 1.0mm
38mm x 1.5mm
50mm x 1.5mm
50mm x 3.0mm
75mm x 1.5mm
75mm x 3.0mm...
38mm x 1.0mm
38mm x 1.5mm
50mm x 1.5mm
50mm x 3.0mm
75mm x 1.5mm
75mm x 3.0mm...
Black rubber strip used for glazing applications, fitting into frames and mounting strips. Available in sizes:
38mm x 1.0mm
38mm x 1.5mm
50mm x 1.5mm
50mm x 3.0mm
75mm x 1.5mm
75mm x 3.0mm...
38mm x 1.0mm
38mm x 1.5mm
50mm x 1.5mm
50mm x 3.0mm
75mm x 1.5mm
75mm x 3.0mm...
Black rubber strip used for glazing applications, fitting into frames and mounting strips. Available in sizes:
38mm x 1.0mm
38mm x 1.5mm
50mm x 1.5mm
50mm x 3.0mm
75mm x 1.5mm
75mm x 3.0mm...
38mm x 1.0mm
38mm x 1.5mm
50mm x 1.5mm
50mm x 3.0mm
75mm x 1.5mm
75mm x 3.0mm...
Black rubber strip used for glazing applications, fitting into frames and mounting strips. Available in sizes:
38mm x 1.0mm
38mm x 1.5mm
50mm x 1.5mm
50mm x 3.0mm
75mm x 1.5mm
75mm x 3.0mm...
38mm x 1.0mm
38mm x 1.5mm
50mm x 1.5mm
50mm x 3.0mm
75mm x 1.5mm
75mm x 3.0mm...
Black rubber strip used for glazing applications, fitting into frames and mounting strips. Available in sizes:
38mm x 1.0mm
38mm x 1.5mm
50mm x 1.5mm
50mm x 3.0mm
75mm x 1.5mm
75mm x 3.0mm...
38mm x 1.0mm
38mm x 1.5mm
50mm x 1.5mm
50mm x 3.0mm
75mm x 1.5mm
75mm x 3.0mm...
Black rubber strip used for glazing applications, fitting into frames and mounting strips. Available in sizes:
38mm x 1.0mm
38mm x 1.5mm
50mm x 1.5mm
50mm x 3.0mm
75mm x 1.5mm
75mm x 3.0mm...
38mm x 1.0mm
38mm x 1.5mm
50mm x 1.5mm
50mm x 3.0mm
75mm x 1.5mm
75mm x 3.0mm...
538.16 - Ford 8/10hp Windscreen wiper spindle grommet - Angled, 8mm spindle hole, 22mm diameter base
Quality replacement angled windscreen wiper spindle grommet, moulded in black rubber.
Features an 8mm inner hole, 13mm outer neck, and 22mm base diameter. Ford part number 7W-17515.
Designed to...
Features an 8mm inner hole, 13mm outer neck, and 22mm base diameter. Ford part number 7W-17515.
Designed to...
Black moulded rubber buffer and stop measuring approximately 25mm diameter x 13mm high, with a 3mm fixing hole.
Used as a cushioning stop to prevent panel, door or body component damage caused by...
Used as a cushioning stop to prevent panel, door or body component damage caused by...
Moulded rubber buffer and stop featuring a 22mm diameter x 5mm high cushioning surface with integral retaining tab for installation into a 12mm panel hole.
Designed to absorb impact, reduce...
Designed to absorb impact, reduce...
24mm diameter x 13mm high buffer top, with locating tab on base for fitting in to a 12mm panel fixing hole.
Quality replacement moulded rubber door buffer designed to cushion door closure and prevent metal-to-metal contact.
Approximate overall dimensions 32mm x 23mm x 16mm thick, with locating lug...
Approximate overall dimensions 32mm x 23mm x 16mm thick, with locating lug...
Replacement moulded rubber door buffer designed to cushion door closure and prevent metal-to-metal contact.
Approximate dimensions 32mm x 23mm x 14mm thick, with locating lug approximately 22mm x...
Approximate dimensions 32mm x 23mm x 14mm thick, with locating lug approximately 22mm x...
Headlamp bowl to body rubber gasket for all two screw adjuster 7" (700 type) lamps.
Equivalent to Lucas part number 54521487.
Equivalent to Lucas part number 54521487.
Gemelli double wire hose clip for hose diameters from 22mm to 53mm. Made from zinc plated steel and alloy coated 2.4mm wire.
This original-equipment style clip provides strong, even clamping...
This original-equipment style clip provides strong, even clamping...
Gemelli double wire hose clip for hose diameters from 22mm to 53mm. Made from zinc plated steel and alloy coated 2.4mm wire.
This original-equipment style clip provides strong, even clamping...
This original-equipment style clip provides strong, even clamping...
GWC29 - Gemelli Wire Hose Clip - For 22 to 53mm diameter - Gemelli Wire Hose Clip - range 25 to 29mm
Gemelli double wire hose clip for hose diameters from 22mm to 53mm. Made from zinc plated steel and alloy coated 2.4mm wire.
This original-equipment style clip provides strong, even clamping...
This original-equipment style clip provides strong, even clamping...
Gemelli double wire hose clip for hose diameters from 22mm to 53mm. Made from zinc plated steel and alloy coated 2.4mm wire.
This original-equipment style clip provides strong, even clamping...
This original-equipment style clip provides strong, even clamping...
GWC35 - Gemelli Wire Hose Clip - For 22 to 53mm diameter - Gemelli Wire Hose Clip - range 31 to 35mm
Gemelli double wire hose clip for hose diameters from 22mm to 53mm. Made from zinc plated steel and alloy coated 2.4mm wire.
This original-equipment style clip provides strong, even clamping...
This original-equipment style clip provides strong, even clamping...
GWC40 - Gemelli Wire Hose Clip - For 22 to 53mm diameter - Gemelli Wire Hose Clip - range 35 to 40mm
Gemelli double wire hose clip for hose diameters from 22mm to 53mm. Made from zinc plated steel and alloy coated 2.4mm wire.
This original-equipment style clip provides strong, even clamping...
This original-equipment style clip provides strong, even clamping...
GWC43 - Gemelli Wire Hose Clip - For 22 to 53mm diameter - Gemelli Wire Hose Clip - range 38 to 43mm
Gemelli double wire hose clip for hose diameters from 22mm to 53mm. Made from zinc plated steel and alloy coated 2.4mm wire.
This original-equipment style clip provides strong, even clamping...
This original-equipment style clip provides strong, even clamping...
GWC48 - Gemelli Wire Hose Clip - For 22 to 53mm diameter - Gemelli Wire Hose Clip - range 43 to 48mm
Gemelli double wire hose clip for hose diameters from 22mm to 53mm. Made from zinc plated steel and alloy coated 2.4mm wire.
This original-equipment style clip provides strong, even clamping...
This original-equipment style clip provides strong, even clamping...
GWC53 - Gemelli Wire Hose Clip - For 22 to 53mm diameter - Gemelli Wire Hose Clip - range 47 to 53mm
Gemelli double wire hose clip for hose diameters from 22mm to 53mm. Made from zinc plated steel and alloy coated 2.4mm wire.
This original-equipment style clip provides strong, even clamping...
This original-equipment style clip provides strong, even clamping...
Black rubber grommets with centre hole, manufactured for approximately 1.5mm panel thickness.
Designed to protect wiring, cables, pipes and control rods where they pass through body panels,...
Designed to protect wiring, cables, pipes and control rods where they pass through body panels,...
Black rubber grommets with centre hole, manufactured for approximately 1.5mm panel thickness.
Designed to protect wiring, cables, pipes and control rods where they pass through body panels,...
Designed to protect wiring, cables, pipes and control rods where they pass through body panels,...
Black rubber grommets with centre hole, manufactured for approximately 1.5mm panel thickness.
Designed to protect wiring, cables, pipes and control rods where they pass through body panels,...
Designed to protect wiring, cables, pipes and control rods where they pass through body panels,...
Black rubber grommets with centre hole, manufactured for approximately 1.5mm panel thickness.
Designed to protect wiring, cables, pipes and control rods where they pass through body panels,...
Designed to protect wiring, cables, pipes and control rods where they pass through body panels,...
Black rubber grommets with centre hole, manufactured for approximately 1.5mm panel thickness.
Designed to protect wiring, cables, pipes and control rods where they pass through body panels,...
Designed to protect wiring, cables, pipes and control rods where they pass through body panels,...
Black rubber grommets with centre hole, manufactured for approximately 1.5mm panel thickness.
Designed to protect wiring, cables, pipes and control rods where they pass through body panels,...
Designed to protect wiring, cables, pipes and control rods where they pass through body panels,...
Black rubber grommets with centre hole, manufactured for approximately 1.5mm panel thickness.
Designed to protect wiring, cables, pipes and control rods where they pass through body panels,...
Designed to protect wiring, cables, pipes and control rods where they pass through body panels,...
Black rubber grommets with centre hole, manufactured for approximately 1.5mm panel thickness.
Designed to protect wiring, cables, pipes and control rods where they pass through body panels,...
Designed to protect wiring, cables, pipes and control rods where they pass through body panels,...
Black rubber grommets with centre hole, manufactured for approximately 1.5mm panel thickness.
Designed to protect wiring, cables, pipes and control rods where they pass through body panels,...
Designed to protect wiring, cables, pipes and control rods where they pass through body panels,...
Assortment pack of black rubber grommets with centre hole, containing 90 pieces in a range of sizes.
Suitable for panel holes from approximately 6.5mm to 25mm diameter and metal panel thicknesses...
Suitable for panel holes from approximately 6.5mm to 25mm diameter and metal panel thicknesses...
Black rubber blanking grommets for approximately 1.5mm panel thickness. Packet size varies according to grommet size.
Designed to protect wiring, cables, pipes and control rods where they pass...
Designed to protect wiring, cables, pipes and control rods where they pass...
Black rubber blanking grommets for approximately 1.5mm panel thickness. Packet size varies according to grommet size.
Designed to protect wiring, cables, pipes and control rods where they pass...
Designed to protect wiring, cables, pipes and control rods where they pass...
Black rubber blanking grommets for approximately 1.5mm panel thickness. Packet size varies according to grommet size.
Designed to protect wiring, cables, pipes and control rods where they pass...
Designed to protect wiring, cables, pipes and control rods where they pass...
Black rubber blanking grommets for approximately 1.5mm panel thickness. Packet size varies according to grommet size.
Designed to protect wiring, cables, pipes and control rods where they pass...
Designed to protect wiring, cables, pipes and control rods where they pass...
Black rubber blanking grommets for approximately 1.5mm panel thickness. Packet size varies according to grommet size.
Designed to protect wiring, cables, pipes and control rods where they pass...
Designed to protect wiring, cables, pipes and control rods where they pass...
Black rubber blanking grommets for approximately 1.5mm panel thickness. Packet size varies according to grommet size.
Designed to protect wiring, cables, pipes and control rods where they pass...
Designed to protect wiring, cables, pipes and control rods where they pass...
Black rubber blanking grommets for approximately 1.5mm panel thickness. Packet size varies according to grommet size.
Designed to protect wiring, cables, pipes and control rods where they pass...
Designed to protect wiring, cables, pipes and control rods where they pass...
Assortment pack of black rubber plain blanking grommets (no hole), containing 90 pieces in a range of sizes.
Suitable for panel holes from approximately 6.5mm to 25mm diameter and metal panel...
Suitable for panel holes from approximately 6.5mm to 25mm diameter and metal panel...
Rear lamp moulded rubber base mounting pads, offered as a pair only R/H & L/H.
Handed black rubber moulded pads with raised edge, angled for curved wings.
Dimensions - 148mm x 62mm, inner...
Handed black rubber moulded pads with raised edge, angled for curved wings.
Dimensions - 148mm x 62mm, inner...
Quality replacement floor panel grommet, moulded in black rubber.
Fits a 40mm floor panel hole and measures approximately 55mm overall diameter.
Designed to seal unused openings in the floor...
Fits a 40mm floor panel hole and measures approximately 55mm overall diameter.
Designed to seal unused openings in the floor...
Quality replacement bonnet corner rest pads, correct for all four corners of the uprights and front corners only of the E83W 10cwt.
Black moulded part with metal interbonded plate.
These pads...
Black moulded part with metal interbonded plate.
These pads...
Quality replacement black moulded rubber bumper iron covers, supplied as a handed pair.
Each cover has a 37mm x 15mm slot and an approximate 73mm x 62mm overall base.
On this pattern, the bumper...
Each cover has a 37mm x 15mm slot and an approximate 73mm x 62mm overall base.
On this pattern, the bumper...
Quality replacement rubber washers, used as a cushioning/packing washer between panels and brackets to help reduce vibration, prevent rattles and protect paintwork.
As well as being correct for...
As well as being correct for...
Black moulded rubber fuel filler pipe grommet designed to seal and support the fuel filler neck where it passes through the body panel.
Approximate dimensions are 65mm internal diameter, 74mm...
Approximate dimensions are 65mm internal diameter, 74mm...
Moulded rubber section, fits onto the top of the sill panel acting as a seal against the door.
For Anglia & Popular 2 door models sold per side in 1000mm piece.
For Anglia & Popular 2 door models sold per side in 1000mm piece.
Quality replacement front windscreen rubber seal, manufactured as a black moulded extrusion for securing the windscreen glass into the body aperture.
This seal is the correct type for fixed...
This seal is the correct type for fixed...
Quality replacement black moulded rubber bumper iron covers, supplied as a handed pair.
Each cover has a 36mm x 6mm slot and an approximate 68mm x 60mm overall base. On this pattern, the bumper...
Each cover has a 36mm x 6mm slot and an approximate 68mm x 60mm overall base. On this pattern, the bumper...
Quality replacement black moulded rubber fuel filler pipe grommet.
Approximate dimensions are 62mm internal diameter, fitting a 73mm body panel hole, with 102mm overall diameter.
Provides...
Approximate dimensions are 62mm internal diameter, fitting a 73mm body panel hole, with 102mm overall diameter.
Provides...
Closed cell sponge with self adhesive backing strip. Will only absorb moisture into the cut hollow cell. Stock sizes are:
3mm x 8mm
3mm x 13mm
3mm x 25mm
6mm x 25mm
6mm x 38mm
10mm x 25mm...
3mm x 8mm
3mm x 13mm
3mm x 25mm
6mm x 25mm
6mm x 38mm
10mm x 25mm...
Black moulded rubber buffer designed to fit behind bonnet catch plate Y-16750.
Helps cushion the bonnet catch mechanism, reducing vibration, rattles and wear.
Dimensions approximately 21mm x...
Helps cushion the bonnet catch mechanism, reducing vibration, rattles and wear.
Dimensions approximately 21mm x...
Black moulded rubber fuel filler pipe grommet with one flattened side to suit the original body aperture.
Approximate dimensions are 65mm internal diameter, fitting a 76mm panel hole, with 98mm...
Approximate dimensions are 65mm internal diameter, fitting a 76mm panel hole, with 98mm...
Black rubber gear lever gaiter. D shaped base - 142mm tall x 110mm wide external dimensions (internal dimensions approximately 69mm x 64mm). Gear stick/lever hole 14mm diameter. Height 100mm. All...
Black moulded oval fuel filler pipe grommet designed for body apertures requiring an oval sealing profile.
Suitable for a 65mm filler pipe, fitting a panel opening approximately 108mm x 85mm,...
Suitable for a 65mm filler pipe, fitting a panel opening approximately 108mm x 85mm,...
Moulded rubber section, fits onto the top of the sill panel acting as a seal against the door.
For 5cwt van sold per side in 750mm piece.
For 5cwt van sold per side in 750mm piece.
Quality replacement black rubber grommet for the A-post inner quarter panel (cowl).
Fits a 19mm panel hole and provides a neat, weather-resistant seal while protecting cables and components...
Fits a 19mm panel hole and provides a neat, weather-resistant seal while protecting cables and components...
Black rubber extrusion - fixes below windscreen position under bonnet
saloon rear indicator lens gasket, lens to lamp body.
Quality replacement black rubber gasket for the cast-type rear lamp assembly with oblong reflector.
Fits between the lamp housing and body panel, helping to prevent water ingress, reduce...
Fits between the lamp housing and body panel, helping to prevent water ingress, reduce...
Quality replacement white rubber gasket for the cast-type rear lamp assembly with oblong reflector.
Fits between the lamp housing and body panel, helping to prevent water ingress, reduce...
Fits between the lamp housing and body panel, helping to prevent water ingress, reduce...
lower door sponge seal - which you glue to the door surround - for ONE door note that the original sponge door seal surround was a one piece item, the cross section differs from the top to the...
upper door sponge seal - which you glue to the door surround - for ONE door note that the original sponge door seal surround was a one piece item, the cross section differs from the top to the...
Quality replacement black rubber gasket for the pressed-type rear lamp assembly with the round reflector.
Fits between the lamp body and vehicle panel, providing a weather-resistant seal while...
Fits between the lamp body and vehicle panel, providing a weather-resistant seal while...
Quality replacement white rubber gasket for the pressed-type rear lamp assembly with the round reflector.
Fits between the lamp body and vehicle panel, providing a weather-resistant seal while...
Fits between the lamp body and vehicle panel, providing a weather-resistant seal while...
black rubber accelerator shaft grommet for where the accelerator shaft goes through the body, dimensions 40mm x 19mm with an angled 9mm hole through the centre. fit into a 32mm x 15mm panel hole.
Quality replacement rubber bonnet lock cover designed to protect the bonnet locking mechanism from dirt, moisture and road contamination.
67mm x 85mm flange with two holes at 40mm centres, angled...
67mm x 85mm flange with two holes at 40mm centres, angled...
Black rubber choke cable grommet for where the cable passes through the body, dimensions 19mm diameter, 17mm deep with a angled 5mm hole, fits 13mm panel hole.
Quality replacement black rubber sidelight boot designed to protect the rear of the sidelight unit and electrical connections from dirt and moisture.
Approximate dimensions are 33mm internal...
Approximate dimensions are 33mm internal...
Quality replacement black moulded rubber headlamp bezel to wing (fender) sealing gasket.
Fits between the headlamp rim assembly and the wing, providing a weather-resistant seal while helping to...
Fits between the headlamp rim assembly and the wing, providing a weather-resistant seal while helping to...
Quality replacement black rubber gear lever gaiter with circular scalloped base.
Measures approximately 120mm overall diameter and fits an approximately 110mm diameter metal panel hole up to 2mm...
Measures approximately 120mm overall diameter and fits an approximately 110mm diameter metal panel hole up to 2mm...
Quality replacement white moulded rubber headlamp bezel to wing (fender) sealing gasket.
Fits between the headlamp rim assembly and the wing, providing a weather-resistant seal while helping to...
Fits between the headlamp rim assembly and the wing, providing a weather-resistant seal while helping to...
Quality replacement black moulded rubber bumper iron covers, supplied as a handed pair.
Each cover has a 38mm x 6mm slot and an approximate 75mm x 64mm overall base.
On this pattern, the bumper...
Each cover has a 38mm x 6mm slot and an approximate 75mm x 64mm overall base.
On this pattern, the bumper...
rear lamp bulb holder rubber cover, fits onto the rear of stop/tail and indicator lamp bulb holder, hole in the side to allow wiring through.
Heater unit or fresh air duct seal to bonnet, dimensions 485mm long x 112mm wide x 25mm tall.
Off white stepped rubber gasket for the E83W-13550-B number plate lamp lens.
Fitted internally over the bulb holder, the lamps lens seats on the washer forming a seal.
Dimensions - 32mm o/d x...
Fitted internally over the bulb holder, the lamps lens seats on the washer forming a seal.
Dimensions - 32mm o/d x...
Quality replacement bonnet corner rest pads, correct for the rear corners of the E83W 10cwt.
Black moulded part with metal interbonded plate.
These pads fit to the corners of the bonnet and...
Black moulded part with metal interbonded plate.
These pads fit to the corners of the bonnet and...
Quality replacement black rubber gear lever gaiter with circular base.
Measures approximately 93mm overall diameter and fits over an approximately 80mm metal panel hole, with maximum panel...
Measures approximately 93mm overall diameter and fits over an approximately 80mm metal panel hole, with maximum panel...
black rubber boot lid handle circular gasket with raised edge, 33mm diameter , 16mm centre hole with a 26mm x 6mm slot.
Moulded rubber section, fits onto the top of the sill panel acting as a seal against the door.
For Prefect 4 door models sold per side in 2 pieces, 1 front door @ 750mm, 1 rear door @ 500mm
For Prefect 4 door models sold per side in 2 pieces, 1 front door @ 750mm, 1 rear door @ 500mm
Windscreen rubber surround locking filler strip, fits into the screen rubber front groove locking glass in place.
Arrow head shaped black rubber available separately for windscreen rubber...
Arrow head shaped black rubber available separately for windscreen rubber...
Black rubber extrusion, as per illustration. 10mm across base x 19mm overall, 6mm neck.
Black rubber U profile glazing extrusion for 6mm thick glass. Section measures approximately 11mm wide x 12mm deep, with one flange tail approximately 12mm long.
Supplied as rubber extrusion to...
Supplied as rubber extrusion to...
Black rubber filler strip profile for roof seal, as per illustration. Base 12mm, top width 20mm, overall height 10mm.
Black rubber glazing strip extrusion, approximately 15mm x 15mm body section, with a flange tail approximately 21mm long. Suitable for 4.5mm or 6mm glass, depending on installation.
Designed to...
Designed to...
Black rubber glazing strip extrusion, approximately 15mm x 15mm body section, with a flange tail approximately 21mm long. Suitable for 4.5mm or 6mm glass, depending on installation.
Designed to...
Designed to...
Black rubber glazing strip extrusion, approximately 15mm x 15mm body section, with a flange tail approximately 21mm long. Suitable for 4.5mm or 6mm glass, depending on installation.
Designed to...
Designed to...
Black window frame rubber extrusion, as per illustration. 7.5mm base, 25mm overall, 3.5mm neck.
Black rubber extrusion, as per illustration. Base 8mm, 24mm overall, neck 4mm.
Black, as per illustration. 21mm wide, glass 4.75mm and panel 0.8mm to 1.6mm. Clearance between glass and panel 7mm. Minimum bend radius 58mm. This section is supplied with a similar amount of...
Black, as per illustration. 21mm wide, glass 4.75mm and panel 0.8mm to 1.6mm. Clearance between glass and panel 7mm. Minimum bend radius 58mm. This section is supplied with a similar amount of...
Black, as per illustration. 21mm wide, glass 4.75mm and panel 0.8mm to 1.6mm. Clearance between glass and panel 7mm. Minimum bend radius 58mm. This section is supplied with a similar amount of...
Black, as per illustration. 23mm wide, glass 4.75mm to 6mm and panel 3.1mm to 3.5mm. Clearance between glass and panel 8mm. Minimum bend radius 102mm. This section is supplied with a similar...
Black, as per illustration. 23mm wide, glass 4.75mm to 6mm and panel 3.1mm to 3.5mm. Clearance between glass and panel 8mm. Minimum bend radius 102mm. This section is supplied with a similar...
Black, as per illustration. 23mm wide, glass 4.75mm to 6mm and panel 3.1mm to 3.5mm. Clearance between glass and panel 8mm. Minimum bend radius 102mm. This section is supplied with a similar...
Section as per illustration. Base size approx 15mm x 15mm. Soft black sponge extrusion.
Prices shown include VAT @ 20% where applicable
