247 search results found for "" to fit Ford - Anglia saloon 105E/106E (1959 to 1967)

B308 - 12 Volt 15W SBC BA15D base Warning bulb
Price from: £1.61 each (£1.93 inc. VAT)
12 volt SCC single contact BA15s 15 watt. Dimensions 18.5mm wide x 32mm tall with 15mm diameter cap, use stop etc. 
details
100E-2035-C - Brake pull off return spring
Price from: £12.00 each (£14.40 inc. VAT)
Brake pull off return spring, used front . overall length 94mm, 14.6mm diameter, 4 piece required per axle.
details
105E-7022400/1-KIT - push button outside door handles with key barrel (pair)
Price from: £146.30 pair (£175.56 inc. VAT)
new made outside door handles - offered as one each left and one right side of vehicle. with new key locking device fitted. sold in pairs only. see alternative listing without key device
details
CB BRUSH SET - Dynamo and starter brush sets
Price from: £18.32 SET (£21.98 inc. VAT)
Two, three and four brush dynamo and starter brush sets.
details
CB26 - Dynamo and starter brush sets - CB26 dynamo brush set
Price from: £18.95 SET (£22.74 inc. VAT)
Two, three and four brush dynamo and starter brush sets.

details
CB28 - Dynamo and starter brush sets - CB28 dynamo brush set
Price from: £18.95 SET (£22.74 inc. VAT)
Two, three and four brush dynamo and starter brush sets.

details
CB29 - Dynamo and starter brush sets - CB29 dynamo brush set
Price from: £18.95 SET (£22.74 inc. VAT)
Two, three and four brush dynamo and starter brush sets.

details
CB30 - Dynamo and starter brush sets - CB30 dynamo brush set
Price from: £18.95 SET (£22.74 inc. VAT)
Two, three and four brush dynamo and starter brush sets.

details
CB44 - Dynamo and starter brush sets - CB44 starter brush set
Price from: £19.38 SET (£23.26 inc. VAT)
Two, three and four brush dynamo and starter brush sets.

details
CB45 - Dynamo and starter brush sets - CB45 starter brush set
Price from: £18.95 SET (£22.74 inc. VAT)
Two, three and four brush dynamo and starter brush sets.

details
CB46 - Dynamo and starter brush sets - CB46 starter brush set
Price from: £19.38 SET (£23.26 inc. VAT)
Two, three and four brush dynamo and starter brush sets.

details
CB49 - Dynamo and starter brush sets - CB49 starter brush set
Price from: £18.95 SET (£22.74 inc. VAT)
Two, three and four brush dynamo and starter brush sets.

details
CB94 - Dynamo and starter brush sets - CB94 starter brush set
Price from: £19.38 SET (£23.26 inc. VAT)
Two, three and four brush dynamo and starter brush sets.

8/10hp 1937 onwards
details
CB94A - Dynamo and starter brush sets - CB94A starter brush set
Price from: £19.38 SET (£23.26 inc. VAT)
Two, three and four brush dynamo and starter brush sets.

details
CB96A - Dynamo and starter brush sets - CB96A dynamo brush set
Price from: £18.95 SET (£22.74 inc. VAT)
Two, three and four brush dynamo and starter brush sets.

details
CB97 - Dynamo and starter brush sets - CB97 dynamo brush set
Price from: £18.95 SET (£22.74 inc. VAT)
Two, three and four brush dynamo and starter brush sets.

details
CB100 - Dynamo and starter brush sets - CB100 dynamo brush set
Price from: £18.97 SET (£22.76 inc. VAT)
Two, three and four brush dynamo and starter brush sets.

8/10hp 1932-34
details
CB102 - Dynamo and starter brush sets - CB102 dynamo brush set
Price from: £18.53 SET (£22.24 inc. VAT)
Two, three and four brush dynamo and starter brush sets.

details
CB103 - Dynamo and starter brush sets - CB103 dynamo brush set
Price from: £18.95 SET (£22.74 inc. VAT)
Two, three and four brush dynamo and starter brush sets.

details
CB105 - Dynamo and starter brush sets - CB105 dynamo brush set
Price from: £18.95 SET (£22.74 inc. VAT)
Two, three and four brush dynamo and starter brush sets.

fits D33 - C575 dynamo
details
CB105-E - Dynamo and starter brush sets - CB105-E dynamo brush set
Price from: £18.97 SET (£22.76 inc. VAT)
Two, three and four brush dynamo and starter brush sets.

100E & 105E
details
CB114 - Dynamo and starter brush sets - CB114 dynamo brush set
Price from: £18.53 SET (£22.24 inc. VAT)
Two, three and four brush dynamo and starter brush sets.

details
CB123 - Dynamo and starter brush sets - CB123 dynamo brush set
Price from: £18.95 SET (£22.74 inc. VAT)
Two, three and four brush dynamo and starter brush sets.

details
CB126 - Dynamo and starter brush sets - CB126 starter brush set
Price from: £18.46 SET (£22.15 inc. VAT)
Two, three and four brush dynamo and starter brush sets.

8/10hp 1932-37
details
CB135 - Dynamo and starter brush sets - CB135 starter brush set
Price from: £19.38 SET (£23.26 inc. VAT)
Two, three and four brush dynamo and starter brush sets.

details
CB161 - Dynamo and starter brush sets - CB161 dynamo brush set
Price from: £18.95 SET (£22.74 inc. VAT)
Two, three and four brush dynamo and starter brush sets.

details
CB162 - Dynamo and starter brush sets - CB162 dynamo brush set
Price from: £18.95 SET (£22.74 inc. VAT)
Two, three and four brush dynamo and starter brush sets.

details
CB168 - Dynamo and starter brush sets - CB168 dynamo brush set
Price from: £19.38 SET (£23.26 inc. VAT)
Two, three and four brush dynamo and starter brush sets.

details
CB169 - Dynamo and starter brush sets - CB169 starter brush set
Price from: £19.38 SET (£23.26 inc. VAT)
Two, three and four brush dynamo and starter brush sets.

details
CB171 - Dynamo and starter brush sets - CB171 starter brush set
Price from: £19.38 SET (£23.26 inc. VAT)
Two, three and four brush dynamo and starter brush sets.

as Lucas 54212257
details
CB220 - Dynamo and starter brush sets - CB220 starter brush set
Price from: £19.38 SET (£23.26 inc. VAT)
Two, three and four brush dynamo and starter brush sets.

details
CB296 - Dynamo and starter brush sets - CB296 dynamo brush set
Price from: £18.97 SET (£22.76 inc. VAT)
Two, three and four brush dynamo and starter brush sets.

details
CB362 - Dynamo and starter brush sets - CB362 dynamo brush set
Price from: £18.95 SET of 3 (£22.74 inc. VAT)
Two, three and four brush dynamo and starter brush sets.

8/10hp 1935-40
details
CB363 - Dynamo and starter brush sets - CB363 dynamo brush set
Price from: £18.95 SET (£22.74 inc. VAT)
Two, three and four brush dynamo and starter brush sets.

details
CB364 - Dynamo and starter brush sets - CB364 dynamo brush set
Price from: £18.97 SET (£22.76 inc. VAT)
Two, three and four brush dynamo and starter brush sets.

 Applications include Morris Eight Series E, M10/4 Series 3 and Series M
details
CB365 - Dynamo and starter brush sets - CB365 dynamo brush set
Price from: £18.95 SET (£22.74 inc. VAT)
Two, three and four brush dynamo and starter brush sets.

details
CB366 - Dynamo and starter brush sets - CB366 dynamo brush set
Price from: £18.97 SET (£22.76 inc. VAT)
Two, three and four brush dynamo and starter brush sets.

Lucas ref 238061 . fits C45 C40 dynamo
details
CB370 - Dynamo and starter brush sets - CB370 starter brush set
Price from: £19.38 SET (£23.26 inc. VAT)
Two, three and four brush dynamo and starter brush sets.

Equivalent to the Lucas 255659 set - applications include Morris Eight Series E and M10/4 Series 3
details
CB371 - Dynamo and starter brush sets - CB371 dynamo brush set
Price from: £18.95 SET (£22.74 inc. VAT)
Two, three and four brush dynamo and starter brush sets.

details
CB373 - Dynamo and starter brush sets - CB373 dynamo brush set
Price from: £18.64 SET (£22.37 inc. VAT)
Two, three and four brush dynamo and starter brush sets.

details
CB374 - Dynamo and starter brush sets - CB374 dynamo brush set
Price from: £18.95 SET (£22.74 inc. VAT)
Two, three and four brush dynamo and starter brush sets.

details
CB405 - Dynamo and starter brush sets - CB405 dynamo brush set
Price from: £18.36 SET (£22.03 inc. VAT)
Two, three and four brush dynamo and starter brush sets.

8/10hp 1940 onwards
details
CB500 - Dynamo and starter brush sets - CB500 starter brush set
Price from: £18.32 SET (£21.98 inc. VAT)
Two, three and four brush dynamo and starter brush sets.

100E
details
353000-ESA - Core plug
Price from: £4.17 each (£5.00 inc. VAT)
Stainless steel cup shape type core plug, approx dimensions 42.8mm diameter, 5.8mm cup depth, overall thickness 7.2mm - 3 pieces required
details
105E-6258 - camshaft tag washer
Price from: £2.75 each (£3.30 inc. VAT)
camshaft lock washer, dimensions 58mm x 38mm with 35mm hole centres.
details
105E-6102 - piston set
Price from: £270.09 set of 4 pieces (£324.11 inc. VAT)
set of 4 pistons complete with rings, pins, clips etc. available in various over sizes.
details
105E-6102-060 - piston set - oversize 0.060"
Price from: £300.95 set of 4 pieces (£361.14 inc. VAT)
set of 4 pistons complete with rings, pins, clips etc. available in various over sizes.

details
105E-6102-STD - piston set - standard
Price from: £300.95 set of 4 pieces (£361.14 inc. VAT)
set of 4 pistons complete with rings, pins, clips etc. available in various over sizes.

details
105E-6102-0025 - piston set - oversize 0.0025"
Price from: £270.09 set of 4 pieces (£324.11 inc. VAT)
set of 4 pistons complete with rings, pins, clips etc. available in various over sizes.

details
105E-6102-040 - piston set - oversize 0.040"
Price from: £300.95 set of 4 pieces (£361.14 inc. VAT)
set of 4 pistons complete with rings, pins, clips etc. available in various over sizes.

details
105E-6102-020 - piston set - oversize 0.020"
Price from: £300.95 set of 4 pieces (£361.14 inc. VAT)
set of 4 pistons complete with rings, pins, clips etc. available in various over sizes.

details
105E-6102-030 - piston set - oversize 0.030"
Price from: £300.95 set of 4 piece (£361.14 inc. VAT)
set of 4 pistons complete with rings, pins, clips etc. available in various over sizes.

details
105E-6500-A - Valve tappet - 21.5mm diameter head
Price from: £66.22 set of 8 pieces (£79.46 inc. VAT)
Set of 8 pieces valve tappet. Standard head diameter - 21.5mm.
For smaller headed version (20.3mm) for GT camshafts - see 105E-6500-B
details
105E-7609 - Flywheel to crank tab washer
Price from: £4.15 each (£4.98 inc. VAT)
details
105E-6038 - Engine mount
Price from: £47.25 each (£56.70 inc. VAT)
Rubber bonded steel engine mount. hole centres to chassis 65mm side to side, 58mm top to bottom, engine hole centres 38mm.
details
AP-6900 - Aquaplane engine oil cooler - Ford 8 & 10 hp and 100E
Price from: £379.84 each (£455.81 inc. VAT)
Cast aluminium oil cooler (as original Aquaplane pattern). 285mm wide, 230mm tall, 45mm deep, female 1/4 BSP inlet/outlet thread, mounting bracket 60mm tall with 85mm long base and 8mm bolt hole....
details
105E-6731-A - oil filter element - short
Price from: £12.39 each (£14.87 inc. VAT)
suits bowl 115mm long. filter element 85mm tall, centre hole approx 21mm. other applications for Ford: Cortina Mk1 to Aug 1962 Cortina Mk1 1200 (113E) to Oct 1964
details
105E-6762 - rubber elbow
Price from: £8.27 each (£9.92 inc. VAT)
rubber elbow to connect ventilator outlet tube to engine. fits other models outside our range.
details
Y-5251 - Exhaust clamp
Price from: £19.61 each (£23.53 inc. VAT)
Cast clamp for clamp exhaust pipe to manifold - with two bolts
details
105E-5230 - exhaust system 105E saloon 997cc
Price from: £305.40 each (£366.48 inc. VAT)
We offer this new two piece exhaust system made from good quality mild steel
42mm clamp required for front pipe to silencer, (clamps supplied separately)
This product incurs the oversize...
details
123E-5230 - exhaust system 123E saloon 1198cc
Price from: £351.99 each (£422.39 inc. VAT)
We offer new two piece exhaust system made from good quality mild steel
42mm clamp required for front pipe to silencer (clamps supplied separately) 
This product incurs the oversize...
details
Y-9443 - manifold washer set (4)
Price from: £3.34 set of 4 piece (£4.01 inc. VAT)
exhaust manifold thick washer, 8mm hole,19mm diameter and 3mm thick. (approx dimensions) sold in sets of 4.
details
105E-5425-B - Front suspension mount upper
Price from: £61.90 each (£74.28 inc. VAT)
Front suspension upper mount through which the top of the suspension strut passes. Overall dimensions 113mm diameter (at flange) x 62mm tall, with three captive M8 studs on top. Supplied complete...
details
105E-5432-B - 105E front suspension strut assembly
Price from: £220.78 each (£264.94 inc. VAT)
refurbished item with new cartridge fitted, exchange item,

we can offer strut repair inserts, please see our 105E-5432-RK
details
105E-5432-RK - Front suspension strut insert
Price from: £108.88 each (£130.66 inc. VAT)
Cartridge insert for repair of front McPherson strut. will also suit Cortina mk1 and Classic Capri. Approx 413mm long. Supplied with top nut. Note bare weight 2.75kg
details
E38-DB-1 - Upper / Lower mount bearing
Price from: £11.90 each (£14.28 inc. VAT)
metal balls in cage. note that each side of vehicle requires two pieces - one used top and other under the mounting.
details
E37-DB-1 - upper / lower mount bearing race
Price from: £8.75 each (£10.50 inc. VAT)
upper suspension mount bearing race inner, (two per mounting) 19mm i/d x 24.5mm o/d, 29.3mm o/d at top of flange, 13mm deep.
details
113E-9911 - Accelerator pump diaphragm
Price from: £16.81 each (£20.17 inc. VAT)
For Solex carb only, not Fomoco 997cc or 1198cc engine, shaft dimensions 7.91mm diameter x 12.03 overaul length, diaphragm measures 35mm x 35mm.
details
105E-9502-A - carburettor gasket kit
Price from: £18.56 each (£22.27 inc. VAT)
for 997cc engine, Solex B30 ZIC-3
details
105E-9502-B - carburettor gasket kit
Price from: £14.82 each (£17.78 inc. VAT)
for Solex B30 PSE1-3,-2 carburettor
details
105E-9502-SK - Carburettor service kit
Price from: £56.78 each (£68.14 inc. VAT)
For the FoMoCo carburettor, includes gaskets, diaphram etc
details
113E-9933 - Economiser diaphragm
Price from: £16.36 each (£19.63 inc. VAT)
For Solex PSE1-2 carb, 1198cc engine
details
100E-9288-B - fuel pipe flexible
Price from: £28.21 each (£33.85 inc. VAT)
flexible fuel pipe to pump, overall length 300mm.
details
105E-9350-B - Fuel pump assembly
Price from: £49.92 each (£59.90 inc. VAT)
Metal top fuel pump used 1959 - 1960 early models.
PLEASE NOTE – When breaking apart and re-assembling compression fittings on copper pipework that feature a brass olive, you need to fit a...
details
Y-9350-BP - Fuel pump blanking plate
Price from: £7.27 each (£8.72 inc. VAT)
Steel plate to blank off fuel pump mount on engine block. 
Dimensions :- 60mm wide x 42mm tall x 6mm thick with 44mm hole centres.
details
100E-9349 - Fuel pump repair kit
Price from: £24.80 each (£29.76 inc. VAT)
With round type non return valves, body approx 60mm diameter. As BD 4 fuel pump repair kit.
details
E93A-9349 - fuel pump repair kit E36-Z-1
Price from: £26.04 each (£31.25 inc. VAT)
AC repair kit BD6, body approx 80mm diameter. suits larger export E93A pump and glass top 105E fuel pump.
details
E93A-9374 - Fuel pump spacer block
Price from: £12.05 each (£14.46 inc. VAT)
Larger 1/4" thick (approx 6mm) spacer for fuel pump mounting, fitted to post war up-rights, as well as 107E, 105E and 307E, overall dimensions 63mm wide x 55mm tall.
details
E493A-9030 - locking fuel filler cap, FORD script
Price from: £43.62 each (£52.34 inc. VAT)
chrome finish locking vented fuel (gas tank) filler cap, supplied with two keys.
details
E0A-7059 - circlip ring for clutch slave cylinder
Price from: £0.97 each (£1.16 inc. VAT)
Retaining circlip for clutch slave cylinder, approx 25.7mm ID
details
105E-7550-C - Clutch friction plate for 105E
Price from: £77.73 each (£93.28 inc. VAT)
New manufactured clutch centre plate, 7 1/4" diameter.
details
105E-7527 - Clutch pedal rubber
Price from: £6.35 each (£7.62 inc. VAT)
Clutch pedal rubber pad, 67mm tall,  55mm wide at top tapering down to 41mm.
details
105E-7563-D - Ford 105E Clutch Pressure Plate
Price from: £135.00 each (£162.00 inc. VAT)
Ford 105E re-conditioned clutch pressure plate, exchange item.****We must receive your serviceable core item before we despatch a reconditioned unit**** 
details
105E-7580-B - Clutch release bearing
Price from: £55.04 each (£66.05 inc. VAT)
Dimensions approx 66mm outside, 35.3mm inside x 15.6mm thick
details
E305-GD-1 - Clutch slave cylinder
Price from: £68.23 each (£81.88 inc. VAT)
Clutch slave cylinder fitting the following classic Ford models; 1959 - '68 Anglia 105E, 123E, 307E, 309E van and estate. 1962- '66 Cortina MK1 1200, 1500 ( NOT Lotus models) 1963 - '65 Ford...
details
E149-Z-1 - clutch slave cylinder seal kit
Price from: £5.95 each (£7.14 inc. VAT)
details
E118-GD-5 - Flexible hose
Price from: £21.39 each (£25.67 inc. VAT)
Clutch slave cylinder hose
details
E249-GD-1 - gaiter
Price from: £19.76 each (£23.71 inc. VAT)
gaiter for clutch release fork. fits into hole 54mm x 46mm on the clutch bell housing
details
105E-7022400/1 - push button outside door handles without key barrel (pair)
Price from: £133.85 pair (£160.62 inc. VAT)
new made outside door handles - offered as one each left and one right side of vehicle. without locking device - you fit your own old device. sold in pairs only.
details
357A - 7" Headlamp bowl - 3 Adjuster type for Lucas pattern 700 series lights
Price from: £40.69 each (£48.83 inc. VAT)
Metal headlamp bowl for standard 7" Lucas 700 series type light units. Three adjuster version. Supplied with metal back shell, chrome retaining rim holder and adjusters.
details
105E-13209-B - Front left side lens
Price from: £21.45 each (£25.74 inc. VAT)
Front left clear side lamp lens marked P64
details
105E-13208-B - front right side lens
Price from: £21.45 each (£25.74 inc. VAT)
front right clear side lamp lens marked P64
details
106E-13329-C - Lens left amber
Price from: £28.72 each (£34.46 inc. VAT)
Front left hand lens amber (triangular shape) marked A-FP1-59
details
E74-NB-1 - lens left clear
Price from: £24.64 each (£29.57 inc. VAT)
front left hand lens clear (triangular shape) marked A-FP1-59
details
106E-13328 - Lens right amber
Price from: £28.72 each (£34.46 inc. VAT)
Front right hand lens amber (triangular shape) marked A-FP1-59
details
105E-13208-A - lens right clear
Price from: £24.64 each (£29.57 inc. VAT)
front right hand lens clear (triangular shape) marked A-FP1-59
details
105E-13329-A - rear amber lens - saloon
Price from: £46.65 each (£55.98 inc. VAT)
rear amber top lens for saloon model, marked A-R1-59
details
106E-13329-A - rear red lens - saloon
Price from: £46.65 each (£55.98 inc. VAT)
rear red top lens for saloon model, marked A-R1-59. export models
details
204E-13444 - rear red lower lens - saloon
Price from: £51.08 each (£61.30 inc. VAT)
rear red circular lower lens for saloon model, marked C-RTS-59. note this lens is supplied without rear foil.
details
357-SB - Sealed beam headlamp connector with lead
Price from: £9.78 each (£11.74 inc. VAT)
Sealed beam headlamp connector with lead, nylon block three Lucar (6,3mm spade) connector, three wires (Red, Blue/Red, Blue/White) 90mm long with crimped on bullets, overall length 115mm.
For...
details
E113/114-PC-1 - wing lamp surround bezel trim
Price from: £46.65 pair (£55.98 inc. VAT)
Remanufactured chrome front lamp surround bezel. supplied as car set only (2 pieces) E113-PC-1 right hand, E114-PC-1 left hand
details
105E-13215/6 - Wing or front flasher lamp body
Price from: £166.90 pair (£200.28 inc. VAT)
Re-manufactured chrome plated casting for front side lamp (park lamp) and front flasher. We supply these in pair (car set) for you to transfer your lens and bulb holder etc.
details
Tool3 - AF socket set - 9 piece
Price from: £28.01 each (£33.61 inc. VAT)
9 piece AF hexagonal socket set for most general workshop applications. Drive size 3/8". A good value workshop set.
Sizes 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4" across flats....
details
Tool1 - Spanner set - AF size 14 piece
Price from: £43.50 each (£52.20 inc. VAT)
14 piece AF spanner set in holder pouch. Satin chrome finish spanners which are open end at one end, ring spanner at other. Drop forged hardened and tempered.
Chrome vanadium steel. sizes 1/4",...
details
Tool4 - Spanner set - AF size 6 piece
Price from: £15.54 each (£18.65 inc. VAT)
6 piece AF spanner set in clip holder. Satin chrome finish spanners which are open end at one end, ring spanner at other. Drop forged hardened and tempered.
Chrome vanadium steel. A good value...
details
106E-17262-B - speedometer cable
Price from: £28.92 each (£34.70 inc. VAT)
inner and outer cable drive assembly, 60" long.
details
105E-1225-A - Rear wheel bearing
Price from: £43.29 each (£51.95 inc. VAT)
Sealed bearing supplied with 105E-1180 retainer. Fits:- all 107E, 105E range through to september 1966, Cortina Mk1 1962-66, Consul 315 1961-64 Consul Capri 1961-64, Corsair 1963-70. dimensions...
details
2925E-1225-A - Rear wheel bearing
Price from: £43.40 each (£52.08 inc. VAT)
Sealed bearing supplied with 105E-1180 retainer. application 105E range from september 1966 onward, all Escort Mk1, Cortina Mk1 and Capri Mk1 to september 1969. dimensions outer case diameter 62mm...
details
105E-7003110-B - 105E front screen window rubber
Price from: £87.88 each (£105.46 inc. VAT)
Front window windshield weatherstrip rubber (with flap lower corners) one piece moulded part.
details
105E-7042084 - 105E rear screen window rubber
Price from: £87.65 each (£105.18 inc. VAT)
Rear window weatherstrip rubber, one piece moulded part.
details
105E-7021448/9 - quarterlight rubber
Price from: £56.14 pair (£67.37 inc. VAT)
moulded part weatherseal for front opening quarter window on door. supplied in pair only.
details
E33-NB-1 - sidelight rubber boot
Price from: £5.13 each (£6.16 inc. VAT)
approx dimensions - internal 31mm, 73mm long overall.
details
869.16 - Fuel filler pipe grommet - 73mm panel hole, 62mm ID
Price from: £11.69 each (£14.03 inc. VAT)
Moulded part, black. 62mm internal diameter, fits panel hole 73mm diameter, 102mm overall diameter.
details
105E-17773-B - bumper iron rubber grommet
Price from: £6.98 each (£8.38 inc. VAT)
moulded rubber part, black. shaped slot 32mm x 8mm at widest. base overall 58mm x 34mm approx, fits into panel hole approx 43mm x 19mm. sold each.
note photo shows front and rear views for...
details
105E-18056 - Shock absorber link
Price from: £37.65 each (£45.18 inc. VAT)
Armstrong reference 7426, studs approx 130mm centres.
details
105E-5719/81 - Rear spring bush kit
Price from: £76.58 each (£91.90 inc. VAT)
Rear spring bush kit, comprising 8 rubber bush for rear spring and hanger and 2 front Silentbloc type bush
details
QSK59 - Front suspension bush kit
Price from: £69.97 each (£83.96 inc. VAT)
12 piece kit comprising 4 piece 105E-3096-A and 8 pieces 105E-3063-A. Also applicable Classic Capri 315 109E & 116E.
details
106E-3304-REP - Steering drag link assembly - Left hand drive
Price from: £109.62 each (£131.54 inc. VAT)
Drag link assembly for left hand drive vehicle. Supplied with replacement E20-LB-1 idler bush. Centre mount bolts spaced approx 257mm.
details
105E-3304-REP - Steering drag link assembly - Right hand drive
Price from: £109.62 each (£131.54 inc. VAT)
Drag link assembly for right hand drive vehicle. Supplied with replacement E20-LB-1 idler bush. Centre mount bolts spaced approx 257mm.
details
E20-LB-1 - Steering idler stud assembly - FORD OE Thread
Price from: £29.25 each (£35.10 inc. VAT)
With original coarse thread
details
105E-3079-B - Track control arm (left hand) -Exchange
Price from: £119.73 each (£143.68 inc. VAT)
Refurbished track control arm L/H - Exchange item,
details
105E-3078-B - Rrack control arm (right hand) - Exchange
Price from: £119.73 each (£143.68 inc. VAT)
Refurbished track control arm R/H - Exchange item
details
QSJ-172-RK - Track control arm ball stud repair kit
Price from: £84.61 each (£101.53 inc. VAT)
Repair kit comprising parts listed and shown in product image Nyloc nut, Gaiter, Ball-Pin, Lower Cup, Spring, Circlip, Welch Plug & Assorted Shims. suits other models Classic Capri, Consul,...
details
100E-3290-B - track rod end (l/h thread)
Price from: £29.44 each (£35.33 inc. VAT)
track rod end, left hand thread. 9/16 UNF. remanufactured part made 'sealed for life'.
details
100E-3289-B - track rod end (r/h thread)
Price from: £29.44 each (£35.33 inc. VAT)
track rod end right hand thread. 9/16 UNF. remanufactured part which is made 'sealed for life' for grease
details
789 - Draught excluder - Snap on, black, 10mm bead with twin lips
Price from: £6.15 metre (£7.38 inc. VAT)
Small version of self gripping plastic door trim with 10mm diameter bead. Available in black only. Internal depth of carrier 10mm, carrier grip range 2mm - 3mm, overall seal dimension 17mm from...
details
522 - Millboard panel board - For trim panels
Price from: £34.25 each (£41.10 inc. VAT)
Millboard, a flexible compressed card for trim panels etc. One side is lightly embossed grain black. This board will fit the tightest curves as it is 2mm thick. Sheet size 1560mm x 1240mm....
details
100E-1139 - Front hub grease cap
Price from: £18.95 each (£22.74 inc. VAT)
Spun steel, 41 mm push fit into drum, preventing grit getting into the bearing
details
105E-1201/105E-1202 - Front wheel inner bearing
Price from: £31.12 each (£37.34 inc. VAT)
Taper roller inner front wheel bearing assy. Fits :- 100E & 300E with 1.000" dia stub Prefect 107E Anglia 105E & 307E Cortina Mk 1 1963-66
details
Y-1195-B - Front wheel bearing retaining washer
Price from: £6.09 each (£7.31 inc. VAT)
Front wheel bearing retaining washer, Dimensions, 32mm o/d x 16mm i/d x 2.5mm thick with a 3mm key way tag.
details
105E-1130 - hub cap chrome
Price from: £40.88 each (£49.06 inc. VAT)
Plain top, later style hub cap.
Approx. 238mm overall diameter. inside edge approx 226mm.
details
E2-DC-1 - spacer inner front wheel bearing
Price from: £9.62 each (£11.54 inc. VAT)
inner front wheel bearing spacer, fits 1.00" stub axle.
details
CE-1012 - Wheel nut
Price from: £4.73 each (£5.68 inc. VAT)
Wheel nut for the 8/10hp cars and 100E models, 7/16"UNF thread, 3/4" A/F hex flats..
details
WT-13 - Wheel rim trim - For 13" wheels
Price from: £59.00 each (£70.80 inc. VAT)
Decorative chrome rim trim for 13" wheels. This item fits against the inner edge of the outer steel wheel rim, being held in place with the integral clips as shown on main picture.
Export of this...
details
100E-18303-C - wheel trim set (4 pieces)
Price from: £67.00 set of 4 pieces (£80.40 inc. VAT)
aluminium 4 piece wheel trim for 13" wheels. 4 parts supplied as car set.
details
E183/4-AD-1-upper - door sponge seal - upper
Price from: £13.61 each (£16.33 inc. VAT)
upper door sponge seal - which you glue to the door surround - for ONE door note that the original sponge door seal surround was a one piece item, the cross section differs from the top to the...
details
105E-5719 - rear shackle bush rubber
Price from: £6.91 each (£8.29 inc. VAT)
bush (rear spring shackle), dimensions:- overall length 1 3/8", main body 15/16" long x 3/4" dia with 3/8" hole through the centre
details
105E-5781-B - Rear spring bush silentbloc - 28.6mm OD, 9.5mm ID, 51.6/55.7 long
Price from: £24.78 each (£29.74 inc. VAT)
Silentbloc bush 28.6mm outer diam x 9.5mm inner diam, 55.7mm inner length, 51.6mm outer length
details
E0A-9030 - Fuel filler cap
Price from: £26.91 each (£32.29 inc. VAT)
New manufactured polished stainless steel vented fuel filler cap 72mm diameter with 53mm locking-locating lugs. This is a replacement cap which differs slightly in appearance to the original fuel...
details
105E-3096-A - track control arm bush
Price from: £6.75 each (£8.10 inc. VAT)
front suspension track control arm to roll bar(stabilizer) outer bush 4 per vehicle.
details
100E-3063 - Track control arm and roll bar bush
Price from: £6.79 each (£8.15 inc. VAT)
Front suspension track control arm inner bush and roll bar(stabilizer) bush 8 per vehicle. Dimensions:- 22mm tall, 9.5mm bore, top flange 30mm, beneath flange 25mm tapering down to 23mm.
details
841STR - Hydraulic grease nipple - Straight
Price from: £1.10 each (£1.32 inc. VAT)
Hydraulic grease nipple - theads 1/8"BSP, 1/4"BSF, 5/16"BSF, 3/8"BSF, 1/4"UNF, 5/16"UNF. Use with 4 jaw grease gun connectors e.g. 108E and 108D. If you are unsure of your grease nipple thread...
details
841STR-1/8BSP - Hydraulic grease nipple - Straight - 1/8" BSP
Price from: £1.10 each (£1.32 inc. VAT)
Hydraulic grease nipple - theads 1/8"BSP, 1/4"BSF, 5/16"BSF, 3/8"BSF, 1/4"UNF, 5/16"UNF. Use with 4 jaw grease gun connectors e.g. 108E and 108D. If you are unsure of your grease nipple thread...
details
841STR-1/4BSF - Hydraulic grease nipple - Straight - 1/4" BSF
Price from: £1.10 each (£1.32 inc. VAT)
Hydraulic grease nipple - theads 1/8"BSP, 1/4"BSF, 5/16"BSF, 3/8"BSF, 1/4"UNF, 5/16"UNF. Use with 4 jaw grease gun connectors e.g. 108E and 108D. If you are unsure of your grease nipple thread...
details
841STR-5/16BSF - Hydraulic grease nipple - Straight - 5/16" BSF
Price from: £1.10 each (£1.32 inc. VAT)
Hydraulic grease nipple - theads 1/8"BSP, 1/4"BSF, 5/16"BSF, 3/8"BSF, 1/4"UNF, 5/16"UNF. Use with 4 jaw grease gun connectors e.g. 108E and 108D. If you are unsure of your grease nipple thread...
details
841STR-3/8BSF - Hydraulic grease nipple - Straight - 3/8" BSF
Price from: £1.10 each (£1.32 inc. VAT)
Hydraulic grease nipple - theads 1/8"BSP, 1/4"BSF, 5/16"BSF, 3/8"BSF, 1/4"UNF, 5/16"UNF. Use with 4 jaw grease gun connectors e.g. 108E and 108D. If you are unsure of your grease nipple thread...
details
841STR-1/4UNF - Hydraulic grease nipple - Straight - 1/4" UNF
Price from: £1.10 each (£1.32 inc. VAT)
Hydraulic grease nipple - theads 1/8"BSP, 1/4"BSF, 5/16"BSF, 3/8"BSF, 1/4"UNF, 5/16"UNF. Use with 4 jaw grease gun connectors e.g. 108E and 108D. If you are unsure of your grease nipple thread...
details
841STR-5/16UNF - Hydraulic grease nipple - Straight - 5/16" UNF
Price from: £1.10 each (£1.32 inc. VAT)
Hydraulic grease nipple - theads 1/8"BSP, 1/4"BSF, 5/16"BSF, 3/8"BSF, 1/4"UNF, 5/16"UNF. Use with 4 jaw grease gun connectors e.g. 108E and 108D. If you are unsure of your grease nipple thread...
details
841STR-PUSH - Hydraulic grease nipple - Straight - 3/16" DRIVE FIT
Price from: £1.10 each (£1.32 inc. VAT)
Hydraulic grease nipple - theads 1/8"BSP, 1/4"BSF, 5/16"BSF, 3/8"BSF, 1/4"UNF, 5/16"UNF. Use with 4 jaw grease gun connectors e.g. 108E and 108D. If you are unsure of your grease nipple thread...
details
841ANG - Hydraulic grease nipple - 45 degree angle
Price from: £1.80 each (£2.16 inc. VAT)
Hydraulic grease nipples, 45 degree nipple to thread angle, threads 1/8"BSP, 1/4"BSF, 5/16"BSF, 3/8"BSF, 1/4"UNF, 5/16"UNF. Use with 4 jaw grease gun connectors e.g. 108E and 108D. If you are...
details
841ANG-1/8BSP - Hydraulic grease nipple - 45 degree angle - 1/8" BSP
Price from: £1.80 each (£2.16 inc. VAT)
Hydraulic grease nipples, 45 degree nipple to thread angle, threads 1/8"BSP, 1/4"BSF, 5/16"BSF, 3/8"BSF, 1/4"UNF, 5/16"UNF. Use with 4 jaw grease gun connectors e.g. 108E and 108D. If you are...
details
841ANG-1/4BSF - Hydraulic grease nipple - 45 degree angle - 1/4" BSF
Price from: £1.80 each (£2.16 inc. VAT)
Hydraulic grease nipples, 45 degree nipple to thread angle, threads 1/8"BSP, 1/4"BSF, 5/16"BSF, 3/8"BSF, 1/4"UNF, 5/16"UNF. Use with 4 jaw grease gun connectors e.g. 108E and 108D. If you are...
details
841ANG-5/16BSF - Hydraulic grease nipple - 45 degree angle - 5/16" BSF
Price from: £1.80 each (£2.16 inc. VAT)
Hydraulic grease nipples, 45 degree nipple to thread angle, threads 1/8"BSP, 1/4"BSF, 5/16"BSF, 3/8"BSF, 1/4"UNF, 5/16"UNF. Use with 4 jaw grease gun connectors e.g. 108E and 108D. If you are...
details
841ANG-3/8BSF - Hydraulic grease nipple - 45 degree angle - 3/8" BSF
Price from: £1.80 each (£2.16 inc. VAT)
Hydraulic grease nipples, 45 degree nipple to thread angle, threads 1/8"BSP, 1/4"BSF, 5/16"BSF, 3/8"BSF, 1/4"UNF, 5/16"UNF. Use with 4 jaw grease gun connectors e.g. 108E and 108D. If you are...
details
841ANG-1/4UNF - Hydraulic grease nipple - 45 degree angle - 1/4" UNF
Price from: £1.80 each (£2.16 inc. VAT)
Hydraulic grease nipples, 45 degree nipple to thread angle, threads 1/8"BSP, 1/4"BSF, 5/16"BSF, 3/8"BSF, 1/4"UNF, 5/16"UNF. Use with 4 jaw grease gun connectors e.g. 108E and 108D. If you are...
details
841ANG-5/16UNF - Hydraulic grease nipple - 45 degree angle - 5/16" UNF
Price from: £1.80 each (£2.16 inc. VAT)
Hydraulic grease nipples, 45 degree nipple to thread angle, threads 1/8"BSP, 1/4"BSF, 5/16"BSF, 3/8"BSF, 1/4"UNF, 5/16"UNF. Use with 4 jaw grease gun connectors e.g. 108E and 108D. If you are...
details
E183/4-AD-1-lower - door sponge seal - lower
Price from: £13.16 each (£15.79 inc. VAT)
lower door sponge seal - which you glue to the door surround - for ONE door note that the original sponge door seal surround was a one piece item, the cross section differs from the top to the...
details
105E-7022428/36 - outside handle gaskets
Price from: £1.46 each (£1.75 inc. VAT)
large and small handle gasket pad
details
power-badge - Aquaplane badge
Price from: £34.07 each (£40.88 inc. VAT)
vehicle badge - Performance Equipment by Aquaplane Oulton Broad, England yellow and black enamel with chrome backing.. badge 50mm diameter, with single threaded retaining stud and nut to rear -...
details
EB-9243-A - Fuel pipe union nut - 1/2" UNF
Price from: £3.10 each (£3.72 inc. VAT)
Fuel pipe union nut, fits carburettor inlet, fuel pump and tank sender unit, 1/2" UNF thread accepts 1/4" o/d pipe.
details
Aq-badge - Performance Equipment by Aquaplane of Oulton Broad badge
Price from: £31.76 each (£38.11 inc. VAT)
Performance Equipment by Aquaplane Oulton Broad, England badge bar mount badge.
yellow and black enamel with chrome backing.
badge 75mm diameter, with mounting flange to base - for fitting with...
details
105e-17700-head - mirror head clamp/ball fitting
Price from: £18.39 each (£22.07 inc. VAT)
interior mirror with clamp socket to accept 12.5mm ball on arm/stalk. plastic finish available in grey. size - grey 61mm x 151mm new old stock, slightly bad silvering on mirror edges.
details
key-fob - Aquaplane of Oulton Broad key ring
Price from: £11.23 each (£13.48 inc. VAT)
key ring fob - Performance Equipment by Aquaplane Oulton Broad, England yellow and black enamel key ring on black leather backing. badge 32mm diameter. plated ring. these are specially...
details
lapel-pin - Aquaplane of Oulton Broad lapel pin badge
Price from: £6.75 each (£8.10 inc. VAT)
lapel or cap pin - Performance Equipment by Aquaplane Oulton Broad, England
yellow and black enamel lapel or cap pin.
badge 20mm diameter. plated outer, retaining clasp to rear.
picture shows...
details
NPC - Pressed aluminium number plate - Pre 1963 (EACH)
Price from: £43.98 Each (£52.78 inc. VAT)
Pressed aluminium number plate of pre 1963 style. 3 1/2" (88mm) digits (maximum of 6) embossed from rear in the black stove enamel, raised edge plate. Beaded or beadless edge available as...
details
NPH - Pressed aluminium number plate - 1963 to 1973 style (supply to 1st Jan 1980) (EACH)
Price from: £43.98 each (£52.78 inc. VAT)
Pressed aluminium plate of 1963 to 1973 style. 3 1/8" (79mm) digits (maximum of 7) embossed from rear in the stove enamel, raised edge beaded or beadless plate available as required.
Please chose...
details
NPK - Silver plastic digit number plate - 1963 to 1973 style (supply to 1st Jan 1980)
Price from: £36.80 each (£44.16 inc. VAT)
Silver plastic digit plate of 1963 to 1973 style, 3 1/8" (79mm) flat top digits (maximum of 7) on a black background plate.
Chose from oblong (20.5"x 4.5" /520mm x 111mm) bevel edge, or square...
details
NPF - White plastic digit number plate - Pre 1963 (EACH)
Price from: £53.90 each (£64.68 inc. VAT)
White plastic digit plate of pre 1963 style, 3 1/2" (88mm) flat top digits (maximum of 6) on a black background plate.
Please chose oblong (20.5"x 4.5" / 520mm x 111mm) with a beadless edge, or...
details
NPJ - White plastic digit number plate - 1963 to 1973 style (supply to 1st Jan 1980)
Price from: £35.50 each (£42.60 inc. VAT)
White plastic digit plate of 1963 to 1973 style 3 1/8" (79mm) flat top digits (maximum of 7) on a black background plate.
Please choose from oblong (20.5" x 4.5" / 520mm x 111mm) with beadless...
details
CA1399 - Tyre valve cap - Plain top (Each)
Price from: £0.85 each (£1.02 inc. VAT)
Chrome valve cover cap that fits on to the tyre valve - including modern types. We offer a plain rounded top pattern (this part) or alternatively one with a raised top with slot for valve removal...
details
E52-FF-1 - brake pipe
Price from: £7.27 each (£8.72 inc. VAT)
front brake wheel cylinder connecting brake pipe, flared with convex ends and fitted with two male union nuts.
details
105E/s - Ford Anglia workshop manual 105E/307E
Price from: £36.70 each
Reprint of Ford Anglia full workshop manual covering models 105E, 123E, 307E, saloon, estate and van. Some parts are also applicable to model 107E. Plenty of comprehensive information, including...
details
105-18051 - Left hand rear shock absorber - outright
Price from: £165.90 each (£199.08 inc. VAT)
New made replacement rear lever arm shock absorber - sold outright
details
105-18050 - Right hand rear shock absorber - outright
Price from: £165.90 each (£199.08 inc. VAT)
New made replacement rear lever arm shock absorber - sold outright
details
part.105E - parts list for 105E/307E Anglia
Price from: £31.25 each
Reprint of full Enfo parts list with illustrations for the 105E/123E/307E range 1959 to 1968. covers all models. reproduced by kind permission of Ford Motor Company, UK no VAT on books and...
details
E0A-2200 - bleed nipple cap
Price from: £0.51 each (£0.61 inc. VAT)
brake/clutch bleed nipple cap, keeps nipple free of dirt etc.
details
E55-FB-2 - Brake adjuster cylinder assembly
Price from: £28.62 each (£34.34 inc. VAT)
As Girling part 64217022. Please check individual application. Supersedes part E56-FB-1. Leyland reference 37H6134
details
100E-2208 - Brake bleed nipple
Price from: £2.25 each (£2.70 inc. VAT)
Replacement bleed nipple for brake slave cylinders, 3/8" UNF thread
details
400E-2079 - Flexible front brake hose
Price from: £16.72 each (£20.06 inc. VAT)
Front brake flexible hose for 105E & 307E models, 13" long (330mm) including threads.
details
105E-2454 - Brake pedal rubber
Price from: £6.03 each (£7.24 inc. VAT)
Brake pedal rubber pad, 67mm tall,  55mm wide at top tapering down to 41mm.
details
105E-2263-CAR - Brake pipe kit
Price from: £97.83 each (£117.40 inc. VAT)
Copper brake pipe kit, to fit 105E/123E saloon models 1959-67, extra pipe supplied for 65-67 models that fits between rear junction and rear brake hose.
details
100E-2041-RK - Brake shoe snail adjuster repair kit
Price from: £13.49 each (£16.19 inc. VAT)
Snail cam adjuster, for applications with girling brakes. Girling part ref GA9 / 64271022 also applicable to Cortina Mk1 1200, Escort Mk1, Triumph Herald, Reliant, Vauxhall Viva HA, HB and HC and...
details
204E-2068/71 - Brake shoe steady kit
Price from: £20.70 set (£24.84 inc. VAT)
Axle set of springs, pins and washers. Girling ref SP1006/2
details
100E-2018-C - Front brake shoe set 8 inch
Price from: £62.20 each (£74.64 inc. VAT)
8" relined, shoe measures 32mm wide,axle set, exchange, 1957-on,
details
100E-2061-B - Front wheel cylinder
Price from: £35.76 each (£42.91 inc. VAT)
Right hand 57 onward, steel body with flat top piston
details
100E-2062-B - Front wheel cylinder
Price from: £32.25 each (£38.70 inc. VAT)
Left hand '57 onward, steel body with flat top piston
details
105E-2853-A - Hand brake cable
Price from: £62.47 each (£74.96 inc. VAT)
Complete inner and outer hand brake cable for 105E car and estate models, outer cable front ferrule has 8cm long threaded section with two lock nuts, rear ferrule machined to accept horseshoe clip...
details
100E-7012160 - Handbrake lever boot, Black.
Price from: £20.78 each (£24.94 inc. VAT)
Handbrake lever rubber gaiter for 100E models (later type). 
Dimensions :- Base 175mm x 70mm wide with six fixing holes, 75mm tall with 26mm x 8mm slot for handbrake lever.
details
105E-7012160 - Handbrake lever boot. Grey
Price from: £20.78 each (£24.94 inc. VAT)
Handbrake lever rubber gaiter for 105E models (later type). 
Dimensions :- Base 175mm x 70mm wide with six fixing holes, 75mm tall with 26mm x 8mm slot for handbrake lever.
details
100E-2140 - Master cylinder
Price from: £79.80 each (£95.76 inc. VAT)
Application - brake and clutch, note the connecting rod will require changing for the original on vehicle, depending on application.
details
113E-2220 - Rear brake shoe set
Price from: £60.20 each (£72.24 inc. VAT)
Relined brake shoe set (4 piece set) used on 1198cc 123E , also applicable to Cortina Mk1 and Escort Mk1
details
100E-2220-C - Rear brake shoe set 8 inch
Price from: £60.20 each (£72.24 inc. VAT)
8" drum, relined, shoe measures 32mm wide, exchange item, 1957-. axle set,
details
100E-2261-D - Rear wheel cylinder 0.75 inch bore
Price from: £39.75 each (£47.70 inc. VAT)
57-, alloy body, plain end to piston. used later 100E/300E, all 107E and 1198cc 105E/307E models. Girling ref 64673476. also applicble to Escort Mk1 and Cortina Mk1
details
100E-SP2861 - Rear wheel cylinder dust cover kit
Price from: £20.70 each (£24.84 inc. VAT)
Part 100E-2663-C rubber inc wheel cylinder retaining plates E15-FB-1 & E15-FB-1 (one axle set)
details
100E-2128-B - Rear wheel cylinder seal kit
Price from: £11.38 each (£13.66 inc. VAT)
'55 onwards, axle set, suits cross head piston and later flat top. Girling reference SP 2027
details
E512/E513-AM-1 - Super rear quarter panel extension moulding
Price from: £62.84 pair (£75.41 inc. VAT)
chrome rear quarter panel upper moulding extension trims - parts E512-AM-1 (right side) and E513-AM-1 (left side) as used on Super model sedan. these are chrome on brass/bronze new castings with...
details
100E-2296-B - Brake pull off return spring
Price from: £8.41 each (£10.09 inc. VAT)
Rear brake shoe pull off return spring, with coil at each end. used 02/57 to 07/62. 
Dimensions 112mm overall, long coil 45mm, short coil 30mm, spring coil 8mm in diameter.
details
100E-9627-A - carburetor to air cleaner rubber gasket
Price from: £10.79 each (£12.95 inc. VAT)
rubber gasket between carburetor and air cleaner. approx 45mm inside x 23mm deep
details
105E-9627 - air cleaner to carburetor grommet
Price from: £12.02 each (£14.42 inc. VAT)
rubber grommet seal for carburetor to air cleaner. measures approx 58mm inside x 25mm deep
details
105E-8250 - cylinder head water outlet
Price from: £32.68 each (£39.22 inc. VAT)
aluminium water connection - outlet - thermostat housing, dimensions :- base 92mm x 66mm with 73mm hole centres, overall height 60mm, accepts 38mm bore hose.
details
105E-6563-B - Rocker shaft
Price from: £46.38 each (£55.66 inc. VAT)
New old stock shaft (rocker arm) assy, for the Ford O.H.V. engines 1961 onwards fits 997cc, 1200cc,1300cc,1500cc & 1600cc. overall length 376mm.
details
Tool5 - Feeler gauge
Price from: £7.99 each (£9.59 inc. VAT)
Combination leaf feeler gauge accurately measures gaps between components. Hardened and polished carbon steel leaves clearly marked with sizes. 26 leaves 0.051mm to 0.635mm thicknesses.
Export of...
details
105E-7039 - Universal joint
Price from: £29.80 each (£35.76 inc. VAT)
Replacement universal joint supplied with four circlips
details
E175-NC-1 - Rear lamp gasket
Price from: £3.91 each (£4.69 inc. VAT)
Lower lamp housing to body gasket
details
105E-7020930 - Weatherstrip clip
Price from: £2.78 each (£3.34 inc. VAT)
Clip "Ford type" for weatherstrip, fits into side slot ( side tag 4mm wide x 8mm long). dimensions approx 16mm long, 13mm high, gripper width max 2.5mm.
details
E25-FD-2 - handbrake cable clip
Price from: £1.29 each (£1.55 inc. VAT)
handbrake cable retainer clip, holds handbrake cable into handbrake cross rod bracket.
details
KEY - Replacement lock/ignition key (PAIR)
Price from: £20.20 pair (£24.24 inc. VAT)
We offer replacement keys, cut for door and ignition switch. These are cut to number only, 2 keys are supplied. Supply is restricted to the following key series - key sequence numbers MRN1 through...
details
105E-16606-A - Anglia name plate
Price from: £55.31 each (£66.37 inc. VAT)
chrome plate name plate with red ANGLIA infill badge for mounting on to radiator grill panel (under bonnet panel). although NOT original part it is a good remake. we offer the this with a moulded...
details
105E-7042514 - Anglia rear boot badge
Price from: £30.30 each (£36.36 inc. VAT)
chrome script badge
details
E316/E254-AM-1 - Ford Anglia deluxe badge and base
Price from: £36.90 each (£44.28 inc. VAT)
Coloured roundel badge with chrome base for rear quarter panel. 5 gold stars on red background with plain off white outer. Chrome base. Originally used September 1961 onwards.
details
E252/E254-AM-1 - Ford Anglia deluxe badge roundel
Price from: £38.77 each (£46.52 inc. VAT)
Early coloured roundel badge for rear quarter panel with rear chrome mounting. 5 gold star on red with light grey outer written Product of Ford Motor Co Ltd. Used to September 1961
details
204E-16079-B - Ford oval wing badge
Price from: £32.80 each (£39.36 inc. VAT)
Blue Ford oval emblem on silver back. Dimensions 88mm long x 25mm tall, held with two 3mm pins with 50mm centres. Used approx 1966 onward and mounted to lower near side wing.
details
109E-16079-D - Ford rectangular wing badge
Price from: £31.20 each (£37.44 inc. VAT)
Blue Ford emblem on silver back (not White). used mid 1961 onward - fixed to nearside front wing. pins 50.5mm apart also used on: Ford Cortina, Escort & Consul
details
E103/E104-NB-1 - headlamp bezel extension dog leg
Price from: £40.87 pair (£49.04 inc. VAT)
chrome dog leg ornament extension fitting off headlamp bezel on DeLuxe saloon and estate models. we supply in car set (pair) only. E103-NB-1 for right hand and E104-NB-1 for left hand.
details
E276-AM-1 - Rear boot badge 'Deluxe' script
Price from: £25.90 each (£31.08 inc. VAT)
Chromium 'Deluxe' script badge
details
E250-AM-1 - Anglia Standard pillar badge
Price from: £31.51 each (£37.81 inc. VAT)
chrome plate round badge with black backing for rear quarter panel
details
paint - body paint
Price from: £0.05 (£0.06 inc. VAT)
we regret we do not cover paints or finishes, nor do we have paint swatch colour shades. please contact either of the following specialist paint suppliers Classic Car Paints Direct or The Car...
details
panel - body panel and repair panels
Price from: £0.05 (£0.06 inc. VAT)
we do NOT hold these parts, please contact
details
117393-ES - Chrome body moulding / trim clip
Price from: £4.95 pkt 10 (£5.94 inc. VAT)
Replacement plastic moulded side trim moulding clip/rivet, for fixing body moulding strips to vehicle side. to fit trims with 5.25mm gap (measurements on larger image). this clip is a moulding...
details
E98/E99-AM-1 - chrome rear wing moulding
Price from: £45.17 pair (£54.20 inc. VAT)
chrome moulding for rear body finish, offered in left and right pieces together as a pair. new manufacture
details
E243/244-PD-1 - chrome super wing finish trim chevron
Price from: £61.95 pair (£74.34 inc. VAT)
front chrome chevron pints as fitted to Super model front wing/fender for two side strip end finish. offered as a pair only, one piece each E243-PD-1 and E244-PD-1 parts.
details
COM.PL-105E - chassis commission plate
Price from: £8.34 each (£10.01 inc. VAT)
black on aluminium, diagonal format, blank chassis commission plate, used until December 1964
details
carpet - fitted carpet set
Price from: £0.05
we do not offer fitted carpet sets because of choice and selection of colour etc, please click the enclosed link coverdale carpets

DO NOT BUY THIS PART - YOU WILL GET NOTHING.
details
7Y-949624-STD - Hinge pin std
Price from: £8.77 each (£10.52 inc. VAT)
Replacement hinge pin, standard size, dimensions 65mm overall length x 7.2mm stem diameter (knurling under head 7.5mm approx)
details
E506/7-AM-1 - boot lid "super" chrome spears
Price from: £95.39 pair (£114.47 inc. VAT)
boot lid chrome spears fitted to 'super' model saloon. per pair left and right. fit on the back edge of the boot from the handle plinth out towards the boot side edge, one each E506-AM-1 and E507-AM-1
details
116E-8100 - Radiator pressure cap
Price from: £8.21 each (£9.85 inc. VAT)
Radiator pressure cap, 10lb pressure, 1-1/8" reach, 1198cc engine.
details
E199-NC-1 - Rear lamp gasket
Price from: £3.73 each (£4.48 inc. VAT)
Upper lamp housing to body gasket
details
100E-2297 - Brake return pull spring
Price from: £7.83 each (£9.40 inc. VAT)
Rear brake pull return spring, overall length 89mm, 9.4mm diameter,
details
105E-17523 - windscreen wiper mounting grommet
Price from: £0.89 each (£1.07 inc. VAT)
rubber pad, o/d 26mm i/d 14mm, thickness 3mm.
details
COM.PL-105 - chassis commission plate - rectangle
Price from: £8.34 each (£10.01 inc. VAT)
black on aluminium, rectangular, blank chassis commission plate used January 1965 onward.
details
204E-8100 - radiator pressure cap
Price from: £8.21 each (£9.85 inc. VAT)
radiator pressure cap, 7lb pressure, 1-1/4" reach105E - 997cc engineConsul 375 Mk2 - 1701cc engine
details
792 - Rigid window channel - For 4.7mm to 6.4mm thick glass
Price from: £20.95 each (£25.14 inc. VAT)
Rigid single channel felt/rubber/moquette lined, approx 14mm wide x 14mm high, glass 4.7mm to 6.4mm. 
Sold as 2 metre lengths but can be cut to reduce delivery charges.
Postal service can...
details
488 - Flexible window channel - For 4.7mm to 6.4mm thick glass
Price from: £8.97 metre (£10.76 inc. VAT)
Flexible metal single channel, felt/rubber/moquette lined, overall width approx 14.5mm, height 13mm. For glass thickness 4.7mm to 6.4mm. Black woven edge. Our best selling window channel
details
489 - Window weatherstrip - Galvanised edge bead, 5mm x 17mm
Price from: £11.30 2mtr length (£13.56 inc. VAT)
Weatherstrip for exterior or interior use. Fitted between the door and the opening window glass. 17mm high, 5mm deep, with galvanised edge bead, one side plush fur pile finish.
Sold per 2m length...
details
105E-8620 - fan belt
Price from: £15.30 each (£18.36 inc. VAT)
V fan-belt to fit Ford 105E, 106E, 107E, 108E and 307E
details
105E-8501 - Water pump
Price from: £82.01 each (£98.41 inc. VAT)
Water pump. also fits later models. Quinton Hazell reference QCP181. dimension from block face to pulley 3.33 inch, pulley hud diameter 0.79 inch. application also: Ford Escort 1100 1300 & Gt...
details
105E-8286 - Bottom radiator hose
Price from: £30.53 each (£36.64 inc. VAT)
details
105E-8260 - top radiator hose
Price from: £28.40 each (£34.08 inc. VAT)
details
105E-12300 - Condenser
Price from: £5.91 each (£7.09 inc. VAT)
details
C6AH-12300-A - Condenser
Price from: £6.95 each (£8.34 inc. VAT)
Condenser for late distributors on 105E model 1966 to 1968. Autolite type, as part reference Ford part C6AH-12300-A. Motorcraft EDC2, CI ref CON75, also application Ford Fiesta 1976 onward, Escort...
details
681F-12107-AA - contact set / points
Price from: £9.66 each (£11.59 inc. VAT)
Contact set / ignition points set for late distributors on 105E model 1966 to 1968. Lucas type DSB753. As part reference Ford part 681F-12107-AA, Motorcraft EDP1, Ci ref CS110. Also application...
details
C6AH-12106-A - distributor cap
Price from: £16.03 each (£19.24 inc. VAT)
distributor cap for late 105E model 1965 on. push in connections. also fitted to Ford Fiesta 1976 on, Ford Escort 1100/1300 1971 on, Ford Escort, Mexico, RS1800, RS200 1970 on, Corsair (1966-70),...
details
105E-12116-B - Distributor cap - side exit
Price from: £34.91 each (£41.89 inc. VAT)
Distributor cap (side outlet) for Lucas distributors, part ref DDB101 which replaces Lucas 54412472 and also Lucas 422905.
details
EOTA-12199-C - Distributor contact points set
Price from: £5.85 each (£7.02 inc. VAT)
details
YE-12200-C - Distributor rotor arm
Price from: £5.85 each (£7.02 inc. VAT)
Lucas reference 400051 or 405468 - fitted to wide range of vehicles through to approx 1973.
details
105E-10001-B - Dynamo / generator 12v
Price from: £148.00 each (£177.60 inc. VAT)
Dynamo / generator 12 volt. New made part (not refurbished)
details
E0A-13011 - 7" British Pre-focus headlamp unit - NO side lamp hole
Price from: £48.90 each (£58.68 inc. VAT)
7" Headlamp unit for British Pre-focus type bulbs. Lucas Classic product - 700 type. Please note that this part is marked right hand drive, though the actual bulb fitted can govern the dip...
details